public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Evgenii Shatokhin <eugene.shatokhin@yandex.ru>
To: Kees Cook <keescook@chromium.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>,
	linux-doc@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: Re: [PATCH] hibernation: on 32-bit x86, disabled in favor of KASLR
Date: Thu, 23 Mar 2017 16:23:45 +0300	[thread overview]
Message-ID: <58D3CC61.8080609@yandex.ru> (raw)
In-Reply-To: <20170323002701.GA90470@beast>

On 23.03.2017 03:27, Kees Cook wrote:
> This is a modified revert of commit 65fe935dd238 ("x86/KASLR, x86/power:
> Remove x86 hibernation restrictions"), since it appears that 32-bit
> hibernation still can't support KASLR. 64-bit is fine. Since people have
> been running with KASLR by default on 32-bit since v4.8, this disables
> hibernation (with a warning). Booting with "nokaslr" will disable KASLR
> and enable hibernation.
>
> Reported-by: Evgenii Shatokhin <eugene.shatokhin@yandex.ru>
> Signed-off-by: Kees Cook <keescook@chromium.org>
> Cc: stable@vger.kernel.org # v4.8+

The patch does not work as intended on my system, unfortunately.

I tried the mainline kernel v4.11-rc3 and added this patch. With 
"nokaslr" in the kernel command line, the system fails to hibernate. It 
complains this way in the log:

<...>
kernel: PM: writing image.
kernel: PM: Cannot find swap device, try swapon -a.
kernel: PM: Cannot get swap writer
kernel: PM: Basic memory bitmaps freed
kernel: Restarting tasks ... done.
systemd[1]: Time has been changed
systemd[3948]: Time has been changed
systemd[14825]: Time has been changed
systemd[1]: systemd-hibernate.service: main process exited, code=exited, 
status=1/FAILURE
systemd[1]: Failed to start Hibernate.
<...>

The swap device (swap file, actually) is available, however:
-------------
# swapon -s
Filename  Type  Size    Used  Priority
/swap     file  6297596 0     -1
-------------

I built the same kernel without this patch then, added "nokaslr" in the 
kernel command line again, and the system hibernates and resumes fine.

> ---
>   Documentation/admin-guide/kernel-parameters.txt |  5 +++++
>   arch/x86/boot/compressed/kaslr.c                |  3 +++
>   kernel/power/hibernate.c                        | 18 +++++++++++++++++-
>   3 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 2ba45caabada..6f899c7f587d 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -1725,6 +1725,11 @@
>   			kernel and module base offset ASLR (Address Space
>   			Layout Randomization).
>
> +			On 32-bit x86 with CONFIG_HIBERNATION, hibernation
> +			is disabled if KASLR is enabled. If "nokaslr" is
> +			specified, KASLR will be diabled and hibernation
> +			will be enabled.
> +
>   	keepinitrd	[HW,ARM]
>
>   	kernelcore=	[KNL,X86,IA-64,PPC]
> diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
> index 8b7c9e75edcb..b694af45f1e0 100644
> --- a/arch/x86/boot/compressed/kaslr.c
> +++ b/arch/x86/boot/compressed/kaslr.c
> @@ -572,6 +572,9 @@ void choose_random_location(unsigned long input,
>   		return;
>   	}
>
> +	if (IS_ENABLED(CONFIG_X86_32) && IS_ENABLED(CONFIG_HIBERNATION))
> +		warn("KASLR active: hibernation disabled on 32-bit x86.");
> +
>   	boot_params->hdr.loadflags |= KASLR_FLAG;
>
>   	/* Prepare to add new identity pagetables on demand. */
> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> index a8b978c35a6a..1d8f1fe1b7f4 100644
> --- a/kernel/power/hibernate.c
> +++ b/kernel/power/hibernate.c
> @@ -37,9 +37,14 @@
>   #include "power.h"
>
>
> -static int nocompress;
> +#if defined(CONFIG_X86_32) && defined(CONFIG_RANDOMIZE_BASE)
> +static int noresume = 1;
> +static int nohibernate = 1;
> +#else
>   static int noresume;
>   static int nohibernate;
> +#endif
> +static int nocompress;
>   static int resume_wait;
>   static unsigned int resume_delay;
>   static char resume_file[256] = CONFIG_PM_STD_PARTITION;
> @@ -1194,3 +1199,14 @@ __setup("hibernate=", hibernate_setup);
>   __setup("resumewait", resumewait_setup);
>   __setup("resumedelay=", resumedelay_setup);
>   __setup("nohibernate", nohibernate_setup);
> +
> +/* Allow hibernation to be disabled in favor of KASLR on 32-bit x86. */
> +#if defined(CONFIG_X86_32) && defined(CONFIG_RANDOMIZE_BASE)
> +static int __init nokaslr_hibernate_setup(char *str)
> +{
> +	noresume = 0;
> +	nohibernate = 0;
> +	return 1;
> +}
> +__setup("nokaslr", nokaslr_hibernate_setup);
> +#endif
>

  parent reply	other threads:[~2017-03-23 13:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-23  0:27 [PATCH] hibernation: on 32-bit x86, disabled in favor of KASLR Kees Cook
2017-03-23  1:10 ` Rafael J. Wysocki
2017-03-23 13:23 ` Evgenii Shatokhin [this message]
2017-03-23 15:30   ` Rafael J. Wysocki
2017-03-25 14:54     ` Evgenii Shatokhin
2017-03-25 17:02       ` Kees Cook
2017-03-23 16:38   ` Yu Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58D3CC61.8080609@yandex.ru \
    --to=eugene.shatokhin@yandex.ru \
    --cc=hpa@zytor.com \
    --cc=keescook@chromium.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=rjw@rjwysocki.net \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox