Re: [PATCH] remoteproc: qcom: q6v5: Add interconnect path proxy vote

[Georgi Djakov <djakov@kernel.org>]

On 25.02.22 5:32, Bjorn Andersson wrote:
> Many remoteproc instances requires that Linux casts a proxy vote for an
> interconnect path during boot, until they can do it themselves. Add
> support for voting for a single path.
> 
> As this is a shared problem between both PAS and MSS drivers, the path
> is acquired and votes casted from the common helper code.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Sibi posted recently a patch to add interconnect votes from the modem driver,
> today I needed the same feature for one of the PAS remoteprocs. After
> essentially duplicating Sibi's patch I realized that it doesn't look too bad to
> put this in the common Q6V5 code.
> 
> The main difference is that this would be messy if we need to support multiple
> paths, so we probably would have to push it out to the individual drivers at
> that point.
> 
> Sibi's patch can be found here.
> https://lore.kernel.org/all/1644813252-12897-3-git-send-email-quic_sibis@quicinc.com/
> 
> 
> This makes the implementation pick up one path, relevant DT bindings would
> still need to be updated in order be allowed to this in the DeviceTree files.
> 
>   drivers/remoteproc/qcom_q6v5.c | 21 ++++++++++++++++++++-
>   drivers/remoteproc/qcom_q6v5.h |  3 +++
>   2 files changed, 23 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
> index 442a388f8102..5280ec9b5449 100644
> --- a/drivers/remoteproc/qcom_q6v5.c
> +++ b/drivers/remoteproc/qcom_q6v5.c
> @@ -8,6 +8,7 @@
>    */
>   #include <linux/kernel.h>
>   #include <linux/platform_device.h>
> +#include <linux/interconnect.h>
>   #include <linux/interrupt.h>
>   #include <linux/module.h>
>   #include <linux/soc/qcom/qcom_aoss.h>
> @@ -51,9 +52,17 @@ int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
>   {
>   	int ret;
>   
> +	ret = icc_set_bw(q6v5->path, 0, UINT_MAX);
> +	if (ret < 0) {
> +		dev_err(q6v5->dev, "failed to set bandwidth request\n");
> +		return ret;
> +	}
> +
>   	ret = q6v5_load_state_toggle(q6v5, true);
> -	if (ret)
> +	if (ret) {
> +		icc_set_bw(q6v5->path, 0, 0);
>   		return ret;
> +	}
>   
>   	reinit_completion(&q6v5->start_done);
>   	reinit_completion(&q6v5->stop_done);
> @@ -78,6 +87,9 @@ int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
>   	disable_irq(q6v5->handover_irq);
>   	q6v5_load_state_toggle(q6v5, false);
>   
> +	/* Disable interconnect vote, in case handover never happened */
> +	icc_set_bw(q6v5->path, 0, 0);
> +
>   	return !q6v5->handover_issued;
>   }
>   EXPORT_SYMBOL_GPL(qcom_q6v5_unprepare);
> @@ -160,6 +172,8 @@ static irqreturn_t q6v5_handover_interrupt(int irq, void *data)
>   	if (q6v5->handover)
>   		q6v5->handover(q6v5);
>   
> +	icc_set_bw(q6v5->path, 0, 0);
> +
>   	q6v5->handover_issued = true;
>   
>   	return IRQ_HANDLED;
> @@ -332,6 +346,11 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>   		return load_state ? -ENOMEM : -EINVAL;
>   	}
>   
> +	q6v5->path = devm_of_icc_get(&pdev->dev, NULL);
> +	if (IS_ERR(q6v5->path))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(q6v5->path),
> +				     "failed to acquire interconnect path\n");
> +
>   	return 0;
>   }
>   EXPORT_SYMBOL_GPL(qcom_q6v5_init);

Probably we should also call icc_put(q6v5->path) in qcom_q6v5_deinit().

Reviewed-by: Georgi Djakov <djakov@kernel.org>

Thanks,
Georgi