From: "Winkler, Tomas" <tomas.winkler@intel.com>
To: "Gustavo A. R. Silva" <gustavo@embeddedor.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Usyskin, Alexander" <alexander.usyskin@intel.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Gustavo A . R . Silva" <gustavoars@kernel.org>
Subject: RE: [char-misc-next] Revert "mei: hdcp: Replace one-element array with flexible-array member"
Date: Tue, 28 Jul 2020 22:29:39 +0000 [thread overview]
Message-ID: <6736aefa05e84b30bcc91003b55c7644@intel.com> (raw)
In-Reply-To: <398e20e8c3f7436bb50d671b9aa9f809@intel.com>
> > >>
> > >> Hi Tomas,
> > >>
> > >> On 7/28/20 16:41, Tomas Winkler wrote:
> > >>> Greg please revert, this commit it changes size of struct
> > >>> wired_cmd_repeater_auth_stream_req_in, this is not what firmware
> > >>> is expecting.
> > >>
> > >> Could you elaborate on what's the firmware expecting, exactly?
> > > struct wired_cmd_repeater_auth_stream_req_in {
> > > - struct hdcp2_streamid_type streams[1];
> > > + struct hdcp2_streamid_type streams[];
> > > }
> > >
> > > But then you have, which you haven't changed to + 1 byte =
> > > mei_cldev_send(cldev, (u8 *)&verify_mprime_in,
> > > sizeof(verify_mprime_in));
> > >
> >
> > I see, this is the kind of feedback I need from people that knows the
> > code better. Thanks!
> >
> > > But that's not the major point. Point is that we should be able to
> > > review and test the code before it is merged. You haven't run it, right?
> > > There is MAINTAINERS file for a reason.
> > >
> >
> > I'm using this command:
> >
> > $ scripts/get_maintainer.pl --nokeywords --nogit --nogit-fallback
> >
> > and this is the output for both files:
> >
> > $ scripts/get_maintainer.pl --nokeywords --nogit --nogit-fallback
> > drivers/misc/mei/hdcp/mei_hdcp.c Arnd Bergmann <arnd@arndb.de>
> > (supporter:CHAR and MISC DRIVERS) Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> (supporter:CHAR and MISC DRIVERS) linux-
> > kernel@vger.kernel.org (open list) $ scripts/get_maintainer.pl
> > --nokeywords -- nogit --nogit-fallback
> > drivers/misc/mei/hdcp/mei_hdcp.h Arnd Bergmann <arnd@arndb.de>
> > (supporter:CHAR and MISC DRIVERS) Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> (supporter:CHAR and MISC DRIVERS) linux-
> > kernel@vger.kernel.org (open list)
>
>
> > For some reason you don't appear on the list above. Do you see
> > anything wrong with the command I'm running to get the maintainers and
> lists?
>
> Not sure, it should be caught by drivers/misc/mei/* ?
> Maybe it is not recursive? Need to check the script, frankly I usually check this
> manually.
>
> INTEL MANAGEMENT ENGINE (mei)
> M: Tomas Winkler <tomas.winkler@intel.com>
> L: linux-kernel@vger.kernel.org
> S: Supported
> F: Documentation/driver-api/mei/*
> F: drivers/misc/mei/*
> F: drivers/watchdog/mei_wdt.c
> F: include/linux/mei_cl_bus.h
> F: include/uapi/linux/mei.h
> F: samples/mei/*
>
It's not recursive, when I add drivers/misc/mei/hdcp/* . It works correctly
I will post a patch.
Thanks
Tomas
>
> >
> > Thanks
> > --
> > Gustavo
> >
> > >>
> > >>> I really do not appreciate that the code is bypassing driver
> > >>> maintaner review, I think this is a minimum we can ask for, this
> > >>> is not for a first time.
> > >>>
> > >>> This reverts commit c56967d674e361ebe716e66992e3c5332b25ac1f.
> > >>>
> > >>> Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
> > >>> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> > >>> ---
> > >>> drivers/misc/mei/hdcp/mei_hdcp.c | 2 +-
> > >>> drivers/misc/mei/hdcp/mei_hdcp.h | 2 +-
> > >>> 2 files changed, 2 insertions(+), 2 deletions(-)
> > >>>
> > >>> diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
> > >>> b/drivers/misc/mei/hdcp/mei_hdcp.c
> > >>> index d1d3e025ca0e..e6c3dc595617 100644
> > >>> --- a/drivers/misc/mei/hdcp/mei_hdcp.c
> > >>> +++ b/drivers/misc/mei/hdcp/mei_hdcp.c
> > >>> @@ -572,7 +572,7 @@ static int mei_hdcp_verify_mprime(struct
> > >>> device
> > >> *dev,
> > >>> HDCP_2_2_MPRIME_LEN);
> > >>> drm_hdcp_cpu_to_be24(verify_mprime_in.seq_num_m, data-
> > seq_num_m);
> > >>> memcpy(verify_mprime_in.streams, data->streams,
> > >>> - array_size(data->k, sizeof(*data->streams)));
> > >>> + (data->k * sizeof(struct hdcp2_streamid_type)));
> > >>>
> > >>> verify_mprime_in.k = cpu_to_be16(data->k);
> > >>>
> > >>> diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h
> > >>> b/drivers/misc/mei/hdcp/mei_hdcp.h
> > >>> index 834757f5e072..18ffc773fa18 100644
> > >>> --- a/drivers/misc/mei/hdcp/mei_hdcp.h
> > >>> +++ b/drivers/misc/mei/hdcp/mei_hdcp.h
> > >>> @@ -358,7 +358,7 @@ struct
> wired_cmd_repeater_auth_stream_req_in
> > {
> > >>> u8
> > >> seq_num_m[HDCP_2_2_SEQ_NUM_LEN];
> > >>> u8 m_prime[HDCP_2_2_MPRIME_LEN];
> > >>> __be16 k;
> > >>> - struct hdcp2_streamid_type streams[];
> > >>> + struct hdcp2_streamid_type streams[1];
> > >>> } __packed;
> > >>>
> > >>> struct wired_cmd_repeater_auth_stream_req_out {
> > >>>
next prev parent reply other threads:[~2020-07-28 22:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-28 21:41 [char-misc-next] Revert "mei: hdcp: Replace one-element array with flexible-array member" Tomas Winkler
2020-07-28 21:56 ` Gustavo A. R. Silva
2020-07-28 22:01 ` Winkler, Tomas
2020-07-28 22:14 ` Gustavo A. R. Silva
2020-07-28 22:14 ` Winkler, Tomas
2020-07-28 22:29 ` Winkler, Tomas [this message]
2020-07-28 23:04 ` Gustavo A. R. Silva
2020-07-28 23:07 ` Winkler, Tomas
2020-07-28 23:16 ` Gustavo A. R. Silva
2020-07-29 3:57 ` Gustavo A. R. Silva
2020-07-28 23:06 ` Joe Perches
2020-07-28 23:08 ` Winkler, Tomas
2020-07-28 22:17 ` Gustavo A. R. Silva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6736aefa05e84b30bcc91003b55c7644@intel.com \
--to=tomas.winkler@intel.com \
--cc=alexander.usyskin@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=gustavo@embeddedor.com \
--cc=gustavoars@kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox