* [syzbot] [ocfs2?] KASAN: use-after-free Write in ocfs2_write_end_nolock
@ 2026-04-02 10:40 syzbot
2026-04-02 12:44 ` Joseph Qi
0 siblings, 1 reply; 3+ messages in thread
From: syzbot @ 2026-04-02 10:40 UTC (permalink / raw)
To: jlbec, joseph.qi, linux-kernel, mark, ocfs2-devel, syzkaller-bugs
Hello,
syzbot found the following issue on:
HEAD commit: 9147566d8016 Merge tag 'sched_ext-for-7.0-rc6-fixes' of gi..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=13ec1516580000
kernel config: https://syzkaller.appspot.com/x/.config?x=d46eab0cfd31c214
dashboard link: https://syzkaller.appspot.com/bug?extid=62c1793956716ea8b28a
compiler: Debian clang version 21.1.8 (++20251221033036+2078da43e25a-1~exp1~20251221153213.50), Debian LLD 21.1.8
Unfortunately, I don't have any reproducer for this issue yet.
Downloadable assets:
disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/d900f083ada3/non_bootable_disk-9147566d.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/ccabfb43ed2d/vmlinux-9147566d.xz
kernel image: https://storage.googleapis.com/syzbot-assets/2106f2f69253/bzImage-9147566d.xz
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+62c1793956716ea8b28a@syzkaller.appspotmail.com
loop0: detected capacity change from 0 to 32768
=======================================================
WARNING: The mand mount option has been deprecated and
and is ignored by this kernel. Remove the mand
option from the mount to silence this warning.
=======================================================
JBD2: Ignoring recovery information on journal
ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode.
(syz.0.0,5322,0):ocfs2_check_set_options:1244 ERROR: Invalid heartbeat mount options
loop0: detected capacity change from 32768 to 32767
OCFS2: ERROR (device loop0): int ocfs2_validate_inode_block(struct super_block *, struct buffer_head *): Invalid dinode #17058: signature = ��\x1a�
On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
OCFS2: File system is now read-only.
(syz.0.0,5322,0):ocfs2_assign_bh:2417 ERROR: status = -30
(syz.0.0,5322,0):ocfs2_inode_lock_full_nested:2512 ERROR: status = -30
(syz.0.0,5322,0):ocfs2_reflink_inodes_lock:4748 ERROR: status = -30
==================================================================
BUG: KASAN: use-after-free in memcpy_from_folio include/linux/highmem.h:586 [inline]
BUG: KASAN: use-after-free in ocfs2_write_end_inline fs/ocfs2/aops.c:1915 [inline]
BUG: KASAN: use-after-free in ocfs2_write_end_nolock+0xbd9/0x18f0 fs/ocfs2/aops.c:1949
Write of size 4086 at addr ffff888056da54d2 by task syz.0.0/5322
CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
memcpy_from_folio include/linux/highmem.h:586 [inline]
ocfs2_write_end_inline fs/ocfs2/aops.c:1915 [inline]
ocfs2_write_end_nolock+0xbd9/0x18f0 fs/ocfs2/aops.c:1949
ocfs2_write_end+0x58/0x90 fs/ocfs2/aops.c:2059
generic_perform_write+0x620/0x8f0 mm/filemap.c:4340
ocfs2_file_write_iter+0x1663/0x1ed0 fs/ocfs2/file.c:2476
iter_file_splice_write+0x9a1/0x10f0 fs/splice.c:736
do_splice_from fs/splice.c:936 [inline]
direct_splice_actor+0x101/0x160 fs/splice.c:1159
splice_direct_to_actor+0x53a/0xc70 fs/splice.c:1103
do_splice_direct_actor fs/splice.c:1202 [inline]
do_splice_direct+0x195/0x290 fs/splice.c:1228
vfs_copy_file_range+0xb02/0x1370 fs/read_write.c:1634
__do_sys_copy_file_range fs/read_write.c:1683 [inline]
__se_sys_copy_file_range+0x2fb/0x480 fs/read_write.c:1650
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08bb59c819
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f08bc45dfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000146
RAX: ffffffffffffffda RBX: 00007f08bb815fa0 RCX: 00007f08bb59c819
RDX: 0000000000000004 RSI: 00002000000001c0 RDI: 0000000000000005
RBP: 00007f08bb632c91 R08: ffffffffa003e45b R09: 0700000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f08bb816038 R14: 00007f08bb815fa0 R15: 00007ffcc83fcca8
</TASK>
The buggy address belongs to the physical page:
page: refcount:2 mapcount:0 mapping:ffff88801cc2e6c8 index:0x854 pfn:0x56da5
memcg:ffff88801c6c0d40
aops:def_blk_aops ino:700000 dentry name(?):""
flags: 0x4fff38000004224(referenced|lru|workingset|private|node=1|zone=1|lastcpupid=0x7ff)
raw: 04fff38000004224 ffffea000112e0c8 ffff8880304509e0 ffff88801cc2e6c8
raw: 0000000000000854 ffff888055d47488 00000002ffffffff ffff88801c6c0d40
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Movable, gfp_mask 0x148c48(GFP_NOFS|__GFP_MOVABLE|__GFP_NOFAIL|__GFP_COMP|__GFP_HARDWALL), pid 5322, tgid 5321 (syz.0.0), ts 84485822747, free_ts 84440366295
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x231/0x280 mm/page_alloc.c:1889
prep_new_page mm/page_alloc.c:1897 [inline]
get_page_from_freelist+0x24dc/0x2580 mm/page_alloc.c:3962
__alloc_frozen_pages_noprof+0x18d/0x380 mm/page_alloc.c:5250
alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2490
alloc_frozen_pages_noprof mm/mempolicy.c:2561 [inline]
alloc_pages_noprof+0xa8/0x1a0 mm/mempolicy.c:2581
folio_alloc_noprof+0x1e/0x30 mm/mempolicy.c:2591
filemap_alloc_folio_noprof+0x111/0x470 mm/filemap.c:1013
__filemap_get_folio_mpol+0x3fc/0xb00 mm/filemap.c:2011
__filemap_get_folio include/linux/pagemap.h:763 [inline]
grow_dev_folio fs/buffer.c:1047 [inline]
grow_buffers fs/buffer.c:1113 [inline]
__getblk_slow fs/buffer.c:1131 [inline]
bdev_getblk+0x1f6/0x6e0 fs/buffer.c:1458
__getblk include/linux/buffer_head.h:380 [inline]
sb_getblk include/linux/buffer_head.h:386 [inline]
ocfs2_read_blocks+0x57e/0x15e0 fs/ocfs2/buffer_head_io.c:236
ocfs2_read_inode_block_full fs/ocfs2/inode.c:1735 [inline]
ocfs2_read_inode_block+0xec/0x1d0 fs/ocfs2/inode.c:1749
ocfs2_assign_bh fs/ocfs2/dlmglue.c:2415 [inline]
ocfs2_inode_lock_full_nested+0x2ac/0x1bd0 fs/ocfs2/dlmglue.c:2510
ocfs2_reflink_inodes_lock+0x477/0xc50 fs/ocfs2/refcounttree.c:4744
ocfs2_remap_file_range+0x236/0x6f0 fs/ocfs2/file.c:2721
vfs_copy_file_range+0xd80/0x1370 fs/read_write.c:1600
__do_sys_copy_file_range fs/read_write.c:1683 [inline]
__se_sys_copy_file_range+0x2fb/0x480 fs/read_write.c:1650
page last free pid 5322 tgid 5321 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
__free_pages_prepare mm/page_alloc.c:1433 [inline]
free_unref_folios+0xed5/0x16d0 mm/page_alloc.c:3040
folios_put_refs+0x789/0x8d0 mm/swap.c:1002
folio_batch_release include/linux/pagevec.h:101 [inline]
mapping_try_invalidate+0x3c2/0x4c0 mm/truncate.c:579
loop_set_status+0x29b/0xe40 drivers/block/loop.c:1246
loop_set_status_old drivers/block/loop.c:1362 [inline]
lo_ioctl+0xce6/0x1fb0 drivers/block/loop.c:1551
blkdev_ioctl+0x5e3/0x740 block/ioctl.c:804
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Memory state around the buggy address:
ffff888056da5f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888056da5f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888056da6000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888056da6080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888056da6100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
If the report is already addressed, let syzbot know by replying with:
#syz fix: exact-commit-title
If you want to overwrite report's subsystems, reply with:
#syz set subsystems: new-subsystem
(See the list of subsystem names on the web dashboard)
If the report is a duplicate of another one, reply with:
#syz dup: exact-subject-of-another-report
If you want to undo deduplication, reply with:
#syz undup
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [syzbot] [ocfs2?] KASAN: use-after-free Write in ocfs2_write_end_nolock
2026-04-02 10:40 [syzbot] [ocfs2?] KASAN: use-after-free Write in ocfs2_write_end_nolock syzbot
@ 2026-04-02 12:44 ` Joseph Qi
2026-04-02 12:44 ` syzbot
0 siblings, 1 reply; 3+ messages in thread
From: Joseph Qi @ 2026-04-02 12:44 UTC (permalink / raw)
To: syzbot
Cc: Joel Becker, linux-kernel@vger.kernel.org, Mark Fasheh,
ocfs2-devel@lists.linux.dev, syzkaller-bugs
On 4/2/26 6:40 PM, syzbot wrote:
> Hello,
>
> syzbot found the following issue on:
>
> HEAD commit: 9147566d8016 Merge tag 'sched_ext-for-7.0-rc6-fixes' of gi..
> git tree: upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=13ec1516580000
> kernel config: https://syzkaller.appspot.com/x/.config?x=d46eab0cfd31c214
> dashboard link: https://syzkaller.appspot.com/bug?extid=62c1793956716ea8b28a
> compiler: Debian clang version 21.1.8 (++20251221033036+2078da43e25a-1~exp1~20251221153213.50), Debian LLD 21.1.8
>
> Unfortunately, I don't have any reproducer for this issue yet.
>
> Downloadable assets:
> disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/d900f083ada3/non_bootable_disk-9147566d.raw.xz
> vmlinux: https://storage.googleapis.com/syzbot-assets/ccabfb43ed2d/vmlinux-9147566d.xz
> kernel image: https://storage.googleapis.com/syzbot-assets/2106f2f69253/bzImage-9147566d.xz
>
> IMPORTANT: if you fix the issue, please add the following tag to the commit:
> Reported-by: syzbot+62c1793956716ea8b28a@syzkaller.appspotmail.com
>
> loop0: detected capacity change from 0 to 32768
> =======================================================
> WARNING: The mand mount option has been deprecated and
> and is ignored by this kernel. Remove the mand
> option from the mount to silence this warning.
> =======================================================
> JBD2: Ignoring recovery information on journal
> ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode.
> (syz.0.0,5322,0):ocfs2_check_set_options:1244 ERROR: Invalid heartbeat mount options
> loop0: detected capacity change from 32768 to 32767
> OCFS2: ERROR (device loop0): int ocfs2_validate_inode_block(struct super_block *, struct buffer_head *): Invalid dinode #17058: signature = ��\x1a�
> On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
> OCFS2: File system is now read-only.
> (syz.0.0,5322,0):ocfs2_assign_bh:2417 ERROR: status = -30
> (syz.0.0,5322,0):ocfs2_inode_lock_full_nested:2512 ERROR: status = -30
> (syz.0.0,5322,0):ocfs2_reflink_inodes_lock:4748 ERROR: status = -30
> ==================================================================
> BUG: KASAN: use-after-free in memcpy_from_folio include/linux/highmem.h:586 [inline]
> BUG: KASAN: use-after-free in ocfs2_write_end_inline fs/ocfs2/aops.c:1915 [inline]
> BUG: KASAN: use-after-free in ocfs2_write_end_nolock+0xbd9/0x18f0 fs/ocfs2/aops.c:1949
> Write of size 4086 at addr ffff888056da54d2 by task syz.0.0/5322
>
> CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
> Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
> Call Trace:
> <TASK>
> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
> print_address_description mm/kasan/report.c:378 [inline]
> print_report+0xba/0x230 mm/kasan/report.c:482
> kasan_report+0x117/0x150 mm/kasan/report.c:595
> check_region_inline mm/kasan/generic.c:-1 [inline]
> kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200
> __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
> memcpy_from_folio include/linux/highmem.h:586 [inline]
> ocfs2_write_end_inline fs/ocfs2/aops.c:1915 [inline]
> ocfs2_write_end_nolock+0xbd9/0x18f0 fs/ocfs2/aops.c:1949
> ocfs2_write_end+0x58/0x90 fs/ocfs2/aops.c:2059
> generic_perform_write+0x620/0x8f0 mm/filemap.c:4340
> ocfs2_file_write_iter+0x1663/0x1ed0 fs/ocfs2/file.c:2476
> iter_file_splice_write+0x9a1/0x10f0 fs/splice.c:736
> do_splice_from fs/splice.c:936 [inline]
> direct_splice_actor+0x101/0x160 fs/splice.c:1159
> splice_direct_to_actor+0x53a/0xc70 fs/splice.c:1103
> do_splice_direct_actor fs/splice.c:1202 [inline]
> do_splice_direct+0x195/0x290 fs/splice.c:1228
> vfs_copy_file_range+0xb02/0x1370 fs/read_write.c:1634
> __do_sys_copy_file_range fs/read_write.c:1683 [inline]
> __se_sys_copy_file_range+0x2fb/0x480 fs/read_write.c:1650
> do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
> do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
> entry_SYSCALL_64_after_hwframe+0x77/0x7f
> RIP: 0033:0x7f08bb59c819
> Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
> RSP: 002b:00007f08bc45dfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000146
> RAX: ffffffffffffffda RBX: 00007f08bb815fa0 RCX: 00007f08bb59c819
> RDX: 0000000000000004 RSI: 00002000000001c0 RDI: 0000000000000005
> RBP: 00007f08bb632c91 R08: ffffffffa003e45b R09: 0700000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
> R13: 00007f08bb816038 R14: 00007f08bb815fa0 R15: 00007ffcc83fcca8
> </TASK>
>
> The buggy address belongs to the physical page:
> page: refcount:2 mapcount:0 mapping:ffff88801cc2e6c8 index:0x854 pfn:0x56da5
> memcg:ffff88801c6c0d40
> aops:def_blk_aops ino:700000 dentry name(?):""
> flags: 0x4fff38000004224(referenced|lru|workingset|private|node=1|zone=1|lastcpupid=0x7ff)
> raw: 04fff38000004224 ffffea000112e0c8 ffff8880304509e0 ffff88801cc2e6c8
> raw: 0000000000000854 ffff888055d47488 00000002ffffffff ffff88801c6c0d40
> page dumped because: kasan: bad access detected
> page_owner tracks the page as allocated
> page last allocated via order 0, migratetype Movable, gfp_mask 0x148c48(GFP_NOFS|__GFP_MOVABLE|__GFP_NOFAIL|__GFP_COMP|__GFP_HARDWALL), pid 5322, tgid 5321 (syz.0.0), ts 84485822747, free_ts 84440366295
> set_page_owner include/linux/page_owner.h:32 [inline]
> post_alloc_hook+0x231/0x280 mm/page_alloc.c:1889
> prep_new_page mm/page_alloc.c:1897 [inline]
> get_page_from_freelist+0x24dc/0x2580 mm/page_alloc.c:3962
> __alloc_frozen_pages_noprof+0x18d/0x380 mm/page_alloc.c:5250
> alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2490
> alloc_frozen_pages_noprof mm/mempolicy.c:2561 [inline]
> alloc_pages_noprof+0xa8/0x1a0 mm/mempolicy.c:2581
> folio_alloc_noprof+0x1e/0x30 mm/mempolicy.c:2591
> filemap_alloc_folio_noprof+0x111/0x470 mm/filemap.c:1013
> __filemap_get_folio_mpol+0x3fc/0xb00 mm/filemap.c:2011
> __filemap_get_folio include/linux/pagemap.h:763 [inline]
> grow_dev_folio fs/buffer.c:1047 [inline]
> grow_buffers fs/buffer.c:1113 [inline]
> __getblk_slow fs/buffer.c:1131 [inline]
> bdev_getblk+0x1f6/0x6e0 fs/buffer.c:1458
> __getblk include/linux/buffer_head.h:380 [inline]
> sb_getblk include/linux/buffer_head.h:386 [inline]
> ocfs2_read_blocks+0x57e/0x15e0 fs/ocfs2/buffer_head_io.c:236
> ocfs2_read_inode_block_full fs/ocfs2/inode.c:1735 [inline]
> ocfs2_read_inode_block+0xec/0x1d0 fs/ocfs2/inode.c:1749
> ocfs2_assign_bh fs/ocfs2/dlmglue.c:2415 [inline]
> ocfs2_inode_lock_full_nested+0x2ac/0x1bd0 fs/ocfs2/dlmglue.c:2510
> ocfs2_reflink_inodes_lock+0x477/0xc50 fs/ocfs2/refcounttree.c:4744
> ocfs2_remap_file_range+0x236/0x6f0 fs/ocfs2/file.c:2721
> vfs_copy_file_range+0xd80/0x1370 fs/read_write.c:1600
> __do_sys_copy_file_range fs/read_write.c:1683 [inline]
> __se_sys_copy_file_range+0x2fb/0x480 fs/read_write.c:1650
> page last free pid 5322 tgid 5321 stack trace:
> reset_page_owner include/linux/page_owner.h:25 [inline]
> __free_pages_prepare mm/page_alloc.c:1433 [inline]
> free_unref_folios+0xed5/0x16d0 mm/page_alloc.c:3040
> folios_put_refs+0x789/0x8d0 mm/swap.c:1002
> folio_batch_release include/linux/pagevec.h:101 [inline]
> mapping_try_invalidate+0x3c2/0x4c0 mm/truncate.c:579
> loop_set_status+0x29b/0xe40 drivers/block/loop.c:1246
> loop_set_status_old drivers/block/loop.c:1362 [inline]
> lo_ioctl+0xce6/0x1fb0 drivers/block/loop.c:1551
> blkdev_ioctl+0x5e3/0x740 block/ioctl.c:804
> vfs_ioctl fs/ioctl.c:51 [inline]
> __do_sys_ioctl fs/ioctl.c:597 [inline]
> __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
> do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
> do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
> entry_SYSCALL_64_after_hwframe+0x77/0x7f
>
> Memory state around the buggy address:
> ffff888056da5f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> ffff888056da5f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ffff888056da6000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ^
> ffff888056da6080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ffff888056da6100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ==================================================================
>
>
> ---
> This report is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller@googlegroups.com.
>
> syzbot will keep track of this issue. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>
> If the report is already addressed, let syzbot know by replying with:
> #syz fix: exact-commit-title
>
> If you want to overwrite report's subsystems, reply with:
> #syz set subsystems: new-subsystem
> (See the list of subsystem names on the web dashboard)
>
> If the report is a duplicate of another one, reply with:
> #syz dup: exact-subject-of-another-report
>
> If you want to undo deduplication, reply with:
> #syz undup
#syz test
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 03a51662ea8e..a2ccd8011706 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -1505,6 +1505,16 @@ int ocfs2_validate_inode_block(struct super_block *sb,
goto bail;
}
+ if (le16_to_cpu(data->id_count) >
+ ocfs2_max_inline_data_with_xattr(sb, di)) {
+ rc = ocfs2_error(sb,
+ "Invalid dinode #%llu: inline data id_count %u exceeds max %d\n",
+ (unsigned long long)bh->b_blocknr,
+ le16_to_cpu(data->id_count),
+ ocfs2_max_inline_data_with_xattr(sb, di));
+ goto bail;
+ }
+
if (le64_to_cpu(di->i_size) > le16_to_cpu(data->id_count)) {
rc = ocfs2_error(sb,
"Invalid dinode #%llu: inline data i_size %llu exceeds id_count %u\n",
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [syzbot] [ocfs2?] KASAN: use-after-free Write in ocfs2_write_end_nolock
2026-04-02 12:44 ` Joseph Qi
@ 2026-04-02 12:44 ` syzbot
0 siblings, 0 replies; 3+ messages in thread
From: syzbot @ 2026-04-02 12:44 UTC (permalink / raw)
To: joseph.qi
Cc: jlbec, joseph.qi, linux-kernel, mark, ocfs2-devel, syzkaller-bugs
>
>
> On 4/2/26 6:40 PM, syzbot wrote:
>> Hello,
>>
>> syzbot found the following issue on:
>>
>> HEAD commit: 9147566d8016 Merge tag 'sched_ext-for-7.0-rc6-fixes' of gi..
>> git tree: upstream
>> console output: https://syzkaller.appspot.com/x/log.txt?x=13ec1516580000
>> kernel config: https://syzkaller.appspot.com/x/.config?x=d46eab0cfd31c214
>> dashboard link: https://syzkaller.appspot.com/bug?extid=62c1793956716ea8b28a
>> compiler: Debian clang version 21.1.8 (++20251221033036+2078da43e25a-1~exp1~20251221153213.50), Debian LLD 21.1.8
>>
>> Unfortunately, I don't have any reproducer for this issue yet.
>>
>> Downloadable assets:
>> disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/d900f083ada3/non_bootable_disk-9147566d.raw.xz
>> vmlinux: https://storage.googleapis.com/syzbot-assets/ccabfb43ed2d/vmlinux-9147566d.xz
>> kernel image: https://storage.googleapis.com/syzbot-assets/2106f2f69253/bzImage-9147566d.xz
>>
>> IMPORTANT: if you fix the issue, please add the following tag to the commit:
>> Reported-by: syzbot+62c1793956716ea8b28a@syzkaller.appspotmail.com
>>
>> loop0: detected capacity change from 0 to 32768
>> =======================================================
>> WARNING: The mand mount option has been deprecated and
>> and is ignored by this kernel. Remove the mand
>> option from the mount to silence this warning.
>> =======================================================
>> JBD2: Ignoring recovery information on journal
>> ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode.
>> (syz.0.0,5322,0):ocfs2_check_set_options:1244 ERROR: Invalid heartbeat mount options
>> loop0: detected capacity change from 32768 to 32767
>> OCFS2: ERROR (device loop0): int ocfs2_validate_inode_block(struct super_block *, struct buffer_head *): Invalid dinode #17058: signature = ��\x1a�
>> On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
>> OCFS2: File system is now read-only.
>> (syz.0.0,5322,0):ocfs2_assign_bh:2417 ERROR: status = -30
>> (syz.0.0,5322,0):ocfs2_inode_lock_full_nested:2512 ERROR: status = -30
>> (syz.0.0,5322,0):ocfs2_reflink_inodes_lock:4748 ERROR: status = -30
>> ==================================================================
>> BUG: KASAN: use-after-free in memcpy_from_folio include/linux/highmem.h:586 [inline]
>> BUG: KASAN: use-after-free in ocfs2_write_end_inline fs/ocfs2/aops.c:1915 [inline]
>> BUG: KASAN: use-after-free in ocfs2_write_end_nolock+0xbd9/0x18f0 fs/ocfs2/aops.c:1949
>> Write of size 4086 at addr ffff888056da54d2 by task syz.0.0/5322
>>
>> CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
>> Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
>> Call Trace:
>> <TASK>
>> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
>> print_address_description mm/kasan/report.c:378 [inline]
>> print_report+0xba/0x230 mm/kasan/report.c:482
>> kasan_report+0x117/0x150 mm/kasan/report.c:595
>> check_region_inline mm/kasan/generic.c:-1 [inline]
>> kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200
>> __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
>> memcpy_from_folio include/linux/highmem.h:586 [inline]
>> ocfs2_write_end_inline fs/ocfs2/aops.c:1915 [inline]
>> ocfs2_write_end_nolock+0xbd9/0x18f0 fs/ocfs2/aops.c:1949
>> ocfs2_write_end+0x58/0x90 fs/ocfs2/aops.c:2059
>> generic_perform_write+0x620/0x8f0 mm/filemap.c:4340
>> ocfs2_file_write_iter+0x1663/0x1ed0 fs/ocfs2/file.c:2476
>> iter_file_splice_write+0x9a1/0x10f0 fs/splice.c:736
>> do_splice_from fs/splice.c:936 [inline]
>> direct_splice_actor+0x101/0x160 fs/splice.c:1159
>> splice_direct_to_actor+0x53a/0xc70 fs/splice.c:1103
>> do_splice_direct_actor fs/splice.c:1202 [inline]
>> do_splice_direct+0x195/0x290 fs/splice.c:1228
>> vfs_copy_file_range+0xb02/0x1370 fs/read_write.c:1634
>> __do_sys_copy_file_range fs/read_write.c:1683 [inline]
>> __se_sys_copy_file_range+0x2fb/0x480 fs/read_write.c:1650
>> do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
>> do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
>> entry_SYSCALL_64_after_hwframe+0x77/0x7f
>> RIP: 0033:0x7f08bb59c819
>> Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
>> RSP: 002b:00007f08bc45dfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000146
>> RAX: ffffffffffffffda RBX: 00007f08bb815fa0 RCX: 00007f08bb59c819
>> RDX: 0000000000000004 RSI: 00002000000001c0 RDI: 0000000000000005
>> RBP: 00007f08bb632c91 R08: ffffffffa003e45b R09: 0700000000000000
>> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
>> R13: 00007f08bb816038 R14: 00007f08bb815fa0 R15: 00007ffcc83fcca8
>> </TASK>
>>
>> The buggy address belongs to the physical page:
>> page: refcount:2 mapcount:0 mapping:ffff88801cc2e6c8 index:0x854 pfn:0x56da5
>> memcg:ffff88801c6c0d40
>> aops:def_blk_aops ino:700000 dentry name(?):""
>> flags: 0x4fff38000004224(referenced|lru|workingset|private|node=1|zone=1|lastcpupid=0x7ff)
>> raw: 04fff38000004224 ffffea000112e0c8 ffff8880304509e0 ffff88801cc2e6c8
>> raw: 0000000000000854 ffff888055d47488 00000002ffffffff ffff88801c6c0d40
>> page dumped because: kasan: bad access detected
>> page_owner tracks the page as allocated
>> page last allocated via order 0, migratetype Movable, gfp_mask 0x148c48(GFP_NOFS|__GFP_MOVABLE|__GFP_NOFAIL|__GFP_COMP|__GFP_HARDWALL), pid 5322, tgid 5321 (syz.0.0), ts 84485822747, free_ts 84440366295
>> set_page_owner include/linux/page_owner.h:32 [inline]
>> post_alloc_hook+0x231/0x280 mm/page_alloc.c:1889
>> prep_new_page mm/page_alloc.c:1897 [inline]
>> get_page_from_freelist+0x24dc/0x2580 mm/page_alloc.c:3962
>> __alloc_frozen_pages_noprof+0x18d/0x380 mm/page_alloc.c:5250
>> alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2490
>> alloc_frozen_pages_noprof mm/mempolicy.c:2561 [inline]
>> alloc_pages_noprof+0xa8/0x1a0 mm/mempolicy.c:2581
>> folio_alloc_noprof+0x1e/0x30 mm/mempolicy.c:2591
>> filemap_alloc_folio_noprof+0x111/0x470 mm/filemap.c:1013
>> __filemap_get_folio_mpol+0x3fc/0xb00 mm/filemap.c:2011
>> __filemap_get_folio include/linux/pagemap.h:763 [inline]
>> grow_dev_folio fs/buffer.c:1047 [inline]
>> grow_buffers fs/buffer.c:1113 [inline]
>> __getblk_slow fs/buffer.c:1131 [inline]
>> bdev_getblk+0x1f6/0x6e0 fs/buffer.c:1458
>> __getblk include/linux/buffer_head.h:380 [inline]
>> sb_getblk include/linux/buffer_head.h:386 [inline]
>> ocfs2_read_blocks+0x57e/0x15e0 fs/ocfs2/buffer_head_io.c:236
>> ocfs2_read_inode_block_full fs/ocfs2/inode.c:1735 [inline]
>> ocfs2_read_inode_block+0xec/0x1d0 fs/ocfs2/inode.c:1749
>> ocfs2_assign_bh fs/ocfs2/dlmglue.c:2415 [inline]
>> ocfs2_inode_lock_full_nested+0x2ac/0x1bd0 fs/ocfs2/dlmglue.c:2510
>> ocfs2_reflink_inodes_lock+0x477/0xc50 fs/ocfs2/refcounttree.c:4744
>> ocfs2_remap_file_range+0x236/0x6f0 fs/ocfs2/file.c:2721
>> vfs_copy_file_range+0xd80/0x1370 fs/read_write.c:1600
>> __do_sys_copy_file_range fs/read_write.c:1683 [inline]
>> __se_sys_copy_file_range+0x2fb/0x480 fs/read_write.c:1650
>> page last free pid 5322 tgid 5321 stack trace:
>> reset_page_owner include/linux/page_owner.h:25 [inline]
>> __free_pages_prepare mm/page_alloc.c:1433 [inline]
>> free_unref_folios+0xed5/0x16d0 mm/page_alloc.c:3040
>> folios_put_refs+0x789/0x8d0 mm/swap.c:1002
>> folio_batch_release include/linux/pagevec.h:101 [inline]
>> mapping_try_invalidate+0x3c2/0x4c0 mm/truncate.c:579
>> loop_set_status+0x29b/0xe40 drivers/block/loop.c:1246
>> loop_set_status_old drivers/block/loop.c:1362 [inline]
>> lo_ioctl+0xce6/0x1fb0 drivers/block/loop.c:1551
>> blkdev_ioctl+0x5e3/0x740 block/ioctl.c:804
>> vfs_ioctl fs/ioctl.c:51 [inline]
>> __do_sys_ioctl fs/ioctl.c:597 [inline]
>> __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
>> do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
>> do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
>> entry_SYSCALL_64_after_hwframe+0x77/0x7f
>>
>> Memory state around the buggy address:
>> ffff888056da5f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ffff888056da5f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> ffff888056da6000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ^
>> ffff888056da6080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ffff888056da6100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ==================================================================
>>
>>
>> ---
>> This report is generated by a bot. It may contain errors.
>> See https://goo.gl/tpsmEJ for more information about syzbot.
>> syzbot engineers can be reached at syzkaller@googlegroups.com.
>>
>> syzbot will keep track of this issue. See:
>> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>>
>> If the report is already addressed, let syzbot know by replying with:
>> #syz fix: exact-commit-title
>>
>> If you want to overwrite report's subsystems, reply with:
>> #syz set subsystems: new-subsystem
>> (See the list of subsystem names on the web dashboard)
>>
>> If the report is a duplicate of another one, reply with:
>> #syz dup: exact-subject-of-another-report
>>
>> If you want to undo deduplication, reply with:
>> #syz undup
>
> #syz test
This crash does not have a reproducer. I cannot test it.
>
> diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
> index 03a51662ea8e..a2ccd8011706 100644
> --- a/fs/ocfs2/inode.c
> +++ b/fs/ocfs2/inode.c
> @@ -1505,6 +1505,16 @@ int ocfs2_validate_inode_block(struct super_block *sb,
> goto bail;
> }
>
> + if (le16_to_cpu(data->id_count) >
> + ocfs2_max_inline_data_with_xattr(sb, di)) {
> + rc = ocfs2_error(sb,
> + "Invalid dinode #%llu: inline data id_count %u exceeds max %d\n",
> + (unsigned long long)bh->b_blocknr,
> + le16_to_cpu(data->id_count),
> + ocfs2_max_inline_data_with_xattr(sb, di));
> + goto bail;
> + }
> +
> if (le64_to_cpu(di->i_size) > le16_to_cpu(data->id_count)) {
> rc = ocfs2_error(sb,
> "Invalid dinode #%llu: inline data i_size %llu exceeds id_count %u\n",
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-04-02 12:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-04-02 10:40 [syzbot] [ocfs2?] KASAN: use-after-free Write in ocfs2_write_end_nolock syzbot
2026-04-02 12:44 ` Joseph Qi
2026-04-02 12:44 ` syzbot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox