From: Sricharan R <sricharan@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: robh@kernel.org, viresh.kumar@linaro.org, mark.rutland@arm.com,
mturquette@baylibre.com, sboyd@codeaurora.org,
linux@armlinux.org.uk, andy.gross@linaro.org,
david.brown@linaro.org, rjw@rjwysocki.net,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-pm@vger.kernel.org, linux@arm.linux.org.uk
Subject: Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
Date: Fri, 25 May 2018 11:10:11 +0530 [thread overview]
Message-ID: <664089d4-b30d-99bb-2021-12128b2895ba@codeaurora.org> (raw)
In-Reply-To: <20180524173926.GC14924@minitux>
Hi Bjorn,
On 5/24/2018 11:09 PM, Bjorn Andersson wrote:
> On Tue 06 Mar 06:38 PST 2018, Sricharan R wrote:
>
>> From: Stephen Boyd <sboyd@codeaurora.org>
>>
>> Krait CPUs have a handful of L2 cache controller registers that
>> live behind a cp15 based indirection register. First you program
>> the indirection register (l2cpselr) to point the L2 'window'
>> register (l2cpdr) at what you want to read/write. Then you
>> read/write the 'window' register to do what you want. The
>> l2cpselr register is not banked per-cpu so we must lock around
>> accesses to it to prevent other CPUs from re-pointing l2cpdr
>> underneath us.
>>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
>
> This should have your signed-off-by here as well.
>
ok.
> Apart from that:
>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>
Thanks.
Regards,
Sricharan
> Regards,
> Bjorn
>
>> ---
>> arch/arm/common/Kconfig | 3 ++
>> arch/arm/common/Makefile | 1 +
>> arch/arm/common/krait-l2-accessors.c | 48 +++++++++++++++++++++++++++++++
>> arch/arm/include/asm/krait-l2-accessors.h | 10 +++++++
>> 4 files changed, 62 insertions(+)
>> create mode 100644 arch/arm/common/krait-l2-accessors.c
>> create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
>>
>> diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
>> index e5ad070..c8e1986 100644
>> --- a/arch/arm/common/Kconfig
>> +++ b/arch/arm/common/Kconfig
>> @@ -7,6 +7,9 @@ config DMABOUNCE
>> bool
>> select ZONE_DMA
>>
>> +config KRAIT_L2_ACCESSORS
>> + bool
>> +
>> config SHARP_LOCOMO
>> bool
>>
>> diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
>> index 70b4a14..eec6cd1 100644
>> --- a/arch/arm/common/Makefile
>> +++ b/arch/arm/common/Makefile
>> @@ -7,6 +7,7 @@ obj-y += firmware.o
>>
>> obj-$(CONFIG_SA1111) += sa1111.o
>> obj-$(CONFIG_DMABOUNCE) += dmabounce.o
>> +obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
>> obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
>> obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
>> obj-$(CONFIG_SHARP_SCOOP) += scoop.o
>> diff --git a/arch/arm/common/krait-l2-accessors.c b/arch/arm/common/krait-l2-accessors.c
>> new file mode 100644
>> index 0000000..9a97dda
>> --- /dev/null
>> +++ b/arch/arm/common/krait-l2-accessors.c
>> @@ -0,0 +1,48 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
>> +
>> +#include <linux/spinlock.h>
>> +#include <linux/export.h>
>> +
>> +#include <asm/barrier.h>
>> +#include <asm/krait-l2-accessors.h>
>> +
>> +static DEFINE_RAW_SPINLOCK(krait_l2_lock);
>> +
>> +void krait_set_l2_indirect_reg(u32 addr, u32 val)
>> +{
>> + unsigned long flags;
>> +
>> + raw_spin_lock_irqsave(&krait_l2_lock, flags);
>> + /*
>> + * Select the L2 window by poking l2cpselr, then write to the window
>> + * via l2cpdr.
>> + */
>> + asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
>> + isb();
>> + asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
>> + isb();
>> +
>> + raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
>> +}
>> +EXPORT_SYMBOL(krait_set_l2_indirect_reg);
>> +
>> +u32 krait_get_l2_indirect_reg(u32 addr)
>> +{
>> + u32 val;
>> + unsigned long flags;
>> +
>> + raw_spin_lock_irqsave(&krait_l2_lock, flags);
>> + /*
>> + * Select the L2 window by poking l2cpselr, then read from the window
>> + * via l2cpdr.
>> + */
>> + asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
>> + isb();
>> + asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
>> +
>> + raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
>> +
>> + return val;
>> +}
>> +EXPORT_SYMBOL(krait_get_l2_indirect_reg);
>> diff --git a/arch/arm/include/asm/krait-l2-accessors.h b/arch/arm/include/asm/krait-l2-accessors.h
>> new file mode 100644
>> index 0000000..dd7c474
>> --- /dev/null
>> +++ b/arch/arm/include/asm/krait-l2-accessors.h
>> @@ -0,0 +1,10 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
>> +
>> +#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
>> +#define __ASMARM_KRAIT_L2_ACCESSORS_H
>> +
>> +extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
>> +extern u32 krait_get_l2_indirect_reg(u32 addr);
>> +
>> +#endif
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>>
--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2018-05-25 5:40 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-06 14:38 [PATCH v9 00/15] Krait clocks + Krait CPUfreq Sricharan R
2018-03-06 14:38 ` [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions Sricharan R
2018-05-24 17:39 ` Bjorn Andersson
2018-05-25 5:40 ` Sricharan R [this message]
2018-05-30 15:55 ` Stephen Boyd
2018-05-31 4:57 ` Sricharan R
2018-05-31 7:41 ` Stephen Boyd
2018-06-01 13:20 ` Sricharan R
2018-06-01 17:12 ` Stephen Boyd
2018-03-06 14:38 ` [PATCH v9 02/15] clk: mux: Split out register accessors for reuse Sricharan R
2018-05-24 16:50 ` Bjorn Andersson
2018-05-25 5:38 ` Sricharan R
2018-03-06 14:38 ` [PATCH v9 03/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2018-03-06 14:38 ` [PATCH v9 04/15] clk: qcom: Add HFPLL driver Sricharan R
2018-03-06 14:38 ` [PATCH v9 05/15] dt-bindings: clock: Document qcom,hfpll Sricharan R
2018-03-06 14:38 ` [PATCH v9 06/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs Sricharan R
2018-03-06 14:39 ` [PATCH v9 07/15] clk: qcom: Add IPQ806X's HFPLLs Sricharan R
2018-03-06 14:39 ` [PATCH v9 08/15] clk: qcom: Add support for Krait clocks Sricharan R
2018-03-06 14:39 ` [PATCH v9 09/15] clk: qcom: Add KPSS ACC/GCC driver Sricharan R
2018-03-06 14:39 ` [PATCH v9 10/15] dt-bindings: arm: Document qcom,kpss-gcc Sricharan R
2018-03-06 14:39 ` [PATCH v9 11/15] clk: qcom: Add Krait clock controller driver Sricharan R
2018-03-06 14:39 ` [PATCH v9 12/15] dt-bindings: clock: Document qcom,krait-cc Sricharan R
2018-03-06 14:39 ` [PATCH v9 13/15] clk: qcom: Add safe switch hook for krait mux clocks Sricharan R
2018-03-06 14:39 ` [PATCH v9 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Sricharan R
2018-03-07 5:09 ` Viresh Kumar
2018-03-06 14:39 ` [PATCH v9 15/15] dt-bindings: cpufreq: Document operating-points-v2-krait-cpu Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=664089d4-b30d-99bb-2021-12128b2895ba@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=rjw@rjwysocki.net \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox