Re: [PATCH v2] extcon: int3496: Ignore incorrect IoRestriction for ID pin

[Chanwoo Choi <cw00.choi@samsung.com>]

On 2018년 03월 01일 01:22, Andy Shevchenko wrote:
> The commit
> 
>   70216fd937fe ("extcon: int3496: Set the id pin to direction-input if necessary")
> 
> introduced a workaround for incorrect IoRestriction mode in ACPI table.
> 
> Now, when GPIO ACPI library does it in generic way, see the commit
> 
>   1b2ca32ab0b8 ("gpiolib: acpi: Introduce NO_RESTRICTION quirk")
> 
> for the details, just set an appropriate quirk flag instead.
> 
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> Tested-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> - add tags
> - address comments from Chanwoo
>  drivers/extcon/extcon-intel-int3496.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
> index 191e99f06a9a..acaccb128fc4 100644
> --- a/drivers/extcon/extcon-intel-int3496.c
> +++ b/drivers/extcon/extcon-intel-int3496.c
> @@ -50,7 +50,11 @@ static const struct acpi_gpio_params vbus_gpios = { INT3496_GPIO_VBUS_EN, 0, fal
>  static const struct acpi_gpio_params mux_gpios = { INT3496_GPIO_USB_MUX, 0, false };
>  
>  static const struct acpi_gpio_mapping acpi_int3496_default_gpios[] = {
> -	{ "id-gpios", &id_gpios, 1 },
> +	/*
> +	 * Some platforms have a bug in ACPI GPIO description making IRQ
> +	 * GPIO to be output only. Ask the GPIO core to ignore this limit.
> +	 */
> +	{ "id-gpios", &id_gpios, 1, ACPI_GPIO_QUIRK_NO_IO_RESTRICTION },
>  	{ "vbus-gpios", &vbus_gpios, 1 },
>  	{ "mux-gpios", &mux_gpios, 1 },
>  	{ },
> @@ -112,9 +116,6 @@ static int int3496_probe(struct platform_device *pdev)
>  		ret = PTR_ERR(data->gpio_usb_id);
>  		dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
>  		return ret;
> -	} else if (gpiod_get_direction(data->gpio_usb_id) != GPIOF_DIR_IN) {
> -		dev_warn(dev, FW_BUG "USB ID GPIO not in input mode, fixing\n");
> -		gpiod_direction_input(data->gpio_usb_id);
>  	}
>  
>  	data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
> 

Applied it. Thanks.

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics