Re: [PATCH] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"

[Chanwoo Choi <cw00.choi@samsung.com>]

Hi Hans,

Why don't modify the extcon-axp288.c after revert it?
Instead, you sent the patch[1]. Are you going to send other patch for extcon-axp288.c?
[1] [PATCH] extcon: int3496: process id-pin first so that we start with the right status


On 2018년 01월 26일 02:10, Hans de Goede wrote:
> Redoing the charger type detection to give the usb-role-switch code time
> to properly set the role-switch is no good for mainline, since the
> usb-role-switch code is not yet in mainline (my bad, sorry).
> 
> Also once we've that code there are better ways to fix this which are
> not prone to racing as doing a retry after 2 seconds is.
> 
> This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/extcon/extcon-axp288.c | 32 ++------------------------------
>  1 file changed, 2 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index 9abc99e8c0a5..901eddd3994b 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -1,7 +1,6 @@
>  /*
>   * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
>   *
> - * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
>   * Copyright (C) 2015 Intel Corporation
>   * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
>   *
> @@ -98,11 +97,9 @@ struct axp288_extcon_info {
>  	struct device *dev;
>  	struct regmap *regmap;
>  	struct regmap_irq_chip_data *regmap_irqc;
> -	struct delayed_work det_work;
>  	int irq[EXTCON_IRQ_END];
>  	struct extcon_dev *edev;
>  	unsigned int previous_cable;
> -	bool first_detect_done;
>  };
>  
>  /* Power up/down reason string array */
> @@ -140,25 +137,6 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
>  	regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
>  }
>  
> -static void axp288_chrg_detect_complete(struct axp288_extcon_info *info)
> -{
> -	/*
> -	 * We depend on other drivers to do things like mux the data lines,
> -	 * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has
> -	 * not set these things up correctly resulting in the initial charger
> -	 * cable type detection giving a wrong result and we end up not charging
> -	 * or charging at only 0.5A.
> -	 *
> -	 * So we schedule a second cable type detection after 2 seconds to
> -	 * give the other drivers time to load and do their thing.
> -	 */
> -	if (!info->first_detect_done) {
> -		queue_delayed_work(system_wq, &info->det_work,
> -				   msecs_to_jiffies(2000));
> -		info->first_detect_done = true;
> -	}
> -}
> -
>  static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
>  {
>  	int ret, stat, cfg, pwr_stat;
> @@ -223,8 +201,6 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
>  		info->previous_cable = cable;
>  	}
>  
> -	axp288_chrg_detect_complete(info);
> -
>  	return 0;
>  
>  dev_det_ret:
> @@ -246,11 +222,8 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
>  	return IRQ_HANDLED;
>  }
>  
> -static void axp288_extcon_det_work(struct work_struct *work)
> +static void axp288_extcon_enable(struct axp288_extcon_info *info)
>  {
> -	struct axp288_extcon_info *info =
> -		container_of(work, struct axp288_extcon_info, det_work.work);
> -
>  	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
>  						BC_GLOBAL_RUN, 0);
>  	/* Enable the charger detection logic */
> @@ -272,7 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev)
>  	info->regmap = axp20x->regmap;
>  	info->regmap_irqc = axp20x->regmap_irqc;
>  	info->previous_cable = EXTCON_NONE;
> -	INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work);
>  
>  	platform_set_drvdata(pdev, info);
>  
> @@ -315,7 +287,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
>  	}
>  
>  	/* Start charger cable type detection */
> -	queue_delayed_work(system_wq, &info->det_work, 0);
> +	axp288_extcon_enable(info);
>  
>  	return 0;
>  }
> 

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics