RE: [PATCH 1/3] iommu: Add Visconti5 IOMMU driver

nobuhiro1.iwamatsu
2022-06-20T05:50:15Z

Hi,

Thanks for your review.

> -----Original Message-----
> From: Jason Gunthorpe <jgg@nvidia.com>
> Sent: Thursday, May 26, 2022 3:27 AM
> To: Baolu Lu <baolu.lu@linux.intel.com>
> Cc: iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Joerg Roedel <joro@8bytes.org>; Will
> Deacon <will@kernel.org>; Rob Herring <robh+dt@kernel.org>;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> iommu@lists.linux-foundation.org; ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴ
> Ｃ○ＥＡ開) <yuji2.ishikawa@toshiba.co.jp>;
> linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH 1/3] iommu: Add Visconti5 IOMMU driver
>
> On Wed, May 25, 2022 at 02:26:37PM +0800, Baolu Lu wrote:
> > On 2022/5/25 09:31, Nobuhiro Iwamatsu wrote:
> > > +static const struct iommu_ops visconti_atu_ops = {
> > > + .domain_alloc = visconti_atu_domain_alloc,
> > > + .probe_device = visconti_atu_probe_device,
> > > + .release_device = visconti_atu_release_device,
> > > + .device_group = generic_device_group,
> > > + .of_xlate = visconti_atu_of_xlate,
> > > + .pgsize_bitmap = ATU_IOMMU_PGSIZE_BITMAP,
> > > + .default_domain_ops = &(const struct iommu_domain_ops) {
> > > + .attach_dev = visconti_atu_attach_device,
> > > + .detach_dev = visconti_atu_detach_device,
> >
> > The detach_dev callback is about to be deprecated. The new drivers
> > should implement the default domain and blocking domain instead.
>
> Yes please, new drivers need to use default_domains.
>
> It is very strange that visconti_atu_detach_device() does nothing. It is not
> required that a domain is fully unmapped before being destructed, I think
> detach should set ATU_AT_EN to 0.

I see, I rethink implementation.

>
> What behavior does the HW have when ATU_AT_ENTRY_EN == 0? If DMA is
> rejected then this driver should have a IOMMU_DOMAIN_BLOCKING and
> return that from ops->def_domain_type().

If ATU_AT_ENTRY_EN is 0, nothing happens. It does not work with IOMMU,
it works with the memory space set in device tree.
Also, I investigate about IOMMU_DOMAIN_BLOCKING.

>
> Attaching a the blocking domain should set ATU_AT_ENTRY_EN = 0
>
> Also, if I surmise how this works properly, it is not following the iommu API to
> halt all DMA during map/unmap operations. Should at least document this and
> explain why it is OK..

I see, I will check DMA during map and unmap operations.

>
> I'm feeling like these "special" drivers need some kind of handshake with their
> only users because they don't work with things like VFIO..

Since the devices that utilize this IOMMU function are fixed, I do not think that a special handshake is required.
Could you you tell me where you thought you needed a handshake?

Best regards,
Nobuhiro

>
> Jason