From: Inki Dae <inki.dae@samsung.com>
To: Andrzej Hajda <a.hajda@samsung.com>,
dri-devel@lists.freedesktop.org,
Krzysztof Kozlowski <krzk@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH v3 4/7] drm/exynos/hdmi: add bridge support
Date: Fri, 03 Feb 2017 15:39:33 +0900 [thread overview]
Message-ID: <589425A5.8060302@samsung.com> (raw)
In-Reply-To: <58942572.604@samsung.com>
2017년 02월 03일 15:38에 Inki Dae 이(가) 쓴 글:
>
>
> 2017년 02월 01일 17:29에 Andrzej Hajda 이(가) 쓴 글:
>> On TM2/TM2e platforms HDMI output is connected to MHL bridge
>> SiI8620. To allow configure UltraHD modes on the bridge
>> and to eliminate unsupported modes this bridge should be
>> attached to drm_encoder implemented in exynos_hdmi.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
>> ---
>> drivers/gpu/drm/exynos/exynos_hdmi.c | 56 +++++++++++++++++++++++++++++-------
>> 1 file changed, 46 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> index a73b192..41fb894 100644
>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> @@ -35,6 +35,7 @@
>> #include <linux/io.h>
>> #include <linux/of_address.h>
>> #include <linux/of_device.h>
>> +#include <linux/of_graph.h>
>> #include <linux/hdmi.h>
>> #include <linux/component.h>
>> #include <linux/mfd/syscon.h>
>> @@ -133,6 +134,7 @@ struct hdmi_context {
>> struct regulator_bulk_data regul_bulk[ARRAY_SIZE(supply)];
>> struct regulator *reg_hdmi_en;
>> struct exynos_drm_clk phy_clk;
>> + struct drm_bridge *bridge;
>> };
>>
>> static inline struct hdmi_context *encoder_to_hdmi(struct drm_encoder *e)
>> @@ -922,7 +924,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
>> drm_connector_register(connector);
>> drm_mode_connector_attach_encoder(connector, encoder);
>>
>> - return 0;
>> + if (hdata->bridge) {
>> + encoder->bridge = hdata->bridge;
>> + hdata->bridge->encoder = encoder;
>> + ret = drm_bridge_attach(encoder->dev, hdata->bridge);
>
> arguments of drm_bridge_attach function has been changed so fixed it - trivial thing.
> Applied it including other patches.
The argument was changed by below patch,
drm: bridge: Link encoder and bridge in core code
Thanks.
>
> Thanks,
> Inki Dae
>
>> + if (ret)
>> + DRM_ERROR("Failed to attach bridge\n");
>> + }
>> +
>> + return ret;
>> }
>>
>> static bool hdmi_mode_fixup(struct drm_encoder *encoder,
>> @@ -1591,6 +1601,31 @@ static void hdmiphy_clk_enable(struct exynos_drm_clk *clk, bool enable)
>> hdmiphy_disable(hdata);
>> }
>>
>> +static int hdmi_bridge_init(struct hdmi_context *hdata)
>> +{
>> + struct device *dev = hdata->dev;
>> + struct device_node *ep, *np;
>> +
>> + ep = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
>> + if (!ep)
>> + return 0;
>> +
>> + np = of_graph_get_remote_port_parent(ep);
>> + of_node_put(ep);
>> + if (!np) {
>> + DRM_ERROR("failed to get remote port parent");
>> + return -EINVAL;
>> + }
>> +
>> + hdata->bridge = of_drm_find_bridge(np);
>> + of_node_put(np);
>> +
>> + if (!hdata->bridge)
>> + return -EPROBE_DEFER;
>> +
>> + return 0;
>> +}
>> +
>> static int hdmi_resources_init(struct hdmi_context *hdata)
>> {
>> struct device *dev = hdata->dev;
>> @@ -1630,17 +1665,18 @@ static int hdmi_resources_init(struct hdmi_context *hdata)
>>
>> hdata->reg_hdmi_en = devm_regulator_get_optional(dev, "hdmi-en");
>>
>> - if (PTR_ERR(hdata->reg_hdmi_en) == -ENODEV)
>> - return 0;
>> + if (PTR_ERR(hdata->reg_hdmi_en) != -ENODEV) {
>> + if (IS_ERR(hdata->reg_hdmi_en))
>> + return PTR_ERR(hdata->reg_hdmi_en);
>>
>> - if (IS_ERR(hdata->reg_hdmi_en))
>> - return PTR_ERR(hdata->reg_hdmi_en);
>> -
>> - ret = regulator_enable(hdata->reg_hdmi_en);
>> - if (ret)
>> - DRM_ERROR("failed to enable hdmi-en regulator\n");
>> + ret = regulator_enable(hdata->reg_hdmi_en);
>> + if (ret) {
>> + DRM_ERROR("failed to enable hdmi-en regulator\n");
>> + return ret;
>> + }
>> + }
>>
>> - return ret;
>> + return hdmi_bridge_init(hdata);
>> }
>>
>> static struct of_device_id hdmi_match_types[] = {
>>
next prev parent reply other threads:[~2017-02-03 6:40 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170120065229eucas1p22f0eed53220820b1145294029d4bd706@eucas1p2.samsung.com>
2017-01-20 6:52 ` [PATCH 0/7] drm/exynos: add Ultra HD and interlace modes support to Exynos5433 Andrzej Hajda
2017-01-20 6:52 ` [PATCH 1/7] drm/exynos/hdmi: add 297MHz pixel clock support Andrzej Hajda
2017-01-20 6:52 ` [PATCH 2/7] drm/exynos/hdmi: fix VSI infoframe registers Andrzej Hajda
2017-01-20 6:52 ` [PATCH 3/7] drm/exynos/hdmi: fix PLL for 27MHz settings Andrzej Hajda
2017-01-20 6:52 ` [PATCH 4/7] drm/exynos/hdmi: add bridge support Andrzej Hajda
2017-02-01 7:31 ` Inki Dae
2017-02-01 7:34 ` Andrzej Hajda
2017-02-01 7:44 ` Inki Dae
2017-02-01 8:12 ` Andrzej Hajda
2017-02-01 8:17 ` Inki Dae
2017-02-01 8:29 ` [PATCH v3 " Andrzej Hajda
2017-02-03 6:38 ` Inki Dae
2017-02-03 6:39 ` Inki Dae [this message]
2017-01-20 6:52 ` [PATCH 5/7] drm/exynos/decon5433: add support for interlace modes Andrzej Hajda
2017-01-20 6:52 ` [PATCH 6/7] drm/exynos/decon5433: signal vblank only on odd fields Andrzej Hajda
2017-01-20 13:55 ` Ville Syrjälä
2017-01-23 9:15 ` Andrzej Hajda
2017-01-25 14:06 ` Ville Syrjälä
2017-01-26 8:22 ` Andrzej Hajda
2017-01-26 10:42 ` Ville Syrjälä
2017-01-20 6:52 ` [PATCH 7/7] arm64: dts: exynos: configure TV path clocks for Ultra HD modes Andrzej Hajda
2017-01-20 14:51 ` Krzysztof Kozlowski
2017-01-23 7:56 ` [PATCH v2 " Andrzej Hajda
2017-01-23 9:08 ` Marek Szyprowski
2017-01-23 10:05 ` [PATCH v3 " Andrzej Hajda
2017-01-23 16:35 ` Krzysztof Kozlowski
2017-01-20 14:49 ` [PATCH 0/7] drm/exynos: add Ultra HD and interlace modes support to Exynos5433 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=589425A5.8060302@samsung.com \
--to=inki.dae@samsung.com \
--cc=a.hajda@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).