rtlwifi-new v0.6 and dkms failures

["David R. Bergstein" <david.r.bergstein@gmail.com>]

Larry,

Thanks for your prior assistance with the rtw88 module.  Since manually
compiling and installing works correctly, I have been working to
register the software in dkms, but am running into some difficulties. 
Below are some snippets from a terminal session to illustrate the issue:

udo dkms install rtlwifi-new/0.6

Creating symlink /var/lib/dkms/rtlwifi-new/0.6/source ->
                 /usr/src/rtlwifi-new-0.6

DKMS: add completed.

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area....(bad exit status: 2)
make -j12 KERNELRELEASE=5.0.0-11-lowlatency -C
/lib/modules/5.0.0-11-lowlatency/build
M=/var/lib/dkms/rtlwifi-new/0.6/build....
ERROR (dkms apport): binary package for rtlwifi-new: 0.6 not found
Error!  Build of rtl_pci.ko failed for: 5.0.0-11-lowlatency (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/rtlwifi-new/0.6/build/ for more information.

Below is the make.log contents referenced above:

DKMS make.log for rtlwifi-new-0.6 for kernel 5.0.0-11-lowlatency (x86_64)
Sun 14 Apr 2019 05:25:37 PM EDT
make: Entering directory '/usr/src/linux-headers-5.0.0-11-lowlatency'
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/main.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/mac80211.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/util.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/debug.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/tx.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rx.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/mac.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/phy.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/efuse.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/fw.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/ps.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/sec.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/regd.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rtw8822b.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rtw8822b_table.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rtw8822c.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rtw8822c_table.o
  CC [M]  /var/lib/dkms/rtlwifi-new/0.6/build/pci.o
  LD [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rtwpci.o
  LD [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rtw88.o
  Building modules, stage 2.
  MODPOST 2 modules
  CC      /var/lib/dkms/rtlwifi-new/0.6/build/rtw88.mod.o
  CC      /var/lib/dkms/rtlwifi-new/0.6/build/rtwpci.mod.o
  LD [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rtw88.ko
  LD [M]  /var/lib/dkms/rtlwifi-new/0.6/build/rtwpci.ko
make: Leaving directory '/usr/src/linux-headers-5.0.0-11-lowlatency'

As you can see, the make log does not show any errors, which is baffling
to me.  Any insight you have on resolving this issue would be appreciated.

Sincerely,

David R. Bergstein