public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: Frank Wang <frank.wang@rock-chips.com>
Cc: dianders@chromium.org, kishon@ti.com, robh+dt@kernel.org,
	pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-usb@vger.kernel.org, kever.yang@rock-chips.com,
	huangtao@rock-chips.com, william.wu@rock-chips.com,
	frank.wang@rock-chips.com.org
Subject: Re: [PATCH 1/2] Documentation: bindings: add DT documentation for Rockchip USB2PHY
Date: Tue, 31 May 2016 11:02:12 +0200	[thread overview]
Message-ID: <6548390.RQDBBuPzBf@diego> (raw)
In-Reply-To: <1464676811-7418-2-git-send-email-frank.wang@rock-chips.com>

Hi Frank,

Am Dienstag, 31. Mai 2016, 14:40:10 schrieb Frank Wang:
> Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
> ---
>  .../bindings/phy/phy-rockchip-inno-usb2.txt        |   48
> ++++++++++++++++++++ 1 file changed, 48 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> 
> diff --git
> a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt new file
> mode 100644
> index 0000000..4e537b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> @@ -0,0 +1,48 @@
> +ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
> +
> +Required properties (phy (parent) node):
> + - compatible: should contain:
> +	* "rockchip,rk3366-usb2phy"
> + - #clock-cells: should be 0.
> + - clock-names: specify the 480m output clk name.
> +
> +Optional properties:
> + - vbus_host-gpio: pull gpio high/low to control the host vbus power.

sorry for not catching that in our earlier talks, but I believe this should be 
a regulator instead. See for example vcc5_host1, vcc5v_otg in rk3288-veyron-
chromebook.dtsi .


> +Required nodes: a sub-node is required for each port the phy provides.
> +		The sub-node name is used to identify host or otg port.
> +
> +Required properties (port (child) node):
> + - #phy-cells: must be 0. See ./phy-bindings.txt for details.
> + - interrupts: irq number for host/otg port.

make that something like:
Specify an interrupt for each entry in interrupt-names.

> + - interrupt-names: interrupt name, in line with irq number.

make that something like:
Shall be "linestate" for the linestate interrupt.
---

You might want to add the bvalid and id interrupts for the otg phys as well 
already - would make handling legacy devicetree files easier. [= if they get 
specified later, the driver would always need to also handle devicetrees where 
they aren't specified].


Heiko

  reply	other threads:[~2016-05-31  9:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-31  6:40 [PATCH 0/2] Add a new Rockchip usb2 phy driver Frank Wang
2016-05-31  6:40 ` [PATCH 1/2] Documentation: bindings: add DT documentation for Rockchip USB2PHY Frank Wang
2016-05-31  9:02   ` Heiko Stübner [this message]
2016-06-01  8:09     ` Frank Wang
2016-06-01 22:17       ` Heiko Stübner
2016-06-02  2:53         ` Frank Wang
2016-06-01 22:02   ` Rob Herring
2016-05-31  6:40 ` [PATCH 2/2] phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy Frank Wang
2016-06-01 23:46   ` Heiko Stübner
2016-06-02  3:19     ` Frank Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6548390.RQDBBuPzBf@diego \
    --to=heiko@sntech.de \
    --cc=dianders@chromium.org \
    --cc=frank.wang@rock-chips.com \
    --cc=frank.wang@rock-chips.com.org \
    --cc=galak@codeaurora.org \
    --cc=huangtao@rock-chips.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kever.yang@rock-chips.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=william.wu@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox