[PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* [PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC
@ 2017-03-30  6:48 Wang Xiaoyin
  2017-03-30  6:48 ` [PATCH 2/2] arm64: dts: add pinctrl dtsi file for HiKey960 development board Wang Xiaoyin
  2017-04-08  6:42 ` [PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC Wei Xu
  0 siblings, 2 replies; 3+ messages in thread
From: Wang Xiaoyin @ 2017-03-30  6:48 UTC (permalink / raw)
  To: xuwei5, robh+dt, mark.rutland, catalin.marinas, will.deacon,
	linux-arm-kernel, devicetree, linux-kernel
  Cc: hw.wangxiaoyin, chenya99

Add drive-strength levels of pin for Hi3660 Soc.

Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
---
 include/dt-bindings/pinctrl/hisi.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h
index 38f1ea879ea1..0359bfdc9119 100644
--- a/include/dt-bindings/pinctrl/hisi.h
+++ b/include/dt-bindings/pinctrl/hisi.h
@@ -56,4 +56,19 @@
 #define DRIVE4_08MA	(4 << 4)
 #define DRIVE4_10MA	(6 << 4)
 
+/* drive strength definition for hi3660 */
+#define DRIVE6_MASK	(15 << 4)
+#define DRIVE6_04MA	(0 << 4)
+#define DRIVE6_12MA	(4 << 4)
+#define DRIVE6_19MA	(8 << 4)
+#define DRIVE6_27MA	(10 << 4)
+#define DRIVE6_32MA	(15 << 4)
+#define DRIVE7_02MA	(0 << 4)
+#define DRIVE7_04MA	(1 << 4)
+#define DRIVE7_06MA	(2 << 4)
+#define DRIVE7_08MA	(3 << 4)
+#define DRIVE7_10MA	(4 << 4)
+#define DRIVE7_12MA	(5 << 4)
+#define DRIVE7_14MA	(6 << 4)
+#define DRIVE7_16MA	(7 << 4)
 #endif
-- 
2.11.0-rc2

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH 2/2] arm64: dts: add pinctrl dtsi file for HiKey960 development board
  2017-03-30  6:48 [PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC Wang Xiaoyin
@ 2017-03-30  6:48 ` Wang Xiaoyin
  2017-04-08  6:42 ` [PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC Wei Xu
  1 sibling, 0 replies; 3+ messages in thread
From: Wang Xiaoyin @ 2017-03-30  6:48 UTC (permalink / raw)
  To: xuwei5, robh+dt, mark.rutland, catalin.marinas, will.deacon,
	linux-arm-kernel, devicetree, linux-kernel
  Cc: hw.wangxiaoyin, chenya99

Add pinctrl dtsi file for HiKey960 development board, enable
5 pinmux devices and 1 pinconf device, also include some nodes
of configurations for pins.

Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts  |   1 +
 .../arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi | 407 +++++++++++++++++++++
 2 files changed, 408 insertions(+)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index ff37f0a0aa93..186251ffc6b2 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "hi3660.dtsi"
+#include "hikey960-pinctrl.dtsi"
 
 / {
 	model = "HiKey960";
diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
new file mode 100644
index 000000000000..c2096c6f46c4
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
@@ -0,0 +1,407 @@
+/*
+ * pinctrl dts fils for Hislicon HiKey960 development board
+ *
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+	soc {
+		/* [IOMG_000, IOMG_123] */
+		range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
+		pmx0: pinmux@e896c000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xe896c000 0x0 0x1f0>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <
+				&range 0 7 0
+				&range 8 116 0>;
+
+			isp0_pmx_func: isp0_pmx_func {
+				pinctrl-single,pins = <
+					0x058 MUX_M1 /* ISP_CLK0 */
+					0x064 MUX_M1 /* ISP_SCL0 */
+					0x068 MUX_M1 /* ISP_SDA0 */
+				>;
+			};
+
+			isp1_pmx_func: isp1_pmx_func {
+				pinctrl-single,pins = <
+					0x05c MUX_M1 /* ISP_CLK1 */
+					0x06c MUX_M1 /* ISP_SCL1 */
+					0x070 MUX_M1 /* ISP_SDA1 */
+				>;
+			};
+
+			i2c3_pmx_func: i2c3_pmx_func {
+				pinctrl-single,pins = <
+					0x02c MUX_M1 /* I2C3_SCL */
+					0x030 MUX_M1 /* I2C3_SDA */
+				>;
+			};
+
+			i2c4_pmx_func: i2c4_pmx_func {
+				pinctrl-single,pins = <
+					0x090 MUX_M1 /* I2C4_SCL */
+					0x094 MUX_M1 /* I2C4_SDA */
+				>;
+			};
+
+			pcie_perstn_pmx_func: pcie_perstn_pmx_func {
+				pinctrl-single,pins = <
+					0x15c MUX_M1 /* PCIE_PERST_N */
+				>;
+			};
+
+			usbhub5734_pmx_func: usbhub5734_pmx_func {
+				pinctrl-single,pins = <
+					0x11c MUX_M0 /* GPIO_073 */
+					0x120 MUX_M0 /* GPIO_074 */
+				>;
+			};
+
+			spi1_pmx_func: spi1_pmx_func {
+				pinctrl-single,pins = <
+					0x034 MUX_M1 /* SPI1_CLK */
+					0x038 MUX_M1 /* SPI1_DI */
+					0x03c MUX_M1 /* SPI1_DO */
+					0x040 MUX_M1 /* SPI1_CS_N */
+				>;
+			};
+
+			uart0_pmx_func: uart0_pmx_func {
+				pinctrl-single,pins = <
+					0x0cc MUX_M2 /* UART0_RXD */
+					0x0d0 MUX_M2 /* UART0_TXD */
+					0x0d4 MUX_M2 /* UART0_RXD_M */
+					0x0d8 MUX_M2 /* UART0_TXD_M */
+				>;
+			};
+
+			uart1_pmx_func: uart1_pmx_func {
+				pinctrl-single,pins = <
+					0x0b0 MUX_M2 /* UART1_CTS_N */
+					0x0b4 MUX_M2 /* UART1_RTS_N */
+					0x0a8 MUX_M2 /* UART1_RXD */
+					0x0ac MUX_M2 /* UART1_TXD */
+				>;
+			};
+
+			uart2_pmx_func: uart2_pmx_func {
+				pinctrl-single,pins = <
+					0x0bc MUX_M2 /* UART2_CTS_N */
+					0x0c0 MUX_M2 /* UART2_RTS_N */
+					0x0c8 MUX_M2 /* UART2_RXD */
+					0x0c4 MUX_M2 /* UART2_TXD */
+				>;
+			};
+
+			uart3_pmx_func: uart3_pmx_func {
+				pinctrl-single,pins = <
+					0x0dc MUX_M1 /* UART3_CTS_N */
+					0x0e0 MUX_M1 /* UART3_RTS_N */
+					0x0e4 MUX_M1 /* UART3_RXD */
+					0x0e8 MUX_M1 /* UART3_TXD */
+				>;
+			};
+
+			uart4_pmx_func: uart4_pmx_func {
+				pinctrl-single,pins = <
+					0x0ec MUX_M1 /* UART4_CTS_N */
+					0x0f0 MUX_M1 /* UART4_RTS_N */
+					0x0f4 MUX_M1 /* UART4_RXD */
+					0x0f8 MUX_M1 /* UART4_TXD */
+				>;
+			};
+
+			uart5_pmx_func: uart5_pmx_func {
+				pinctrl-single,pins = <
+					0x0c4 MUX_M3 /* UART5_CTS_N */
+					0x0c8 MUX_M3 /* UART5_RTS_N */
+					0x0bc MUX_M3 /* UART5_RXD */
+					0x0c0 MUX_M3 /* UART5_TXD */
+				>;
+			};
+
+			uart6_pmx_func: uart6_pmx_func {
+				pinctrl-single,pins = <
+					0x0cc MUX_M1 /* UART6_CTS_N */
+					0x0d0 MUX_M1 /* UART6_RTS_N */
+					0x0d4 MUX_M1 /* UART6_RXD */
+					0x0d8 MUX_M1 /* UART6_TXD */
+				>;
+			};
+		};
+
+		/* [IOMG_MMC0_000, IOMG_MMC0_005] */
+		pmx1: pinmux@ff37e000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff37e000 0x0 0x18>;
+			#gpio-range-cells = <0x3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 6 0>;
+
+			sd_pmx_func: sd_pmx_func {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SD_CLK */
+					0x004 MUX_M1 /* SD_CMD */
+					0x008 MUX_M1 /* SD_DATA0 */
+					0x00c MUX_M1 /* SD_DATA1 */
+					0x010 MUX_M1 /* SD_DATA2 */
+					0x014 MUX_M1 /* SD_DATA3 */
+				>;
+			};
+		};
+
+		/* [IOMG_FIX_000, IOMG_FIX_011] */
+		pmx2: pinmux@ff3b6000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff3b6000 0x0 0x30>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 12 0>;
+
+			spi3_pmx_func: spi3_pmx_func {
+				pinctrl-single,pins = <
+					0x008 MUX_M1 /* SPI3_CLK */
+					0x00c MUX_M1 /* SPI3_DI */
+					0x010 MUX_M1 /* SPI3_DO */
+					0x014 MUX_M1 /* SPI3_CS0_N */
+				>;
+			};
+		};
+
+		/* [IOMG_MMC1_000, IOMG_MMC1_005] */
+		pmx3: pinmux@ff3fd000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff3fd000 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 6 0>;
+
+			sdio_pmx_func: sdio_pmx_func {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SDIO_CLK */
+					0x004 MUX_M1 /* SDIO_CMD */
+					0x008 MUX_M1 /* SDIO_DATA0 */
+					0x00c MUX_M1 /* SDIO_DATA1 */
+					0x010 MUX_M1 /* SDIO_DATA2 */
+					0x014 MUX_M1 /* SDIO_DATA3 */
+				>;
+			};
+		};
+
+		/* [IOMG_AO_000, IOMG_AO_041] */
+		pmx4: pinmux@fff11000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xfff11000 0x0 0xa8>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base in node, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 42 0>;
+
+			i2s2_pmx_func: i2s2_pmx_func {
+				pinctrl-single,pins = <
+					0x044 MUX_M1 /* I2S2_DI */
+					0x048 MUX_M1 /* I2S2_DO */
+					0x04c MUX_M1 /* I2S2_XCLK */
+					0x050 MUX_M1 /* I2S2_XFS */
+				>;
+			};
+
+			slimbus_pmx_func: slimbus_pmx_func {
+				pinctrl-single,pins = <
+					0x02c MUX_M1 /* SLIMBUS_CLK */
+					0x030 MUX_M1 /* SLIMBUS_DATA */
+				>;
+			};
+
+			i2c0_pmx_func: i2c0_pmx_func {
+				pinctrl-single,pins = <
+					0x014 MUX_M1 /* I2C0_SCL */
+					0x018 MUX_M1 /* I2C0_SDA */
+				>;
+			};
+
+			i2c1_pmx_func: i2c1_pmx_func {
+				pinctrl-single,pins = <
+					0x01c MUX_M1 /* I2C1_SCL */
+					0x020 MUX_M1 /* I2C1_SDA */
+				>;
+			};
+
+			i2c2_pmx_func: i2c2_pmx_func {
+				pinctrl-single,pins = <
+					0x024 MUX_M1 /* I2C2_SCL */
+					0x028 MUX_M1 /* I2C2_SDA */
+				>;
+			};
+
+			i2c7_pmx_func: i2c7_pmx_func {
+				pinctrl-single,pins = <
+					0x024 MUX_M3 /* I2C7_SCL */
+					0x028 MUX_M3 /* I2C7_SDA */
+				>;
+			};
+
+			spi2_pmx_func: spi2_pmx_func {
+				pinctrl-single,pins = <
+					0x08c MUX_M1 /* SPI2_CLK */
+					0x090 MUX_M1 /* SPI2_DI */
+					0x094 MUX_M1 /* SPI2_DO */
+					0x098 MUX_M1 /* SPI2_CS0_N */
+				>;
+			};
+
+			spi4_pmx_func: spi4_pmx_func {
+				pinctrl-single,pins = <
+					0x08c MUX_M4 /* SPI4_CLK */
+					0x090 MUX_M4 /* SPI4_DI */
+					0x094 MUX_M4 /* SPI4_DO */
+					0x098 MUX_M4 /* SPI4_CS0_N */
+				>;
+			};
+
+			i2s0_pmx_func: i2s0_pmx_func {
+				pinctrl-single,pins = <
+					0x034 MUX_M1 /* I2S0_DI */
+					0x038 MUX_M1 /* I2S0_DO */
+					0x03c MUX_M1 /* I2S0_XCLK */
+					0x040 MUX_M1 /* I2S0_XFS */
+				>;
+			};
+		};
+
+		pmx5: pinmux@ff3fd800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff3fd800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			pinctrl-single,register-width = <32>;
+
+			sdio_clk_cfg_func: sdio_clk_cfg_func {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SDIO_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA
+					DRIVE6_MASK
+				>;
+			};
+
+			sdio_cfg_func: sdio_cfg_func {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SDIO_CMD */
+					0x008 0x0 /* SDIO_DATA0 */
+					0x00c 0x0 /* SDIO_DATA1 */
+					0x010 0x0 /* SDIO_DATA2 */
+					0x014 0x0 /* SDIO_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA
+					DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx6: pinmux@ff37e800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff37e800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			pinctrl-single,register-width = <32>;
+
+			sd_clk_cfg_func: sd_clk_cfg_func {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SD_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA
+					DRIVE6_MASK
+				>;
+			};
+
+			sd_cfg_func: sd_cfg_func {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SD_CMD */
+					0x008 0x0 /* SD_DATA0 */
+					0x00c 0x0 /* SD_DATA1 */
+					0x010 0x0 /* SD_DATA2 */
+					0x014 0x0 /* SD_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA
+					DRIVE6_MASK
+				>;
+			};
+		};
+
+	};
+};
-- 
2.11.0-rc2

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC
  2017-03-30  6:48 [PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC Wang Xiaoyin
  2017-03-30  6:48 ` [PATCH 2/2] arm64: dts: add pinctrl dtsi file for HiKey960 development board Wang Xiaoyin
@ 2017-04-08  6:42 ` Wei Xu
  1 sibling, 0 replies; 3+ messages in thread
From: Wei Xu @ 2017-04-08  6:42 UTC (permalink / raw)
  To: Wang Xiaoyin, robh+dt, mark.rutland, catalin.marinas, will.deacon,
	linux-arm-kernel, devicetree, linux-kernel
  Cc: chenya99

Hi Xiaoyin,

On 2017/3/30 14:48, Wang Xiaoyin wrote:
> Add drive-strength levels of pin for Hi3660 Soc.
>
> Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>

Thanks!
Applied both to the hisilicon arm64 dt tree.

Best Regards,
Wei
> ---
>   include/dt-bindings/pinctrl/hisi.h | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
>
> diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h
> index 38f1ea879ea1..0359bfdc9119 100644
> --- a/include/dt-bindings/pinctrl/hisi.h
> +++ b/include/dt-bindings/pinctrl/hisi.h
> @@ -56,4 +56,19 @@
>   #define DRIVE4_08MA	(4 << 4)
>   #define DRIVE4_10MA	(6 << 4)
>   
> +/* drive strength definition for hi3660 */
> +#define DRIVE6_MASK	(15 << 4)
> +#define DRIVE6_04MA	(0 << 4)
> +#define DRIVE6_12MA	(4 << 4)
> +#define DRIVE6_19MA	(8 << 4)
> +#define DRIVE6_27MA	(10 << 4)
> +#define DRIVE6_32MA	(15 << 4)
> +#define DRIVE7_02MA	(0 << 4)
> +#define DRIVE7_04MA	(1 << 4)
> +#define DRIVE7_06MA	(2 << 4)
> +#define DRIVE7_08MA	(3 << 4)
> +#define DRIVE7_10MA	(4 << 4)
> +#define DRIVE7_12MA	(5 << 4)
> +#define DRIVE7_14MA	(6 << 4)
> +#define DRIVE7_16MA	(7 << 4)
>   #endif

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2017-04-08  6:43 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-30  6:48 [PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC Wang Xiaoyin
2017-03-30  6:48 ` [PATCH 2/2] arm64: dts: add pinctrl dtsi file for HiKey960 development board Wang Xiaoyin
2017-04-08  6:42 ` [PATCH 1/2] arm64: dts: add drive-strength levels of pin for Hi3660 SoC Wei Xu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox