The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Hongling Zeng <zhongling0719@126.com>
To: Hyunchul Lee <hyc.lee@gmail.com>,
	 Hongling Zeng <zenghongling@kylinos.cn>
Cc: linkinjeon@kernel.org, ntfs@lists.linux.dev,
	 linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ntfs: handle a failed size rollback in the write error path
Date: Mon, 19 Oct 2026 14:28:52 +0800	[thread overview]
Message-ID: <6AD5B8A4.5090307@126.com> (raw)
In-Reply-To: <asSM3LZyQymjjuj8@hyunchul-PC02>


在 2026年10月06日 13:53, Hyunchul Lee 写道:
> On Sun, Oct 04, 2026 at 10:48:22AM +0800, Hongling Zeng wrote:
>> ntfs_file_write_iter() extends the data and initialized sizes before
>> it copies the user data and restores them when the write then fails.
>> The restoration is best-effort: both results are discarded, even
>> though the extension is already recorded in the dirty MFT record.
>> When the restoration fails too, the extended sizes reach the disk
>> while the VFS inode keeps reporting the old ones: after a remount the
>> file appears grown again, with an uninitialized tail where the failed
>> write never put any data, and nothing records the failure.
>>
>> Keep both undo results: on failure, set NVolSetErrors(), which the next
>> persistence point persists as VOLUME_IS_DIRTY, and log a message for
>> the errors= policy.
>>
>> Fixes: 9c87959601e8 ("ntfs: update file operations")
>> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
>> ---
>>   fs/ntfs/file.c | 29 +++++++++++++++++++++++++++--
>>   1 file changed, 27 insertions(+), 2 deletions(-)
>>
>> diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
>> index 3ec82715a588..b5b30e44ac51 100644
>> --- a/fs/ntfs/file.c
>> +++ b/fs/ntfs/file.c
>> @@ -678,14 +678,39 @@ static ssize_t ntfs_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
>>   				&ntfs_iomap_folio_ops, NULL);
>>   out:
>>   	if (ret < 0 && ret != -EIOCBQUEUED) {
>> +		int undo_err = 0;
>> +
>>   		if (ni->initialized_size != old_init_size) {
>> +			int init_err;
>> +
>>   			mutex_lock(&ni->mrec_lock);
>> -			ntfs_attr_set_initialized_size(ni, old_init_size);
>> +			init_err = ntfs_attr_set_initialized_size(ni,
>> +					old_init_size);
> I think the rollback needs to distinguish resident and compressed
> attributes.
> If the data attribute is still resident,
> ntfs_attr_set_initialized_size() always return -EINVAL.
>
Hi  Hyunchul:
you are right, thanks.  The initialized size rollback now skips a
   resident attribute, where the data size rollback restores both coupled
   sizes, and ntfs_attr_truncate() is skipped on a compressed attribute
   with a warning.
>>   			mutex_unlock(&ni->mrec_lock);
>> +			if (init_err && !undo_err)
>> +				undo_err = init_err;
>>   		}
>>   		if (ni->data_size != old_data_size) {
>> +			int data_err;
>> +
>>   			truncate_setsize(vi, old_data_size);
>> -			ntfs_attr_truncate(ni, old_data_size);
>> +			data_err = ntfs_attr_truncate(ni, old_data_size);
> And ntfs_attr_truncate() always return -EOPNOTSUPP for a compressed
> attribute.
>
>> +			if (data_err && !undo_err)
>> +				undo_err = data_err;
>> +		}
>> +		if (undo_err) {
>> +			/*
>> +			 * The extension is recorded in the dirty MFT
>> +			 * record already, so a failed rollback leaves the
>> +			 * new sizes on disk while the VFS inode keeps
>> +			 * reporting the old ones.  Record the error: the
>> +			 * next persistence point persists it as
>> +			 * VOLUME_IS_DIRTY.  Run chkdsk.
>> +			 */
>> +			NVolSetErrors(vol);
>> +			ntfs_error(vi->i_sb,
>> +				   "Failed to roll back the size update: %d",
>> +				   undo_err);
>>   		}
>>   	}
>>   out_lock:
>> -- 
>> 2.25.1
>>


      reply	other threads:[~2026-10-19  6:30 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-04  2:48 [PATCH] ntfs: handle a failed size rollback in the write error path Hongling Zeng
2026-10-06  5:53 ` Hyunchul Lee
2026-10-19  6:28   ` Hongling Zeng [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6AD5B8A4.5090307@126.com \
    --to=zhongling0719@126.com \
    --cc=hyc.lee@gmail.com \
    --cc=linkinjeon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ntfs@lists.linux.dev \
    --cc=zenghongling@kylinos.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox