Re: [syzbot] [usb?] [libertas?] INFO: task hung in lbs_remove_card

Re: [syzbot] [usb?] [libertas?] INFO: task hung in lbs_remove_card

[syzbot]

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

drivers/net/wireless/marvell/libertas/firmware.c:116:47: error: 'flags' undeclared (first use in this function)
./include/linux/wait.h:1035:45: error: lvalue required as unary '&' operand
./include/linux/wait.h:1038:43: error: lvalue required as unary '&' operand


Tested on:

commit:         8f993d30 usb: gadget: f_ncm: validate minimum block_le..
git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
kernel config:  https://syzkaller.appspot.com/x/.config?x=f1500201919951cc
dashboard link: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
compiler:       gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44
patch:          https://syzkaller.appspot.com/x/patch.diff?x=12db1126580000

Re: [syzbot] [usb?] [libertas?] INFO: task hung in lbs_remove_card

[syzbot]

Hello,

syzbot has tested the proposed patch but the reproducer is still triggering an issue:
INFO: task hung in lbs_remove_card

INFO: task kworker/1:0:23 blocked for more than 143 seconds.
      Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:0     state:D stack:23096 pid:23    tgid:23    ppid:2      task_flags:0x4288060 flags:0x00080000
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:5298 [inline]
 __schedule+0xeb1/0x4220 kernel/sched/core.c:6911
 __schedule_loop kernel/sched/core.c:6993 [inline]
 schedule+0xdd/0x390 kernel/sched/core.c:7008
 lbs_wait_for_firmware_load+0x126/0x200 drivers/net/wireless/marvell/libertas/firmware.c:118
 lbs_remove_card+0x84/0x390 drivers/net/wireless/marvell/libertas/main.c:913
 if_usb_disconnect+0xaf/0x2e0 drivers/net/wireless/marvell/libertas/if_usb.c:316
 usb_unbind_interface+0x1dd/0x9e0 drivers/usb/core/driver.c:458
 device_remove drivers/base/dd.c:633 [inline]
 device_remove+0x12a/0x180 drivers/base/dd.c:625
 __device_release_driver drivers/base/dd.c:1344 [inline]
 device_release_driver_internal+0x44e/0x620 drivers/base/dd.c:1367
 bus_remove_device+0x2bc/0x560 drivers/base/bus.c:657
 device_del+0x376/0x9b0 drivers/base/core.c:3880
 usb_disable_device+0x367/0x810 drivers/usb/core/message.c:1478
 usb_disconnect+0x2e2/0x9a0 drivers/usb/core/hub.c:2345
 hub_port_connect drivers/usb/core/hub.c:5407 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5707 [inline]
 port_event drivers/usb/core/hub.c:5871 [inline]
 hub_event+0x1d0c/0x4af0 drivers/usb/core/hub.c:5953
 process_one_work+0xa23/0x19a0 kernel/workqueue.c:3276
 process_scheduled_works kernel/workqueue.c:3359 [inline]
 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3440
 kthread+0x370/0x450 kernel/kthread.c:436
 ret_from_fork+0x6c3/0xcb0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
 </TASK>

Showing all locks held in the system:
5 locks held by kworker/1:0/23:
 #0: ffff8881056ced48 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: process_one_work+0x1310/0x19a0 kernel/workqueue.c:3251
 #1: ffffc9000018fd18 ((work_completion)(&hub->events)){+.+.}-{0:0}, at: process_one_work+0x988/0x19a0 kernel/workqueue.c:3252
 #2: ffff88810bf801e0 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:949 [inline]
 #2: ffff88810bf801e0 (&dev->mutex){....}-{4:4}, at: hub_event+0x1bd/0x4af0 drivers/usb/core/hub.c:5899
 #3: ffff888105f8a1e0 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:949 [inline]
 #3: ffff888105f8a1e0 (&dev->mutex){....}-{4:4}, at: usb_disconnect+0x10a/0x9a0 drivers/usb/core/hub.c:2336
 #4: ffff888115cd11a8 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:949 [inline]
 #4: ffff888115cd11a8 (&dev->mutex){....}-{4:4}, at: __device_driver_lock drivers/base/dd.c:1166 [inline]
 #4: ffff888115cd11a8 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0xb2/0x620 drivers/base/dd.c:1364
1 lock held by khungtaskd/30:
 #0: ffffffff896de760 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:312 [inline]
 #0: ffffffff896de760 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:850 [inline]
 #0: ffffffff896de760 (rcu_read_lock){....}-{1:3}, at: debug_show_all_locks+0x3d/0x184 kernel/locking/lockdep.c:6775
2 locks held by kworker/1:2/1119:
 #0: ffff88810006b148 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1310/0x19a0 kernel/workqueue.c:3251
 #1: ffffc90002f0fd18 ((work_completion)(&fw_work->work)){+.+.}-{0:0}, at: process_one_work+0x988/0x19a0 kernel/workqueue.c:3252
2 locks held by getty/2916:
 #0: ffff8881162c10a0 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 drivers/tty/tty_ldisc.c:243
 #1: ffffc900000432f0 (&ldata->atomic_read_lock){+.+.}-{4:4}, at: n_tty_read+0x419/0x1500 drivers/tty/n_tty.c:2211

=============================================

NMI backtrace for cpu 1
CPU: 1 UID: 0 PID: 30 Comm: khungtaskd Not tainted syzkaller #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/18/2026
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
 nmi_cpu_backtrace.cold+0x12d/0x151 lib/nmi_backtrace.c:113
 nmi_trigger_cpumask_backtrace+0x1d7/0x230 lib/nmi_backtrace.c:62
 trigger_all_cpu_backtrace include/linux/nmi.h:161 [inline]
 __sys_info lib/sys_info.c:157 [inline]
 sys_info+0x141/0x190 lib/sys_info.c:165
 check_hung_uninterruptible_tasks kernel/hung_task.c:346 [inline]
 watchdog+0xd25/0x1050 kernel/hung_task.c:515
 kthread+0x370/0x450 kernel/kthread.c:436
 ret_from_fork+0x6c3/0xcb0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
 </TASK>
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/18/2026
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:63
Code: ee b0 01 e9 53 e8 02 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 b7 1c 00 fb f4 <c3> cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90
RSP: 0018:ffffffff89407e10 EFLAGS: 00000246
RAX: 00000000000fd0eb RBX: ffffffff8942ea40 RCX: ffffffff8769c8d5
RDX: 0000000000000000 RSI: ffffffff890241d2 RDI: ffffffff87afcca0
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed103eac672d
R10: ffff8881f563396b R11: 0000000000000000 R12: 0000000000000000
R13: fffffbfff1285d48 R14: 0000000000000000 R15: ffffffff8af019d0
FS:  0000000000000000(0000) GS:ffff8882686ca000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f494d6c5900 CR3: 0000000126532000 CR4: 00000000003506f0
Call Trace:
 <TASK>
 arch_safe_halt arch/x86/include/asm/paravirt.h:73 [inline]
 default_idle+0x9/0x10 arch/x86/kernel/process.c:767
 default_idle_call+0x6c/0xb0 kernel/sched/idle.c:122
 cpuidle_idle_call kernel/sched/idle.c:199 [inline]
 do_idle+0x464/0x590 kernel/sched/idle.c:352
 cpu_startup_entry+0x4f/0x60 kernel/sched/idle.c:451
 rest_init+0x251/0x260 init/main.c:760
 start_kernel+0x47a/0x480 init/main.c:1210
 x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
 x86_64_start_kernel+0x12b/0x130 arch/x86/kernel/head64.c:291
 common_startup_64+0x13e/0x148
 </TASK>


Tested on:

commit:         8f993d30 usb: gadget: f_ncm: validate minimum block_le..
git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
console output: https://syzkaller.appspot.com/x/log.txt?x=12ca6df6580000
kernel config:  https://syzkaller.appspot.com/x/.config?x=dd0e4d4150f9f1da
dashboard link: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
compiler:       gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44
patch:          https://syzkaller.appspot.com/x/patch.diff?x=1148ddf6580000

Re: [syzbot] [usb?] [libertas?] INFO: task hung in lbs_remove_card

[syzbot]

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

./include/linux/wait.h:1035:45: error: lvalue required as unary '&' operand
./include/linux/wait.h:1038:43: error: lvalue required as unary '&' operand


Tested on:

commit:         8f993d30 usb: gadget: f_ncm: validate minimum block_le..
git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
kernel config:  https://syzkaller.appspot.com/x/.config?x=f1500201919951cc
dashboard link: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
compiler:       gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44
patch:          https://syzkaller.appspot.com/x/patch.diff?x=14a573ca580000

Re: [syzbot] [usb?] [libertas?] INFO: task hung in lbs_remove_card

[syzbot]

Hello,

syzbot has tested the proposed patch but the reproducer is still triggering an issue:
INFO: task hung in lbs_remove_card

INFO: task kworker/0:1:10 blocked for more than 143 seconds.
      Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:1     state:D stack:27608 pid:10    tgid:10    ppid:2      task_flags:0x4288060 flags:0x00080000
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:5298 [inline]
 __schedule+0xeb1/0x4220 kernel/sched/core.c:6911
 __schedule_loop kernel/sched/core.c:6993 [inline]
 schedule+0xdd/0x390 kernel/sched/core.c:7008
 lbs_wait_for_firmware_load+0x11e/0x1e0 drivers/net/wireless/marvell/libertas/firmware.c:116
 lbs_remove_card+0xb5/0x3d0 drivers/net/wireless/marvell/libertas/main.c:914
 if_usb_disconnect+0xaf/0x2e0 drivers/net/wireless/marvell/libertas/if_usb.c:316
 usb_unbind_interface+0x1dd/0x9e0 drivers/usb/core/driver.c:458
 device_remove drivers/base/dd.c:633 [inline]
 device_remove+0x12a/0x180 drivers/base/dd.c:625
 __device_release_driver drivers/base/dd.c:1344 [inline]
 device_release_driver_internal+0x44e/0x620 drivers/base/dd.c:1367
 bus_remove_device+0x2bc/0x560 drivers/base/bus.c:657
 device_del+0x376/0x9b0 drivers/base/core.c:3880
 usb_disable_device+0x367/0x810 drivers/usb/core/message.c:1478
 usb_disconnect+0x2e2/0x9a0 drivers/usb/core/hub.c:2345
 hub_port_connect drivers/usb/core/hub.c:5407 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5707 [inline]
 port_event drivers/usb/core/hub.c:5871 [inline]
 hub_event+0x1d0c/0x4af0 drivers/usb/core/hub.c:5953
 process_one_work+0xa23/0x19a0 kernel/workqueue.c:3276
 process_scheduled_works kernel/workqueue.c:3359 [inline]
 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3440
 kthread+0x370/0x450 kernel/kthread.c:436
 ret_from_fork+0x6c3/0xcb0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
 </TASK>

Showing all locks held in the system:
5 locks held by kworker/0:1/10:
 #0: ffff888103ae8148 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: process_one_work+0x1310/0x19a0 kernel/workqueue.c:3251
 #1: ffffc900000afd18 ((work_completion)(&hub->events)){+.+.}-{0:0}, at: process_one_work+0x988/0x19a0 kernel/workqueue.c:3252
 #2: ffff88810b7d31e0 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:949 [inline]
 #2: ffff88810b7d31e0 (&dev->mutex){....}-{4:4}, at: hub_event+0x1bd/0x4af0 drivers/usb/core/hub.c:5899
 #3: ffff88810429b1e0 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:949 [inline]
 #3: ffff88810429b1e0 (&dev->mutex){....}-{4:4}, at: usb_disconnect+0x10a/0x9a0 drivers/usb/core/hub.c:2336
 #4: ffff88810429a1a8 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:949 [inline]
 #4: ffff88810429a1a8 (&dev->mutex){....}-{4:4}, at: __device_driver_lock drivers/base/dd.c:1166 [inline]
 #4: ffff88810429a1a8 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0xb2/0x620 drivers/base/dd.c:1364
2 locks held by kworker/1:0/23:
 #0: ffff88810006b148 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1310/0x19a0 kernel/workqueue.c:3251
 #1: ffffc9000018fd18 ((work_completion)(&fw_work->work)){+.+.}-{0:0}, at: process_one_work+0x988/0x19a0 kernel/workqueue.c:3252
1 lock held by khungtaskd/30:
 #0: ffffffff896de760 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:312 [inline]
 #0: ffffffff896de760 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:850 [inline]
 #0: ffffffff896de760 (rcu_read_lock){....}-{1:3}, at: debug_show_all_locks+0x3d/0x184 kernel/locking/lockdep.c:6775
2 locks held by getty/2917:
 #0: ffff888115e3a0a0 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 drivers/tty/tty_ldisc.c:243
 #1: ffffc900000432f0 (&ldata->atomic_read_lock){+.+.}-{4:4}, at: n_tty_read+0x419/0x1500 drivers/tty/n_tty.c:2211

=============================================

NMI backtrace for cpu 1
CPU: 1 UID: 0 PID: 30 Comm: khungtaskd Not tainted syzkaller #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/18/2026
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
 nmi_cpu_backtrace.cold+0x12d/0x151 lib/nmi_backtrace.c:113
 nmi_trigger_cpumask_backtrace+0x1d7/0x230 lib/nmi_backtrace.c:62
 trigger_all_cpu_backtrace include/linux/nmi.h:161 [inline]
 __sys_info lib/sys_info.c:157 [inline]
 sys_info+0x141/0x190 lib/sys_info.c:165
 check_hung_uninterruptible_tasks kernel/hung_task.c:346 [inline]
 watchdog+0xd25/0x1050 kernel/hung_task.c:515
 kthread+0x370/0x450 kernel/kthread.c:436
 ret_from_fork+0x6c3/0xcb0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
 </TASK>
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/18/2026
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:63
Code: ee b0 01 e9 53 e8 02 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 b7 1c 00 fb f4 <c3> cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90
RSP: 0018:ffffffff89407e10 EFLAGS: 00000242
RAX: 00000000000fd60d RBX: ffffffff8942ea40 RCX: ffffffff8769c8d5
RDX: 0000000000000000 RSI: ffffffff890241d2 RDI: ffffffff87afcca0
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed103eac672d
R10: ffff8881f563396b R11: 0000000000000000 R12: 0000000000000000
R13: fffffbfff1285d48 R14: 0000000000000000 R15: ffffffff8af019d0
FS:  0000000000000000(0000) GS:ffff8882686ca000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdba9235900 CR3: 0000000105f12000 CR4: 00000000003506f0
Call Trace:
 <TASK>
 arch_safe_halt arch/x86/include/asm/paravirt.h:73 [inline]
 default_idle+0x9/0x10 arch/x86/kernel/process.c:767
 default_idle_call+0x6c/0xb0 kernel/sched/idle.c:122
 cpuidle_idle_call kernel/sched/idle.c:199 [inline]
 do_idle+0x464/0x590 kernel/sched/idle.c:352
 cpu_startup_entry+0x4f/0x60 kernel/sched/idle.c:451
 rest_init+0x251/0x260 init/main.c:760
 start_kernel+0x47a/0x480 init/main.c:1210
 x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
 x86_64_start_kernel+0x12b/0x130 arch/x86/kernel/head64.c:291
 common_startup_64+0x13e/0x148
 </TASK>


Tested on:

commit:         8f993d30 usb: gadget: f_ncm: validate minimum block_le..
git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
console output: https://syzkaller.appspot.com/x/log.txt?x=113b23ca580000
kernel config:  https://syzkaller.appspot.com/x/.config?x=dd0e4d4150f9f1da
dashboard link: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
compiler:       gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44
patch:          https://syzkaller.appspot.com/x/patch.diff?x=16126df6580000