From: jerome lacoste <jerome.lacoste@gmail.com>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Marie-Helene Lacoste <manies@tele2.fr>
Subject: 2.6.12.3 clock drifting twice too fast (amd64)
Date: Tue, 16 Aug 2005 12:10:54 +0200 [thread overview]
Message-ID: <5a2cf1f6050816031011590972@mail.gmail.com> (raw)
Installed stock 2.6.12.3 on a brand new amd64 box with an Asus extreme
AX 300 SE/t mainboard.
I remember seeing a message in the boot saying something along:
"cannot connect to hardware clock."
And now I see that the time is changing too fast (about 2 seconds each second).
I don't have visual on the boot sequence anymore (only remote access).
Kernel earlier than 2.6.11 won't boot on the box (SATA chipset unsupported).
Some info below (probably irrelevant).
What should I try?
Linux manies 2.6.12.3 #1 Thu Jul 28 12:49:15 CEST 2005 x86_64 GNU/Linux
jerome@manies:~$ lspci
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5951
0000:00:02.0 PCI bridge: ATI Technologies Inc: Unknown device 5a34
0000:00:11.0 RAID bus controller: ATI Technologies Inc: Unknown device 437a
0000:00:12.0 RAID bus controller: ATI Technologies Inc: Unknown device 4379
0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374
0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375
0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373
0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 04)
0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376
0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377
0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc:
Unknown device 4370
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown
device 5b60
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
0000:02:05.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
0000:02:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
0000:02:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
jerome@manies:~$ cat /proc/interrupts
CPU0
0: 22456064 IO-APIC-edge timer
1: 6175 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
8: 0 IO-APIC-edge rtc
12: 241004 IO-APIC-edge i8042
14: 201574 IO-APIC-edge ide0
16: 23 IO-APIC-level bttv0
17: 370224 IO-APIC-level ATI IXP
19: 33 IO-APIC-level ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3
20: 221385 IO-APIC-level eth0
21: 0 IO-APIC-level acpi
22: 65322 IO-APIC-level libata
23: 0 IO-APIC-level libata
NMI: 9788
LOC: 11226651
ERR: 18
next reply other threads:[~2005-08-16 10:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-16 10:10 jerome lacoste [this message]
2005-08-16 18:05 ` 2.6.12.3 clock drifting twice too fast (amd64) Christoph Lameter
2005-08-16 21:15 ` jerome lacoste
2005-08-16 23:17 ` Jeff Mahoney
2005-08-17 6:48 ` yhlu
2005-08-17 13:20 ` Jeff Mahoney
2005-08-17 15:11 ` yhlu
2005-08-16 21:41 ` john stultz
2005-08-16 23:11 ` jerome lacoste
2006-02-06 17:02 ` jerome lacoste
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5a2cf1f6050816031011590972@mail.gmail.com \
--to=jerome.lacoste@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=manies@tele2.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox