Re: [PATCH] perf/core: fix group {cpu,task} validation

[zhouchengming <zhouchengming1@huawei.com>]

On 2017/6/22 22:41, Mark Rutland wrote:
> Regardless of which events form a group, it does not make sense for the
> events to target different tasks and/or CPUs, as this leaves the group
> inconsistent and impossible to schedule. The core perf code assumes that
> these are consistent across (successfully intialised) groups.
>
> Core perf code only verifies this when moving SW events into a HW
> context. Thus, we can violate this requirement for pure SW groups and
> pure HW groups, unless the relevant PMU driver happens to perform this
> verification itself. These mismatched groups subsequently wreak havoc
> elsewhere.
>
> For example, we handle watchpoints as SW events, and reserve watchpoint
> HW on a per-cpu basis at pmu::event_init() time to ensure that any event
> that is initialised is guaranteed to have a slot at pmu::add() time.
> However, the core code only checks the group leader's cpu filter (via
> event_filter_match()), and can thus install follower events onto CPUs
> violating thier (mismatched) CPU filters, potentially installing them
> into a CPU without sufficient reserved slots.
>
> This can be triggered with the below test case, resulting in warnings
> from arch backends.
>
>    #define _GNU_SOURCE
>    #include<linux/hw_breakpoint.h>
>    #include<linux/perf_event.h>
>    #include<sched.h>
>    #include<stdio.h>
>    #include<sys/prctl.h>
>    #include<sys/syscall.h>
>    #include<unistd.h>
>
>    static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
>    			   int group_fd, unsigned long flags)
>    {
>    	return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags);
>    }
>
>    char watched_char;
>
>    struct perf_event_attr wp_attr = {
>    	.type = PERF_TYPE_BREAKPOINT,
>    	.bp_type = HW_BREAKPOINT_RW,
>    	.bp_addr = (unsigned long)&watched_char,
>    	.bp_len = 1,
>    	.size = sizeof(wp_attr),
>    };
>
>    int main(int argc, char *argv[])
>    {
>    	int leader, ret;
>    	cpu_set_t cpus;
>
>    	/*
>    	 * Force use of CPU0 to ensure our CPU0-bound events get scheduled.
>    	 */
>    	CPU_ZERO(&cpus);
>    	CPU_SET(0,&cpus);
>    	ret = sched_setaffinity(0, sizeof(cpus),&cpus);
>    	if (ret) {
>    		printf("Unable to set cpu affinity\n");
>    		return 1;
>    	}
>
>    	/* open leader event, bound to this task, CPU0 only */
>    	leader = perf_event_open(&wp_attr, 0, 0, -1, 0);
>    	if (leader<  0) {
>    		printf("Couldn't open leader: %d\n", leader);
>    		return 1;
>    	}
>
>    	/*
>    	 * Open a follower event that is bound to the same task, but a
>    	 * different CPU. This means that the group should never be possible to
>    	 * schedule.
>    	 */
>    	ret = perf_event_open(&wp_attr, 0, 1, leader, 0);
>    	if (ret<  0) {
>    		printf("Couldn't open mismatched follower: %d\n", ret);
>    		return 1;
>    	} else {
>    		printf("Opened leader/follower with mismastched CPUs\n");
>    	}
>
>    	/*
>    	 * Open as many independent events as we can, all bound to the same
>    	 * task, CPU0 only.
>    	 */
>    	do {
>    		ret = perf_event_open(&wp_attr, 0, 0, -1, 0);
>    	} while (ret>= 0);
>
>    	/*
>    	 * Force enable/disble all events to trigger the erronoeous
>    	 * installation of the follower event.
>    	 */
>    	printf("Opened all events. Toggling..\n");
>    	for (;;) {
>    		prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0);
>    		prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0);
>    	}
>
>    	return 0;
>    }

Very good example!

>
> Fix this by validating this requirement regardless of whether we're
> moving events.
>
> Signed-off-by: Mark Rutland<mark.rutland@arm.com>
> Cc: Alexander Shishkin<alexander.shishkin@linux.intel.com>
> Cc: Arnaldo Carvalho de Melo<acme@kernel.org>
> Cc: Ingo Molnar<mingo@redhat.com>
> Cc: Peter Zijlstra<peterz@infradead.org>
> Cc: Zhou Chengming<zhouchengming1@huawei.com>
> Cc: linux-kernel@vger.kernel.org
> ---
>   kernel/events/core.c | 39 +++++++++++++++++++--------------------
>   1 file changed, 19 insertions(+), 20 deletions(-)
>
> diff --git a/kernel/events/core.c b/kernel/events/core.c
> index 6c4e523..1dca484 100644
> --- a/kernel/events/core.c
> +++ b/kernel/events/core.c
> @@ -10010,28 +10010,27 @@ static int perf_event_set_clock(struct perf_event *event, clockid_t clk_id)
>   			goto err_context;
>
>   		/*
> -		 * Do not allow to attach to a group in a different
> -		 * task or CPU context:
> +		 * Make sure we're both events for the same CPU;
> +		 * grouping events for different CPUs is broken; since
> +		 * you can never concurrently schedule them anyhow.
>   		 */
> -		if (move_group) {
> -			/*
> -			 * Make sure we're both on the same task, or both
> -			 * per-cpu events.
> -			 */
> -			if (group_leader->ctx->task != ctx->task)
> -				goto err_context;
> +		if (group_leader->cpu != event->cpu)
> +			goto err_context;
>
> -			/*
> -			 * Make sure we're both events for the same CPU;
> -			 * grouping events for different CPUs is broken; since
> -			 * you can never concurrently schedule them anyhow.
> -			 */
> -			if (group_leader->cpu != event->cpu)
> -				goto err_context;
> -		} else {
> -			if (group_leader->ctx != ctx)
> -				goto err_context;
> -		}
> +		/*
> +		 * Make sure we're both on the same task, or both
> +		 * per-cpu events.
> +		 */
> +		if (group_leader->ctx->task != ctx->task)
> +			goto err_context;
> +
> +		/*
> +		 * Do not allow to attach to a group in a different task
> +		 * or CPU context. If we're moving SW events, we'll fix
> +		 * this up later, so allow that.
> +		 */
> +		if (!move_group&&  group_leader->ctx != ctx)
> +			goto err_context;

We don't need to check move_group here, the previous two checks already make sure
the events are on the same task and the same cpu.  So when move_group needed, they
will be moved to the same taskctx or cpuctx then.

Thanks.

>
>   		/*
>   		 * Only a group leader can be exclusive or pinned