Re: [PATCH 2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support

[Roger Quadros <rogerq@ti.com>]

Hi Vignesh,

On 06/12/18 12:32, Vignesh R wrote:
> Hi Roger,
> 
> On 05/12/18 8:49 PM, Roger Quadros wrote:
>> The AM654 SoC from TI contains a DWC3 controller. Add
>> support for it.
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>  Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
>> index f96e09f..fa29ff8 100644
>> --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
>> +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
>> @@ -3,7 +3,7 @@ TI Keystone Soc USB Controller
>>  DWC3 GLUE
>>  
>>  Required properties:
>> - - compatible: should be "ti,keystone-dwc3".
>> + - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3".
> 
> Convention is to have one compatible per line:
>  compatible: Should be
> 	"ti,am654-dwc3" for AM654 SoCs
> 	"ti,keystone-dwc3" for K2 SoCs
> 

OK. Will fix it up. Thanks.

cheers,
-roger

> 
> 
>>   - #address-cells, #size-cells : should be '1' if the device has sub-nodes
>>     with 'reg' property.
>>   - reg : Address and length of the register set for the USB subsystem on
>> @@ -21,7 +21,7 @@ SoCs only:
>>  - clock-names:		Must be "usb".
>>  
>>  
>> -The following are mandatory properties for Keystone 2 66AK2G SoCs only:
>> +The following are mandatory properties for 66AK2G and AM654:
>>  
>>  - power-domains:	Should contain a phandle to a PM domain provider node
>>  			and an args specifier containing the USB device id
>>
> 

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki