The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Brian Masney <masneyb@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>,
	Brian Masney <bmasney+clk@redhat.com>,
	Jerome Brunet <jbrunet+clk@baylibre.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Felix Fietkau <nbd@nbd.name>,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v13 5/5] clk: en7523: add support for Airoha AN7583 clock
Date: Sat, 21 Nov 2026 00:33:13 +0100	[thread overview]
Message-ID: <6b00d8bb.5576de51.27441d.756e@mx.google.com> (raw)
In-Reply-To: <179513295004.301584.12820965897975670200.b4-review@b4>

On Thu, Nov 19, 2026 at 07:02:30PM -0500, Brian Masney wrote:
> > Add support for Airoha AN7583 clock and reset.
> > 
> > Airoha AN7583 SoC have the same register address of EN7581 but implement
> > different bits and additional base clocks. Also reset are different with
> > the introduction of 2 dedicated MDIO line and drop of some reset lines.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> >  drivers/clk/clk-en7523.c | 249 +++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 249 insertions(+)
> >
> > diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> > index 90bb86427c29..a7cb8dbcb048 100644
> > --- a/drivers/clk/clk-en7523.c
> > +++ b/drivers/clk/clk-en7523.c
> > @@ -13,6 +13,7 @@
> >  #include <linux/reset-controller.h>
> >  #include <linux/spinlock.h>
> >  #include <dt-bindings/clock/en7523-clk.h>
> > +#include <dt-bindings/reset/airoha,an7583-reset.h>
> >  #include <dt-bindings/reset/airoha,en7523-reset.h>
> >  #include <dt-bindings/reset/airoha,en7581-reset.h>
> >  #include <dt-bindings/clock/econet,en751221-scu.h>
> > @@ -167,6 +168,14 @@ static const u32 crypto_base[] = { 540000000, 480000000 };
> >  static const u32 emmc7581_base[] = { 200000000, 150000000 };
> >  /* EN751221 */
> >  static const u32 gsw751221_base[] = { 500000000, 250000000, 400000000, 200000000 };
> > +/* AN7583 */
> > +static const u32 gsw7583_base[] = { 540672000, 270336000, 400000000, 200000000 };
> > +static const u32 emi7583_base[] = { 540672000, 480000000, 400000000, 300000000 };
> > +static const u32 bus7583_base[] = { 600000000, 540672000, 480000000, 400000000 };
> > +static const u32 spi7583_base[] = { 400000000, 12500000 };
> > +static const u32 npu7583_base[] = { 666000000, 800000000, 720000000, 600000000 };
> > +static const u32 crypto7583_base[] = { 540672000, 400000000 };
> > +static const u32 emmc7583_base[] = { 150000000, 200000000 };
> >  
> >  static const struct en_clk_desc en7523_base_clks[] = {
> >  	{
> > @@ -369,6 +378,138 @@ static const struct en_clk_desc en7581_base_clks[] = {
> >  	}
> >  };
> >  
> > +static const struct en_clk_desc an7583_base_clks[] = {
> > +	{
> > +		.id = EN7523_CLK_GSW,
> > +		.name = "gsw",
> > +
> > +		.base_reg = REG_GSW_CLK_DIV_SEL,
> > +		.base_bits = 2,
> > +		.base_shift = 8,
> > +		.base_values = gsw7583_base,
> > +		.n_base_values = ARRAY_SIZE(gsw7583_base),
> > +
> > +		.div_bits = 3,
> > +		.div_shift = 0,
> > +		.div_step = 1,
> > +		.div_offset = 1,
> > +	}, {
> > +		.id = EN7523_CLK_EMI,
> > +		.name = "emi",
> > +
> > +		.base_reg = REG_EMI_CLK_DIV_SEL,
> > +		.base_bits = 2,
> > +		.base_shift = 8,
> > +		.base_values = emi7583_base,
> > +		.n_base_values = ARRAY_SIZE(emi7583_base),
> > +
> > +		.div_bits = 3,
> > +		.div_shift = 0,
> > +		.div_step = 1,
> > +		.div_offset = 1,
> > +	}, {
> > +		.id = EN7523_CLK_BUS,
> > +		.name = "bus",
> > +
> > +		.base_reg = REG_BUS_CLK_DIV_SEL,
> > +		.base_bits = 2,
> > +		.base_shift = 8,
> > +		.base_values = bus7583_base,
> > +		.n_base_values = ARRAY_SIZE(bus7583_base),
> > +
> > +		.div_bits = 3,
> > +		.div_shift = 0,
> > +		.div_step = 1,
> > +		.div_offset = 1,
> > +	}, {
> > +		.id = EN7523_CLK_SLIC,
> > +		.name = "slic",
> > +
> > +		.base_reg = REG_SPI_CLK_FREQ_SEL,
> > +		.base_bits = 1,
> > +		.base_shift = 1,
> > +		.base_values = slic_base,
> > +		.n_base_values = ARRAY_SIZE(slic_base),
> > +
> > +		.div_reg = REG_SPI_CLK_DIV_SEL,
> > +		.div_bits = 5,
> > +		.div_shift = 24,
> > +		.div_val0 = 20,
> > +		.div_step = 2,
> > +	}, {
> > +		.id = EN7523_CLK_SPI,
> > +		.name = "spi",
> > +
> > +		.base_reg = REG_SPI_CLK_FREQ_SEL,
> > +		.base_bits = 1,
> > +		.base_shift = 0,
> > +		.base_values = spi7583_base,
> > +		.n_base_values = ARRAY_SIZE(spi7583_base),
> > +
> > +		.div_reg = REG_SPI_CLK_DIV_SEL,
> > +		.div_bits = 5,
> > +		.div_shift = 8,
> > +		.div_val0 = 40,
> > +		.div_step = 2,
> > +	}, {
> > +		.id = EN7523_CLK_NPU,
> > +		.name = "npu",
> > +
> > +		.base_reg = REG_NPU_CLK_DIV_SEL,
> > +		.base_bits = 2,
> > +		.base_shift = 9,
> > +		.base_values = npu7583_base,
> > +		.n_base_values = ARRAY_SIZE(npu7583_base),
> > +
> > +		.div_bits = 3,
> > +		.div_shift = 0,
> > +		.div_step = 1,
> > +		.div_offset = 1,
> > +	}, {
> > +		.id = EN7523_CLK_CRYPTO,
> > +		.name = "crypto",
> > +
> > +		.base_reg = REG_CRYPTO_CLKSRC2,
> > +		.base_bits = 1,
> > +		.base_shift = 0,
> > +		.base_values = crypto7583_base,
> > +		.n_base_values = ARRAY_SIZE(crypto7583_base),
> > +	}, {
> > +		.id = EN7581_CLK_EMMC,
> > +		.name = "emmc",
> > +
> > +		.base_reg = REG_CRYPTO_CLKSRC2,
> > +		.base_bits = 1,
> > +		.base_shift = 13,
> > +		.base_values = emmc7583_base,
> > +		.n_base_values = ARRAY_SIZE(emmc7583_base),
> > +	}, {
> > +		.id = AN7583_CLK_MDIO0,
> > +		.name = "mdio0",
> > +
> > +		.base_reg = REG_CRYPTO_CLKSRC2,
> > +
> > +		.base_value = 25000000,
> > +
> > +		.div_bits = 4,
> > +		.div_shift = 15,
> > +		.div_step = 1,
> > +		.div_offset = 1,
> > +	}, {
> > +		.id = AN7583_CLK_MDIO1,
> > +		.name = "mdio1",
> > +
> > +		.base_reg = REG_CRYPTO_CLKSRC2,
> > +
> > +		.base_value = 25000000,
> > +
> > +		.div_bits = 4,
> > +		.div_shift = 19,
> > +		.div_step = 1,
> > +		.div_offset = 1,
> > +	}
> > +};
> > +
> >  static const u16 en7581_rst_ofs[] = {
> >  	REG_RST_CTRL2,
> >  	REG_RST_CTRL1,
> > @@ -544,6 +685,64 @@ static const u16 en751221_rst_map[] = {
> >  	[EN751221_USB_PHY_P1_RST]	= 3 * RST_NR_PER_BANK + 7,
> >  };
> >  
> > +static const u16 an7583_rst_map[] = {
> > +	/* RST_CTRL2 */
> > +	[AN7583_XPON_PHY_RST]		= 0,
> > +	[AN7583_GPON_OLT_RST]		= 1,
> > +	[AN7583_CPU_TIMER2_RST]		= 2,
> > +	[AN7583_HSUART_RST]		= 3,
> > +	[AN7583_UART4_RST]		= 4,
> > +	[AN7583_UART5_RST]		= 5,
> > +	[AN7583_I2C2_RST]		= 6,
> > +	[AN7583_XSI_MAC_RST]		= 7,
> > +	[AN7583_XSI_PHY_RST]		= 8,
> > +	[AN7583_NPU_RST]		= 9,
> > +	[AN7583_TRNG_MSTART_RST]	= 12,
> > +	[AN7583_DUAL_HSI0_RST]		= 13,
> > +	[AN7583_DUAL_HSI1_RST]		= 14,
> > +	[AN7583_DUAL_HSI0_MAC_RST]	= 16,
> > +	[AN7583_DUAL_HSI1_MAC_RST]	= 17,
> > +	[AN7583_XPON_XFI_RST]		= 18,
> > +	[AN7583_WDMA_RST]		= 19,
> > +	[AN7583_WOE0_RST]		= 20,
> > +	[AN7583_HSDMA_RST]		= 22,
> > +	[AN7583_TDMA_RST]		= 24,
> > +	[AN7583_EMMC_RST]		= 25,
> > +	[AN7583_SOE_RST]		= 26,
> > +	[AN7583_XFP_MAC_RST]		= 28,
> > +	[AN7583_MDIO0_RST]		= 30,
> > +	[AN7583_MDIO1_RST]		= 31,
> > +	/* RST_CTRL1 */
> > +	[AN7583_PCM1_ZSI_ISI_RST]	= RST_NR_PER_BANK + 0,
> > +	[AN7583_FE_PDMA_RST]		= RST_NR_PER_BANK + 1,
> > +	[AN7583_FE_QDMA_RST]		= RST_NR_PER_BANK + 2,
> > +	[AN7583_PCM_SPIWP_RST]		= RST_NR_PER_BANK + 4,
> > +	[AN7583_CRYPTO_RST]		= RST_NR_PER_BANK + 6,
> > +	[AN7583_TIMER_RST]		= RST_NR_PER_BANK + 8,
> > +	[AN7583_PCM1_RST]		= RST_NR_PER_BANK + 11,
> > +	[AN7583_UART_RST]		= RST_NR_PER_BANK + 12,
> > +	[AN7583_GPIO_RST]		= RST_NR_PER_BANK + 13,
> > +	[AN7583_GDMA_RST]		= RST_NR_PER_BANK + 14,
> > +	[AN7583_I2C_MASTER_RST]		= RST_NR_PER_BANK + 16,
> > +	[AN7583_PCM2_ZSI_ISI_RST]	= RST_NR_PER_BANK + 17,
> > +	[AN7583_SFC_RST]		= RST_NR_PER_BANK + 18,
> > +	[AN7583_UART2_RST]		= RST_NR_PER_BANK + 19,
> > +	[AN7583_GDMP_RST]		= RST_NR_PER_BANK + 20,
> > +	[AN7583_FE_RST]			= RST_NR_PER_BANK + 21,
> > +	[AN7583_USB_HOST_P0_RST]	= RST_NR_PER_BANK + 22,
> > +	[AN7583_GSW_RST]		= RST_NR_PER_BANK + 23,
> > +	[AN7583_SFC2_PCM_RST]		= RST_NR_PER_BANK + 25,
> > +	[AN7583_PCIE0_RST]		= RST_NR_PER_BANK + 26,
> > +	[AN7583_PCIE1_RST]		= RST_NR_PER_BANK + 27,
> > +	[AN7583_CPU_TIMER_RST]		= RST_NR_PER_BANK + 28,
> > +	[AN7583_PCIE_HB_RST]		= RST_NR_PER_BANK + 29,
> > +	[AN7583_XPON_MAC_RST]		= RST_NR_PER_BANK + 31,
> > +
> > +	/* RST_PCIC */
> > +	[AN7583_PCIC_PERSTOUT0_RST]	= 2 * RST_NR_PER_BANK + 29,
> > +	[AN7583_PCIC_PERSTOUT1_RST]	= 2 * RST_NR_PER_BANK + 26,
> > +};
> > +
> >  static int en7581_reset_register(struct device *dev, void __iomem *base,
> >  				 const u16 *rst_map, int nr_resets,
> >  				 const u16 *rst_reg_ofs);
> > @@ -1149,6 +1348,43 @@ static int en7581_clk_hw_init(struct platform_device *pdev,
> >  	return en7581_serdes_phy_register(&pdev->dev);
> >  }
> >  
> > +static int an7583_clk_hw_init(struct platform_device *pdev,
> > +			      struct clk_hw_onecell_data *clk_data)
> > +{
> > +	struct en_clk_priv *priv = platform_get_drvdata(pdev);
> > +	struct device *dev = &pdev->dev;
> > +	struct regmap *map;
> > +	void __iomem *base;
> > +	u32 val;
> > +	int ret;
> > +
> > +	map = syscon_regmap_lookup_by_phandle(dev->of_node, "airoha,chip-scu");
> > +	if (IS_ERR(map))
> > +		return PTR_ERR(map);
> > +
> > +	base = devm_platform_ioremap_resource(pdev, 0);
> > +	if (IS_ERR(base))
> > +		return PTR_ERR(base);
> > +
> > +	priv->base = base;
> > +
> > +	en7581_register_clocks(dev, clk_data, map, base);
> 
> The Sashiko output looks legit here about the missing .set_rate,
> .round_rate, or .determine_rate callbacks.
> 

It's getting handled by a different series... It's really to keep things
split and speedup review process. When one of the 2 gets merged, I will
quickly rebase the other if needed.

(honestly was done to not make a big series)

-- 
	Ansuel

      reply	other threads:[~2026-11-20 23:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 18:24 [PATCH v13 0/5] clk: add support for Airoha AN7583 clock Christian Marangi
2026-11-17 18:24 ` [PATCH v13 1/5] dt-bindings: clock: airoha: Document support for " Christian Marangi
2026-11-20  0:02   ` Brian Masney
2026-11-17 18:24 ` [PATCH v13 2/5] clk: en7523: use devm variant for clk_hw_register and fixed clock Christian Marangi
2026-11-17 18:24 ` [PATCH v13 3/5] clk: en7523: protect concurrent access to reset and PCI register Christian Marangi
2026-11-20  0:02   ` Brian Masney
2026-11-17 18:24 ` [PATCH v13 4/5] clk: en7523: generalize register clocks function Christian Marangi
2026-11-20  0:04   ` Brian Masney
2026-11-17 18:24 ` [PATCH v13 5/5] clk: en7523: add support for Airoha AN7583 clock Christian Marangi
2026-11-20  0:02   ` Brian Masney
2026-11-20 23:33     ` Christian Marangi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6b00d8bb.5576de51.27441d.756e@mx.google.com \
    --to=ansuelsmth@gmail.com \
    --cc=bmasney+clk@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet+clk@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masneyb@kernel.org \
    --cc=nbd@nbd.name \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox