Re: [PATCH] block: bio-integrity: fix potential null-ptr-deref in bio_integrity_free

["yebin (H)" <yebin10@huawei.com>]

On 2024/6/7 9:35, Ming Lei wrote:
> On Fri, Jun 07, 2024 at 09:32:29AM +0800, yebin wrote:
>>
>> On 2024/6/7 8:13, Ming Lei wrote:
>>> On Thu, Jun 06, 2024 at 02:26:55PM +0800, Ye Bin wrote:
>>>> From: Ye Bin <yebin10@huawei.com>
>>>>
>>>> There's a issue as follows when do format NVME with IO:
>>>> BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
>>>> PGD 101727f067 P4D 1011fae067 PUD fbed78067 PMD 0
>>>> Oops: 0000 [#1] SMP NOPTI
>>>> RIP: 0010:kfree+0x4f/0x160
>>>> RSP: 0018:ff705a800912b910 EFLAGS: 00010247
>>>> RAX: 0000000000000000 RBX: 0d06d30000000000 RCX: ff4fb320260ad990
>>>> RDX: ff4fb30ee7acba40 RSI: 0000000000000000 RDI: 00b04cff80000000
>>>> RBP: ff4fb30ee7acba40 R08: 0000000000000200 R09: ff705a800912bb60
>>>> R10: 0000000000000000 R11: ff4fb3103b67c750 R12: ffffffff9a62d566
>>>> R13: ff4fb30aa0530000 R14: 0000000000000000 R15: 000000000000000a
>>>> FS:  00007f4399b6b700(0000) GS:ff4fb31040140000(0000) knlGS:0000000000000000
>>>> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>> CR2: 0000000000000008 CR3: 0000001014cd4002 CR4: 0000000000761ee0
>>>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>> DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
>>>> PKRU: 55555554
>>>> Call Trace:
>>>>    bio_integrity_free+0xa6/0xb0
>>>>    __bio_integrity_endio+0x8c/0xa0
>>>>    bio_endio+0x2b/0x130
>>>>    blk_update_request+0x78/0x2b0
>>>>    blk_mq_end_request+0x1a/0x140
>>>>    blk_mq_try_issue_directly+0x5d/0xc0
>>>>    blk_mq_make_request+0x46b/0x540
>>>>    generic_make_request+0x121/0x300
>>>>    submit_bio+0x6c/0x140
>>>>    __blkdev_direct_IO_simple+0x1ca/0x3a0
>>>>    blkdev_direct_IO+0x3d9/0x460
>>>>    generic_file_read_iter+0xb4/0xc60
>>>>    new_sync_read+0x121/0x170
>>>>    vfs_read+0x89/0x130
>>>>    ksys_read+0x52/0xc0
>>>>    do_syscall_64+0x5d/0x1d0
>>>>    entry_SYSCALL_64_after_hwframe+0x65/0xca
>>>>
>>>> Assuming a 512 byte directIO is issued, the initial logical block size of
>>>> the state block device is 512 bytes, and then modified to 4096 bytes.
>>>> Above issue may happen as follows:
>>>>            Direct read                    format NVME
>>>> __blkdev_direct_IO_simple(iocb, iter, nr_pages);
>>>>     if ((pos | iov_iter_alignment(iter)) & (bdev_logical_block_size(bdev) - 1))
>>>> 	-->The logical block size is 512, and the IO issued is 512 bytes,
>>>> 	   which can be checked
>>>>       return -EINVAL;
>>>>     submit_bio(&bio);
>>>>                                         nvme_dev_ioctl
>>>>                                           case NVME_IOCTL_RESCAN:
>>>>                                             nvme_queue_scan(ctrl);
>>>>                                                ...
>>>>                                               nvme_update_disk_info(disk, ns, id);
>>>>                                                 blk_queue_logical_block_size(disk->queue, bs);
>>>>                                                   --> 512->4096
>>>>        blk_queue_enter(q, flags)
>>>>        blk_mq_make_request(q, bio)
>>>>          bio_integrity_prep(bio)
>>>> 	 len = bio_integrity_bytes(bi, bio_sectors(bio));
>>>> 	   -->At this point, because the logical block size has increased to
>>>> 	      4096 bytes, the calculated 'len' here is 0
>>>>            buf = kmalloc(len, GFP_NOIO | q->bounce_gfp);
>>>> 	   -->Passed in len=0 and returned buf=16
>>>>            end = (((unsigned long) buf) + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
>>>>            start = ((unsigned long) buf) >> PAGE_SHIFT;
>>>>            nr_pages = end - start;  -->nr_pages == 1
>>>>            bip->bip_flags |= BIP_BLOCK_INTEGRITY;
>>>>            for (i = 0 ; i < nr_pages ; i++) {
>>>>              if (len <= 0)
>>>>                 -->Not initializing the bip_vec of bio_integrity, will result
>>>> 		 in null pointer access during subsequent releases. Even if
>>>> 		 initialized, it will still cause subsequent releases access
>>>> 		 null pointer because the buffer address is incorrect.
>>>>                break;
>>>>
>>>> Firstly, it is unreasonable to format NVME in the presence of IO. It is also
>>>> possible to see IO smaller than the logical block size in the block layer for
>>>> this type of concurrency. It is expected that this type of IO device will
>>>> return an error, so exception handling should also be done for this type of
>>>> IO to prevent null pointer access from causing system crashes.
>>> Actually unaligned IO handling is one mess for nvme hardware. Yes, IO may fail,
>>> but it is observed that meta buffer is overwrite by DMA in read IO.
>>>
>>> Ye and Yi, can you test the following patch in your 'nvme format' & IO workload?
>>>
>>>
>>> diff --git a/block/blk-core.c b/block/blk-core.c
>>> index 82c3ae22d76d..a41ab4a3a398 100644
>>> --- a/block/blk-core.c
>>> +++ b/block/blk-core.c
>>> @@ -336,6 +336,19 @@ int blk_queue_enter(struct request_queue *q, blk_mq_req_flags_t flags)
>>>    	return 0;
>>>    }
>>> +static bool bio_unaligned(struct bio *bio)
>>> +{
>>> +	unsigned int bs = bdev_logical_block_size(bio->bi_bdev);
>>> +
>>> +	if (bio->bi_iter.bi_size & (bs - 1))
>>> +	        return true;
>>> +
>>> +	if ((bio->bi_iter.bi_sector << SECTOR_SHIFT) & (bs - 1))
>>> +	        return true;
>>> +
>>> +	return false;
>>> +}
>> I think this judgment is a bit incorrect. It should not be sufficient to
>> only determine whether
>> the length and starting sector are logically block aligned.
> Can you explain why the two are not enough? Other limits should be handled
> by bio split.
If logical block size is 512 bytes, BIO has 4 segments, each segment 
length is 512 bytes,
bio->bi_iter.bi_sector == 0. If logical block size change to 4096 
bytes,  bio_unaligned() will
return false.
I'm not sure if the example I gave is appropriate?
>
> Thanks,
> Ming
>
> .
>