Re: [PATCH v2 3/3] clk: qcom: Add Global Clock controller (GCC) driver for SC7180

[Taniya Das <tdas@codeaurora.org>]

Hi Stephen,

Thanks for your review.

On 8/21/2019 11:31 PM, Stephen Boyd wrote:
> Quoting Taniya Das (2019-08-19 09:37:48)
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index e1ff83cc361e..ebd4902afd9f 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -322,5 +331,4 @@ config KRAITCC
>>          help
>>            Support for the Krait CPU clocks on Qualcomm devices.
>>            Say Y if you want to support CPU frequency scaling.
>> -
>>   endif
> 
> Please remove this hunk
> 

Would remove this.

>> diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
>> new file mode 100644
>> index 000000000000..8718b675d609
>> --- /dev/null
>> +++ b/drivers/clk/qcom/gcc-sc7180.c
> [...]
>> +       },
>> +};
>> +
>> +/* Camera Subsystem requires always ON. */
> 
> Yes, but why? This comment is useful unless it explains why.
> 

Next patch would take care.

>> +static struct clk_branch gcc_camera_ahb_clk = {
>> +       .halt_reg = 0xb008,
>> +       .halt_check = BRANCH_HALT,
>> +       .hwcg_reg = 0xb008,
>> +       .hwcg_bit = 1,
>> +       .clkr = {
>> +               .enable_reg = 0xb008,
>> +               .enable_mask = BIT(0),
>> +               .hw.init = &(struct clk_init_data){
>> +                       .name = "gcc_camera_ahb_clk",
>> +                       .flags = CLK_IS_CRITICAL,
>> +                       .ops = &clk_branch2_ops,
>> +               },
>> +       },
>> +};
>> +
>> +static struct clk_branch gcc_camera_hf_axi_clk = {
>> +       .halt_reg = 0xb020,
>> +       .halt_check = BRANCH_HALT,
>> +       .clkr = {
>> +               .enable_reg = 0xb020,
>> +               .enable_mask = BIT(0),

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--