* [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array
@ 2018-02-12 19:46 ` Hans de Goede
2018-02-12 19:46 ` [PATCH v3 2/3] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" Hans de Goede
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Hans de Goede @ 2018-02-12 19:46 UTC (permalink / raw)
To: MyungJoo Ham, Chanwoo Choi; +Cc: Hans de Goede, linux-kernel
Make the axp288_pwr_up_down_info array const char * const, this leads
to the following section size changes:
.text 0x674 -> 0x664
.data 0x148 -> 0x0f0
.rodata 0x0b4 -> 0x114
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/extcon/extcon-axp288.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 0a44d43802fe..c8f7b6435679 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -106,7 +106,7 @@ struct axp288_extcon_info {
};
/* Power up/down reason string array */
-static char *axp288_pwr_up_down_info[] = {
+static const char * const axp288_pwr_up_down_info[] = {
"Last wake caused by user pressing the power button",
"Last wake caused by a charger insertion",
"Last wake caused by a battery insertion",
@@ -124,7 +124,7 @@ static char *axp288_pwr_up_down_info[] = {
*/
static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
{
- char **rsi;
+ const char * const *rsi;
unsigned int val, i, clear_mask = 0;
int ret;
--
2.14.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 2/3] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
2018-02-12 19:46 ` [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array Hans de Goede
@ 2018-02-12 19:46 ` Hans de Goede
2018-02-12 21:50 ` Chanwoo Choi
2018-02-12 19:46 ` [PATCH v3 3/3] extcon: int3496: process id-pin first so that we start with the right status Hans de Goede
2018-02-12 21:50 ` [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array Chanwoo Choi
2 siblings, 1 reply; 6+ messages in thread
From: Hans de Goede @ 2018-02-12 19:46 UTC (permalink / raw)
To: MyungJoo Ham, Chanwoo Choi; +Cc: Hans de Goede, linux-kernel
Redoing the charger type detection to give the usb-role-switch code time
to properly set the role-switch is no good for mainline, since the
usb-role-switch code is not yet in mainline (my bad, sorry).
Also once we've that code there are better ways to fix this which are
not prone to racing as doing a retry after 2 seconds is.
This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/extcon/extcon-axp288.c | 32 ++------------------------------
1 file changed, 2 insertions(+), 30 deletions(-)
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index c8f7b6435679..3ec4c715e240 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -1,7 +1,6 @@
/*
* extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
*
- * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2015 Intel Corporation
* Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
*
@@ -98,11 +97,9 @@ struct axp288_extcon_info {
struct device *dev;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
- struct delayed_work det_work;
int irq[EXTCON_IRQ_END];
struct extcon_dev *edev;
unsigned int previous_cable;
- bool first_detect_done;
};
/* Power up/down reason string array */
@@ -140,25 +137,6 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
}
-static void axp288_chrg_detect_complete(struct axp288_extcon_info *info)
-{
- /*
- * We depend on other drivers to do things like mux the data lines,
- * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has
- * not set these things up correctly resulting in the initial charger
- * cable type detection giving a wrong result and we end up not charging
- * or charging at only 0.5A.
- *
- * So we schedule a second cable type detection after 2 seconds to
- * give the other drivers time to load and do their thing.
- */
- if (!info->first_detect_done) {
- queue_delayed_work(system_wq, &info->det_work,
- msecs_to_jiffies(2000));
- info->first_detect_done = true;
- }
-}
-
static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
{
int ret, stat, cfg, pwr_stat;
@@ -223,8 +201,6 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
info->previous_cable = cable;
}
- axp288_chrg_detect_complete(info);
-
return 0;
dev_det_ret:
@@ -246,11 +222,8 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
return IRQ_HANDLED;
}
-static void axp288_extcon_det_work(struct work_struct *work)
+static void axp288_extcon_enable(struct axp288_extcon_info *info)
{
- struct axp288_extcon_info *info =
- container_of(work, struct axp288_extcon_info, det_work.work);
-
regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
BC_GLOBAL_RUN, 0);
/* Enable the charger detection logic */
@@ -272,7 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev)
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->previous_cable = EXTCON_NONE;
- INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work);
platform_set_drvdata(pdev, info);
@@ -318,7 +290,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
}
/* Start charger cable type detection */
- queue_delayed_work(system_wq, &info->det_work, 0);
+ axp288_extcon_enable(info);
return 0;
}
--
2.14.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 3/3] extcon: int3496: process id-pin first so that we start with the right status
2018-02-12 19:46 ` [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array Hans de Goede
2018-02-12 19:46 ` [PATCH v3 2/3] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" Hans de Goede
@ 2018-02-12 19:46 ` Hans de Goede
2018-02-12 21:50 ` Chanwoo Choi
2018-02-12 21:50 ` [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array Chanwoo Choi
2 siblings, 1 reply; 6+ messages in thread
From: Hans de Goede @ 2018-02-12 19:46 UTC (permalink / raw)
To: MyungJoo Ham, Chanwoo Choi; +Cc: Hans de Goede, linux-kernel, stable
Some other drivers may be waiting for our extcon to show-up (exiting their
probe methods with -EPROBE_DEFER until we show up).
These drivers will typically get the cable state directly after getting
the extcon, this commit changes the int3496 code to process the id-pin
before registering the extcon, so that other drivers see the correct state
right away.
Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI ... driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Add Fixes tag
Changes in v3:
-Fix oops on probe by scheduling the work too early
---
drivers/extcon/extcon-intel-int3496.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index c8691b5a9cb0..673bb26a9a2a 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -131,11 +131,15 @@ static int int3496_probe(struct platform_device *pdev)
if (IS_ERR(data->gpio_usb_mux))
dev_info(dev, "can't request USB MUX GPIO\n");
- /* register extcon device */
data->edev = devm_extcon_dev_allocate(dev, int3496_cable);
if (IS_ERR(data->edev))
return -ENOMEM;
+ /* process id-pin first so that we start with the right status */
+ queue_delayed_work(system_wq, &data->work, 0);
+ flush_delayed_work(&data->work);
+
+ /* register extcon device */
ret = devm_extcon_dev_register(dev, data->edev);
if (ret < 0) {
dev_err(dev, "can't register extcon device: %d\n", ret);
@@ -153,9 +157,6 @@ static int int3496_probe(struct platform_device *pdev)
return ret;
}
- /* queue initial processing of id-pin */
- queue_delayed_work(system_wq, &data->work, 0);
-
platform_set_drvdata(pdev, data);
return 0;
--
2.14.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array
2018-02-12 19:46 ` [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array Hans de Goede
2018-02-12 19:46 ` [PATCH v3 2/3] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" Hans de Goede
2018-02-12 19:46 ` [PATCH v3 3/3] extcon: int3496: process id-pin first so that we start with the right status Hans de Goede
@ 2018-02-12 21:50 ` Chanwoo Choi
2 siblings, 0 replies; 6+ messages in thread
From: Chanwoo Choi @ 2018-02-12 21:50 UTC (permalink / raw)
To: Hans de Goede, MyungJoo Ham; +Cc: linux-kernel
On 2018년 02월 13일 04:46, Hans de Goede wrote:
> Make the axp288_pwr_up_down_info array const char * const, this leads
> to the following section size changes:
>
> .text 0x674 -> 0x664
> .data 0x148 -> 0x0f0
> .rodata 0x0b4 -> 0x114
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/extcon/extcon-axp288.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index 0a44d43802fe..c8f7b6435679 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -106,7 +106,7 @@ struct axp288_extcon_info {
> };
>
> /* Power up/down reason string array */
> -static char *axp288_pwr_up_down_info[] = {
> +static const char * const axp288_pwr_up_down_info[] = {
> "Last wake caused by user pressing the power button",
> "Last wake caused by a charger insertion",
> "Last wake caused by a battery insertion",
> @@ -124,7 +124,7 @@ static char *axp288_pwr_up_down_info[] = {
> */
> static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
> {
> - char **rsi;
> + const char * const *rsi;
> unsigned int val, i, clear_mask = 0;
> int ret;
>
>
Applied it.
--
Best Regards,
Chanwoo Choi
Samsung Electronics
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/3] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
2018-02-12 19:46 ` [PATCH v3 2/3] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" Hans de Goede
@ 2018-02-12 21:50 ` Chanwoo Choi
0 siblings, 0 replies; 6+ messages in thread
From: Chanwoo Choi @ 2018-02-12 21:50 UTC (permalink / raw)
To: Hans de Goede, MyungJoo Ham; +Cc: linux-kernel
On 2018년 02월 13일 04:46, Hans de Goede wrote:
> Redoing the charger type detection to give the usb-role-switch code time
> to properly set the role-switch is no good for mainline, since the
> usb-role-switch code is not yet in mainline (my bad, sorry).
>
> Also once we've that code there are better ways to fix this which are
> not prone to racing as doing a retry after 2 seconds is.
>
> This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/extcon/extcon-axp288.c | 32 ++------------------------------
> 1 file changed, 2 insertions(+), 30 deletions(-)
Applied it.
[snip]
--
Best Regards,
Chanwoo Choi
Samsung Electronics
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 3/3] extcon: int3496: process id-pin first so that we start with the right status
2018-02-12 19:46 ` [PATCH v3 3/3] extcon: int3496: process id-pin first so that we start with the right status Hans de Goede
@ 2018-02-12 21:50 ` Chanwoo Choi
0 siblings, 0 replies; 6+ messages in thread
From: Chanwoo Choi @ 2018-02-12 21:50 UTC (permalink / raw)
To: Hans de Goede, MyungJoo Ham; +Cc: linux-kernel, stable
On 2018년 02월 13일 04:46, Hans de Goede wrote:
> Some other drivers may be waiting for our extcon to show-up (exiting their
> probe methods with -EPROBE_DEFER until we show up).
>
> These drivers will typically get the cable state directly after getting
> the extcon, this commit changes the int3496 code to process the id-pin
> before registering the extcon, so that other drivers see the correct state
> right away.
>
> Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI ... driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Add Fixes tag
>
> Changes in v3:
> -Fix oops on probe by scheduling the work too early
> ---
> drivers/extcon/extcon-intel-int3496.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
> index c8691b5a9cb0..673bb26a9a2a 100644
> --- a/drivers/extcon/extcon-intel-int3496.c
> +++ b/drivers/extcon/extcon-intel-int3496.c
> @@ -131,11 +131,15 @@ static int int3496_probe(struct platform_device *pdev)
> if (IS_ERR(data->gpio_usb_mux))
> dev_info(dev, "can't request USB MUX GPIO\n");
>
> - /* register extcon device */
> data->edev = devm_extcon_dev_allocate(dev, int3496_cable);
> if (IS_ERR(data->edev))
> return -ENOMEM;
>
> + /* process id-pin first so that we start with the right status */
> + queue_delayed_work(system_wq, &data->work, 0);
> + flush_delayed_work(&data->work);
> +
> + /* register extcon device */
> ret = devm_extcon_dev_register(dev, data->edev);
> if (ret < 0) {
> dev_err(dev, "can't register extcon device: %d\n", ret);
> @@ -153,9 +157,6 @@ static int int3496_probe(struct platform_device *pdev)
> return ret;
> }
>
> - /* queue initial processing of id-pin */
> - queue_delayed_work(system_wq, &data->work, 0);
> -
> platform_set_drvdata(pdev, data);
>
> return 0;
>
Applied it.
--
Best Regards,
Chanwoo Choi
Samsung Electronics
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-02-12 21:50 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20180212194646epcas3p4de9a5b929ea45edb11f7e5b509b6cf98@epcas3p4.samsung.com>
2018-02-12 19:46 ` [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array Hans de Goede
2018-02-12 19:46 ` [PATCH v3 2/3] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" Hans de Goede
2018-02-12 21:50 ` Chanwoo Choi
2018-02-12 19:46 ` [PATCH v3 3/3] extcon: int3496: process id-pin first so that we start with the right status Hans de Goede
2018-02-12 21:50 ` Chanwoo Choi
2018-02-12 21:50 ` [PATCH v3 1/3] extcon: axp288: Constify the axp288_pwr_up_down_info array Chanwoo Choi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).