From: Hans de Goede <hdegoede@redhat.com>
To: Armin Wolf <W_Armin@gmx.de>, coproscefalo@gmail.com
Cc: lkml@vorpal.se, kmal@cock.li, ilpo.jarvinen@linux.intel.com,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] platform/x86: toshiba_acpi: Fix quickstart quirk handling
Date: Tue, 2 Jul 2024 12:52:26 +0200 [thread overview]
Message-ID: <60260bb8-ba94-4bd7-8aed-c3bf5b8f4a14@redhat.com> (raw)
In-Reply-To: <20240701194539.348937-1-W_Armin@gmx.de>
Hi Armin,
On 7/1/24 9:45 PM, Armin Wolf wrote:
> The global hci_hotkey_quickstart quirk flag is tested in
> toshiba_acpi_enable_hotkeys() before the quirk flag is properly
> initialized based on SMBIOS data. This causes the quirk to be
> applied to all models, some of which behave erratically as a
> result.
>
> Fix this by initializing the global quirk flags during module
> initialization before registering the ACPI driver. This also
> allows us to mark toshiba_dmi_quirks[] as __initconst.
>
> Fixes: 23f1d8b47d12 ("platform/x86: toshiba_acpi: Add quirk for buttons on Z830")
> Reported-by: kemal <kmal@cock.li>
> Tested-by: kemal <kmal@cock.li>
> Signed-off-by: Armin Wolf <W_Armin@gmx.de>
> ---
> Changes since v1:
> - add Tested-by tag
Thank you for fixing this, the patch looks good to me:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
I was hoping my pdx86 fixes pull-request last Saturday would
be the last one for this cycle, but I'll prep another one
with this patch sometime this week:
Thank you for your patch/series, I've applied this patch
(series) to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
I have added a:
Closes: https://lore.kernel.org/platform-driver-x86/R4CYFS.TWB8QUU2SHWI1@cock.li/
tag whole applying this.
I will include this patch in my next fixes pull-req to Linus
for the current kernel development cycle.
Regards,
Hans
Regards,
Hans
> ---
> drivers/platform/x86/toshiba_acpi.c | 31 +++++++++++++++++------------
> 1 file changed, 18 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
> index 3a8d8df89186..10d0ce6c8342 100644
> --- a/drivers/platform/x86/toshiba_acpi.c
> +++ b/drivers/platform/x86/toshiba_acpi.c
> @@ -3271,7 +3271,7 @@ static const char *find_hci_method(acpi_handle handle)
> */
> #define QUIRK_HCI_HOTKEY_QUICKSTART BIT(1)
>
> -static const struct dmi_system_id toshiba_dmi_quirks[] = {
> +static const struct dmi_system_id toshiba_dmi_quirks[] __initconst = {
> {
> /* Toshiba Portégé R700 */
> /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
> @@ -3306,8 +3306,6 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
> struct toshiba_acpi_dev *dev;
> const char *hci_method;
> u32 dummy;
> - const struct dmi_system_id *dmi_id;
> - long quirks = 0;
> int ret = 0;
>
> if (toshiba_acpi)
> @@ -3460,16 +3458,6 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
> }
> #endif
>
> - dmi_id = dmi_first_match(toshiba_dmi_quirks);
> - if (dmi_id)
> - quirks = (long)dmi_id->driver_data;
> -
> - if (turn_on_panel_on_resume == -1)
> - turn_on_panel_on_resume = !!(quirks & QUIRK_TURN_ON_PANEL_ON_RESUME);
> -
> - if (hci_hotkey_quickstart == -1)
> - hci_hotkey_quickstart = !!(quirks & QUIRK_HCI_HOTKEY_QUICKSTART);
> -
> toshiba_wwan_available(dev);
> if (dev->wwan_supported)
> toshiba_acpi_setup_wwan_rfkill(dev);
> @@ -3618,10 +3606,27 @@ static struct acpi_driver toshiba_acpi_driver = {
> .drv.pm = &toshiba_acpi_pm,
> };
>
> +static void __init toshiba_dmi_init(void)
> +{
> + const struct dmi_system_id *dmi_id;
> + long quirks = 0;
> +
> + dmi_id = dmi_first_match(toshiba_dmi_quirks);
> + if (dmi_id)
> + quirks = (long)dmi_id->driver_data;
> +
> + if (turn_on_panel_on_resume == -1)
> + turn_on_panel_on_resume = !!(quirks & QUIRK_TURN_ON_PANEL_ON_RESUME);
> +
> + if (hci_hotkey_quickstart == -1)
> + hci_hotkey_quickstart = !!(quirks & QUIRK_HCI_HOTKEY_QUICKSTART);
> +}
> +
> static int __init toshiba_acpi_init(void)
> {
> int ret;
>
> + toshiba_dmi_init();
> toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir);
> if (!toshiba_proc_dir) {
> pr_err("Unable to create proc dir " PROC_TOSHIBA "\n");
> --
> 2.39.2
>
next prev parent reply other threads:[~2024-07-02 10:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-01 19:45 [PATCH v2] platform/x86: toshiba_acpi: Fix quickstart quirk handling Armin Wolf
2024-07-02 10:52 ` Hans de Goede [this message]
2024-07-02 11:13 ` Armin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=60260bb8-ba94-4bd7-8aed-c3bf5b8f4a14@redhat.com \
--to=hdegoede@redhat.com \
--cc=W_Armin@gmx.de \
--cc=coproscefalo@gmail.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=kmal@cock.li \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@vorpal.se \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox