Re: [PATCH v6 7/8] arm64: dts: hikey960: add device node for pmic and regulators

[Wei Xu <xuwei5@hisilicon.com>]

Hi Guodong,

On 2017/6/8 23:08, Guodong Xu wrote:
> From: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
> 
> add device node for hi6421 pmic core and hi6421v530
> voltage regulator,include LDO(1,3,9,11,15,16)
> 
> Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>

Thanks!
Acked-by: Wei Xu <xuwei5@hisilicon.com>

So the whole patch set can be picked up by the Lee
to avoid dependence issue.

BR,
Wei

> ---
>  arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 46 +++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> index ca448f0..e579333 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> @@ -97,6 +97,52 @@
>  			default-state = "off";
>  		};
>  	};
> +
> +	pmic: pmic@fff34000 {
> +		compatible = "hisilicon,hi6421v530-pmic";
> +		reg = <0x0 0xfff34000 0x0 0x1000>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +
> +		regulators {
> +			ldo3: LDO3 { /* HDMI */
> +				regulator-name = "VOUT3_1V85";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <2200000>;
> +				regulator-enable-ramp-delay = <120>;
> +			};
> +
> +			ldo9: LDO9 { /* SDCARD I/O */
> +				regulator-name = "VOUT9_1V8_2V95";
> +				regulator-min-microvolt = <1750000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-enable-ramp-delay = <240>;
> +			};
> +
> +			ldo11: LDO11 { /* Low Speed Connector */
> +				regulator-name = "VOUT11_1V8_2V95";
> +				regulator-min-microvolt = <1750000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-enable-ramp-delay = <240>;
> +			};
> +
> +			ldo15: LDO15 { /* UFS VCC */
> +				regulator-name = "VOUT15_3V0";
> +				regulator-min-microvolt = <1750000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-enable-ramp-delay = <120>;
> +			};
> +
> +			ldo16: LDO16 { /* SD VDD */
> +				regulator-name = "VOUT16_2V95";
> +				regulator-min-microvolt = <1750000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-enable-ramp-delay = <360>;
> +			};
> +		};
> +	};
>  };
>  
>  &i2c0 {
>