linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: Pawel Laszczak <pawell@cadence.com>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Alan Douglas <adouglas@cadence.com>,
	"jbergsagel@ti.com" <jbergsagel@ti.com>,
	"peter.chen@nxp.com" <peter.chen@nxp.com>,
	Pawel Jez <pjez@cadence.com>, Rahul Kumar <kurahul@cadence.com>
Subject: Re: [RFC PATCH v1 14/14] usb:cdns3: Feature for changing role
Date: Thu, 8 Nov 2018 16:22:56 +0200	[thread overview]
Message-ID: <5BE446C0.6080706@ti.com> (raw)
In-Reply-To: <BYAPR07MB4709524FC194D27BE6128ABADDC50@BYAPR07MB4709.namprd07.prod.outlook.com>

On 08/11/18 13:51, Pawel Laszczak wrote:
>> On 03/11/18 19:51, Pawel Laszczak wrote:
>>> Patch adds feature that allow to change role from user space.
>>>
>>> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
>>> ---
>>>  drivers/usb/cdns3/Makefile  |  2 +-
>>>  drivers/usb/cdns3/core.c    |  2 +
>>>  drivers/usb/cdns3/debugfs.c | 94 +++++++++++++++++++++++++++++++++++++
>>>  drivers/usb/cdns3/drd.h     |  3 ++
>>>  4 files changed, 100 insertions(+), 1 deletion(-)
>>>  create mode 100644 drivers/usb/cdns3/debugfs.c
>>>
>>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>>> index 34e60d03c4ec..08e6cdbebd46 100644
>>> --- a/drivers/usb/cdns3/Makefile
>>> +++ b/drivers/usb/cdns3/Makefile
>>> @@ -1,7 +1,7 @@
>>>  obj-$(CONFIG_USB_CDNS3)			+= cdns3.o
>>>  obj-$(CONFIG_USB_CDNS3_PCI_WRAP)	+= cdns3-pci.o
>>>
>>> -cdns3-y					:= core.o drd.o
>>> +cdns3-y					:= core.o drd.o debugfs.o
>>>  cdns3-$(CONFIG_USB_CDNS3_GADGET)	+= gadget.o ep0.o debug.o
>>>  cdns3-$(CONFIG_USB_CDNS3_HOST)		+= host.o
>>>  cdns3-pci-y		 		:= cdns3-pci-wrap.o
>>> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
>>> index 20ae9e76940e..4012f1007da9 100644
>>> --- a/drivers/usb/cdns3/core.c
>>> +++ b/drivers/usb/cdns3/core.c
>>> @@ -309,6 +309,7 @@ static int cdns3_probe(struct platform_device *pdev)
>>>  	if (ret)
>>>  		goto err4;
>>>
>>> +	cdns3_debugfs_init(cdns);
>>>  	device_set_wakeup_capable(dev, true);
>>>  	pm_runtime_set_active(dev);
>>>  	pm_runtime_enable(dev);
>>> @@ -346,6 +347,7 @@ static int cdns3_remove(struct platform_device *pdev)
>>>  	pm_runtime_get_sync(&pdev->dev);
>>>  	pm_runtime_disable(&pdev->dev);
>>>  	pm_runtime_put_noidle(&pdev->dev);
>>> +	cdns3_debugfs_exit(cdns);
>>>  	cdns3_remove_roles(cdns);
>>>  	usb_phy_shutdown(cdns->usbphy);
>>>
>>> diff --git a/drivers/usb/cdns3/debugfs.c b/drivers/usb/cdns3/debugfs.c
>>> new file mode 100644
>>> index 000000000000..d4871bc1a69d
>>> --- /dev/null
>>> +++ b/drivers/usb/cdns3/debugfs.c
>>> @@ -0,0 +1,94 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Cadence USBSS DRD Controller DebugFS filer.
>>> + *
>>> + * Copyright (C) 2018 Cadence.
>>> + *
>>> + * Author: Pawel Laszczak <pawell@cadence.com>
>>> + */
>>> +
>>> +#include <linux/types.h>
>>> +#include <linux/debugfs.h>
>>> +#include <linux/seq_file.h>
>>> +#include <linux/uaccess.h>
>>> +
>>> +#include "core.h"
>>> +#include "gadget.h"
>>> +
>>> +static int cdns3_mode_show(struct seq_file *s, void *unused)
>>> +{
>>> +	struct cdns3		*cdns = s->private;
>>> +
>>> +	switch (cdns->role) {
>>> +	case CDNS3_ROLE_HOST:
>>> +		seq_puts(s, "host\n");
>>> +		break;
>>> +	case CDNS3_ROLE_GADGET:
>>> +		seq_puts(s, "device\n");
>>> +		break;
>>> +	case CDNS3_ROLE_OTG:
>>> +	case CDNS3_ROLE_END:
>>> +		seq_puts(s, "otg\n");
>>> +		break;
>>> +	default:
>>> +		seq_puts(s, "UNKNOWN mode\n");
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int cdns3_mode_open(struct inode *inode, struct file *file)
>>> +{
>>> +	return single_open(file, cdns3_mode_show, inode->i_private);
>>> +}
>>> +
>>> +static ssize_t cdns3_mode_write(struct file *file,
>>> +				const char __user *ubuf,
>>> +				size_t count, loff_t *ppos)
>>> +{
>>> +	struct seq_file		*s = file->private_data;
>>> +	struct cdns3		*cdns = s->private;
>>> +	u32			mode = 0;
>>> +	char			buf[32];
>>> +
>>> +	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
>>> +		return -EFAULT;
>>> +
>>> +	if (!strncmp(buf, "host", 4))
>>> +		mode = USB_DR_MODE_HOST;
>>> +
>>> +	if (!strncmp(buf, "device", 6))
>>> +		mode = USB_DR_MODE_PERIPHERAL;
>>> +
>>> +	if (!strncmp(buf, "otg", 3))
>>> +		mode = USB_DR_MODE_OTG;
>>> +
>>> +	cdns->desired_role = mode;
>>> +	queue_work(system_freezable_wq, &cdns->role_switch_wq);
>>
>> If we start with OTG mode and user says change mode to device will we still
>> switch to host based on ID pin change?
>>
>> If it does then this isn't working correctly.
>> We need to stop processing ID interrupts and keep the role static till
>> the user switches it back to otg.
> 
> Switching role form user space will limited driver only to selected mode. 
> Only for USB_DR_MODE_OTG driver should base on ID pin. 
> That's my intension.
> 

User space setting should override ID if it was OTG mode. At least this is how
it is for dwc3. That way it is useful for testing role swap.

cheers,
-roger

>>> +	return count;
>>> +}
>>> +
>>> +static const struct file_operations cdns3_mode_fops = {
>>> +	.open			= cdns3_mode_open,
>>> +	.write			= cdns3_mode_write,
>>> +	.read			= seq_read,
>>> +	.llseek			= seq_lseek,
>>> +	.release		= single_release,
>>> +};
>>> +
>>> +void cdns3_debugfs_init(struct cdns3 *cdns)
>>> +{
>>> +	struct dentry *root;
>>> +
>>> +	root = debugfs_create_dir(dev_name(cdns->dev), NULL);
>>> +	cdns->root = root;
>>> +	if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET) &&
>>> +	    IS_ENABLED(CONFIG_USB_CDNS3_HOST))
>>> +		debugfs_create_file("mode", 0644, root, cdns,
>>> +				    &cdns3_mode_fops);
>>> +}
>>> +
>>> +void cdns3_debugfs_exit(struct cdns3 *cdns)
>>> +{
>>> +	debugfs_remove_recursive(cdns->root);
>>> +}
>>> diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
>>> index 85731f3b693c..5344290c76f2 100644
>>> --- a/drivers/usb/cdns3/drd.h
>>> +++ b/drivers/usb/cdns3/drd.h
>>> @@ -119,4 +119,7 @@ int cdns3_drd_probe(struct cdns3 *cdns);
>>>  void cdns3_set_hw_mode(struct cdns3 *cdns, u32 mode);
>>>  irqreturn_t cdns3_drd_irq(struct cdns3 *cdns);
>>>
>>> +void cdns3_debugfs_init(struct cdns3 *cdns);
>>> +void cdns3_debugfs_exit(struct cdns3 *cdns);
>>> +
>>>  #endif /* __LINUX_CDNS3_DRD */
>>>
>>
>> cheers,
>> -roger
>> --
>> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> 
> Thanks,
> Cheers,
> Pawel
> 

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

      reply	other threads:[~2018-11-08 14:23 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-03 17:51 [RFC PATCH v1 00/14] Introduced new Cadence USBSS DRD Driver Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 01/14] usb:cdns3: add pci to platform driver wrapper Pawel Laszczak
2018-11-06 13:48   ` Roger Quadros
2018-11-07  8:42     ` Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 02/14] usb:cdns3: Device side header file Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 03/14] usb:cdns3: Driver initialization code Pawel Laszczak
2018-11-06 14:18   ` Roger Quadros
2018-11-07 13:14     ` Pawel Laszczak
2018-11-06 14:44   ` Roger Quadros
2018-11-08 11:38     ` Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 04/14] usb:cdns3: Added DRD support Pawel Laszczak
2018-11-06 14:32   ` Roger Quadros
2018-11-08 11:33     ` Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 05/14] usb:cdns3: Added Wrapper to XCHI driver Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 06/14] usb:cdns3: Initialization code for Device side Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 07/14] usb:cdns3: Implements device operations part of the API Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 08/14] usb:cdns3: EpX " Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 09/14] usb:cdns3: Ep0 " Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 10/14] usb:cdns3: Implements ISR functionality Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 11/14] usb:cdns3: Adds enumeration related function Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 12/14] usb:cdns3: Adds transfer " Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 13/14] usb:cdns3: Adds debugging function Pawel Laszczak
2018-11-03 19:14   ` Joe Perches
2018-11-05  6:17     ` Pawel Laszczak
2018-11-08  9:34   ` Roger Quadros
2018-11-08 12:03     ` Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 14/14] usb:cdns3: Feature for changing role Pawel Laszczak
2018-11-06 14:51   ` Roger Quadros
2018-11-08 11:51     ` Pawel Laszczak
2018-11-08 14:22       ` Roger Quadros [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5BE446C0.6080706@ti.com \
    --to=rogerq@ti.com \
    --cc=adouglas@cadence.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jbergsagel@ti.com \
    --cc=kurahul@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=pawell@cadence.com \
    --cc=peter.chen@nxp.com \
    --cc=pjez@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).