From: MyungJoo Ham <myungjoo.ham@samsung.com>
To: Guenter Roeck <linux@roeck-us.net>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: 최찬우 <cw00.choi@samsung.com>
Subject: Re: [PATCH] extcon: gpio: Request gpio pin before modifying its state
Date: Mon, 25 Nov 2013 02:37:13 +0000 (GMT) [thread overview]
Message-ID: <6748233.22261385347032615.JavaMail.weblogic@epv6ml03> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=euc-kr, Size: 1986 bytes --]
> Commit 338de0ca (extcon: gpio: Use gpio driver/chip debounce if supported)
> introduced a call to gpio_set_debounce() before actually requesting the
> respective gpio pin from the gpio subsystem.
>
> The gpio subsystem expects that a gpio pin was requested before modifying its
> state. Not doing so results in a warning from gpiolib, and the gpio pin is
> auto-requested. This in turn causes the subsequent devm_gpio_request_one()
> to fail. So devm_gpio_request_one() must be called prior to calling
> gpio_set_debounce().
>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Thank you.
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
> ---
> drivers/extcon/extcon-gpio.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index 7e0dff5..4736a9c 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -105,6 +105,12 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> extcon_data->state_off = pdata->state_off;
> if (pdata->state_on && pdata->state_off)
> extcon_data->edev.print_state = extcon_gpio_print_state;
> +
> + ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
> + pdev->name);
> + if (ret < 0)
> + return ret;
> +
> if (pdata->debounce) {
> ret = gpio_set_debounce(extcon_data->gpio,
> pdata->debounce * 1000);
> @@ -117,11 +123,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> if (ret < 0)
> return ret;
>
> - ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
> - pdev->name);
> - if (ret < 0)
> - goto err;
> -
> INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
>
> extcon_data->irq = gpio_to_irq(extcon_data->gpio);
> --
> 1.7.9.7
>
>
ÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
next reply other threads:[~2013-11-25 2:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-25 2:37 MyungJoo Ham [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-11-22 17:26 [PATCH] extcon: gpio: Request gpio pin before modifying its state Guenter Roeck
2013-11-26 7:55 ` Chanwoo Choi
2013-11-26 12:07 ` Guenter Roeck
2013-11-26 22:41 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6748233.22261385347032615.JavaMail.weblogic@epv6ml03 \
--to=myungjoo.ham@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox