* Re: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
2017-04-25 1:54 ` [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards Hoegeun Kwon
@ 2017-04-25 7:12 ` Inki Dae
2017-04-26 7:22 ` Krzysztof Kozlowski
2017-05-15 16:55 ` Krzysztof Kozlowski
2 siblings, 0 replies; 4+ messages in thread
From: Inki Dae @ 2017-04-25 7:12 UTC (permalink / raw)
To: Hoegeun Kwon, robh+dt, mark.rutland, catalin.marinas, will.deacon,
kgene, krzk
Cc: javier, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, a.hajda
2017년 04월 25일 10:54에 Hoegeun Kwon 이(가) 쓴 글:
> The decon uses HW-TRIGGER, so TE interrupt is not necessary.
> Therefore, remove the te-gpios property in the TM2 dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index 3ff9527..23191eb 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -60,7 +60,6 @@
> vci-supply = <&ldo28_reg>;
> reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
> enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
> - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Thanks,
Inki Dae
> };
> };
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
2017-04-25 1:54 ` [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards Hoegeun Kwon
2017-04-25 7:12 ` Inki Dae
@ 2017-04-26 7:22 ` Krzysztof Kozlowski
2017-05-15 16:55 ` Krzysztof Kozlowski
2 siblings, 0 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2017-04-26 7:22 UTC (permalink / raw)
To: Hoegeun Kwon
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon, kgene,
Javier Martinez Canillas, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel, a.hajda
On Tue, Apr 25, 2017 at 3:54 AM, Hoegeun Kwon <hoegeun.kwon@samsung.com> wrote:
> The decon uses HW-TRIGGER, so TE interrupt is not necessary.
> Therefore, remove the te-gpios property in the TM2 dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
> 1 file changed, 1 deletion(-)
>
Looks correct. It is too late for me for v4.12 so I will pick it up
for v4.13. For my reference:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
2017-04-25 1:54 ` [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards Hoegeun Kwon
2017-04-25 7:12 ` Inki Dae
2017-04-26 7:22 ` Krzysztof Kozlowski
@ 2017-05-15 16:55 ` Krzysztof Kozlowski
2 siblings, 0 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2017-05-15 16:55 UTC (permalink / raw)
To: Hoegeun Kwon
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon, kgene,
javier, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, a.hajda
On Tue, Apr 25, 2017 at 10:54:21AM +0900, Hoegeun Kwon wrote:
> The decon uses HW-TRIGGER, so TE interrupt is not necessary.
> Therefore, remove the te-gpios property in the TM2 dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
> 1 file changed, 1 deletion(-)
>
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 4+ messages in thread