From: Karol Wachowski <karol.wachowski@linux.intel.com>
To: Marco Crivellari <marco.crivellari@suse.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Cc: Tejun Heo <tj@kernel.org>, Lai Jiangshan <jiangshanlai@gmail.com>,
Frederic Weisbecker <frederic@kernel.org>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Michal Hocko <mhocko@suse.com>,
Maciej Falkowski <maciej.falkowski@linux.intel.com>,
Oded Gabbay <ogabbay@kernel.org>
Subject: Re: [PATCH v2 2/2] accel/ivpu: replace use of system_wq with system_percpu_wq
Date: Thu, 30 Oct 2025 08:46:57 +0100 [thread overview]
Message-ID: <6cfbb32b-7866-4fcc-98a3-1ded4558d43f@linux.intel.com> (raw)
In-Reply-To: <eafe034a-0c87-452e-b202-bd53fbdf12ac@linux.intel.com>
On 10/29/2025 9:02 PM, Karol Wachowski wrote:
> On 10/29/2025 5:56 PM, Marco Crivellari wrote:
>> Currently if a user enqueue a work item using schedule_delayed_work() the
>> used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
>> WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
>> schedule_work() that is using system_wq and queue_work(), that makes use
>> again of WORK_CPU_UNBOUND.
>>
>> This lack of consistency cannot be addressed without refactoring the API.
>>
>> system_wq should be the per-cpu workqueue, yet in this name nothing makes
>> that clear, so replace system_wq with system_percpu_wq.
>>
>> The old wq (system_wq) will be kept for a few release cycles.
>>
>> Suggested-by: Tejun Heo <tj@kernel.org>
>> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
>> ---
>> drivers/accel/ivpu/ivpu_hw_btrs.c | 2 +-
>> drivers/accel/ivpu/ivpu_ipc.c | 2 +-
>> drivers/accel/ivpu/ivpu_job.c | 2 +-
>> drivers/accel/ivpu/ivpu_mmu.c | 2 +-
>> drivers/accel/ivpu/ivpu_pm.c | 3 ++-
>> 5 files changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/accel/ivpu/ivpu_hw_btrs.c b/drivers/accel/ivpu/ivpu_hw_btrs.c
>> index afdb3b2aa72a..27a345f3befe 100644
>> --- a/drivers/accel/ivpu/ivpu_hw_btrs.c
>> +++ b/drivers/accel/ivpu/ivpu_hw_btrs.c
>> @@ -673,7 +673,7 @@ bool ivpu_hw_btrs_irq_handler_lnl(struct ivpu_device *vdev, int irq)
>>
>> if (REG_TEST_FLD(VPU_HW_BTRS_LNL_INTERRUPT_STAT, SURV_ERR, status)) {
>> ivpu_dbg(vdev, IRQ, "Survivability IRQ\n");
>> - queue_work(system_wq, &vdev->irq_dct_work);
>> + queue_work(system_percpu_wq, &vdev->irq_dct_work);
>> }
>>
>> if (REG_TEST_FLD(VPU_HW_BTRS_LNL_INTERRUPT_STAT, FREQ_CHANGE, status)) {
>> diff --git a/drivers/accel/ivpu/ivpu_ipc.c b/drivers/accel/ivpu/ivpu_ipc.c
>> index 5f00809d448a..1f13bf95b2b3 100644
>> --- a/drivers/accel/ivpu/ivpu_ipc.c
>> +++ b/drivers/accel/ivpu/ivpu_ipc.c
>> @@ -459,7 +459,7 @@ void ivpu_ipc_irq_handler(struct ivpu_device *vdev)
>> }
>> }
>>
>> - queue_work(system_wq, &vdev->irq_ipc_work);
>> + queue_work(system_percpu_wq, &vdev->irq_ipc_work);
>> }
>>
>> void ivpu_ipc_irq_work_fn(struct work_struct *work)
>> diff --git a/drivers/accel/ivpu/ivpu_job.c b/drivers/accel/ivpu/ivpu_job.c
>> index 060f1fc031d3..7a1f78b84b09 100644
>> --- a/drivers/accel/ivpu/ivpu_job.c
>> +++ b/drivers/accel/ivpu/ivpu_job.c
>> @@ -574,7 +574,7 @@ static int ivpu_job_signal_and_destroy(struct ivpu_device *vdev, u32 job_id, u32
>> * status and ensure both are handled in the same way
>> */
>> job->file_priv->has_mmu_faults = true;
>> - queue_work(system_wq, &vdev->context_abort_work);
>> + queue_work(system_percpu_wq, &vdev->context_abort_work);
>> return 0;
>> }
>>
>> diff --git a/drivers/accel/ivpu/ivpu_mmu.c b/drivers/accel/ivpu/ivpu_mmu.c
>> index 5ea010568faa..e1baf6b64935 100644
>> --- a/drivers/accel/ivpu/ivpu_mmu.c
>> +++ b/drivers/accel/ivpu/ivpu_mmu.c
>> @@ -970,7 +970,7 @@ void ivpu_mmu_irq_evtq_handler(struct ivpu_device *vdev)
>> }
>> }
>>
>> - queue_work(system_wq, &vdev->context_abort_work);
>> + queue_work(system_percpu_wq, &vdev->context_abort_work);
>> }
>>
>> void ivpu_mmu_evtq_dump(struct ivpu_device *vdev)
>> diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c
>> index ffa2ba7cafe2..9ecba05ce7db 100644
>> --- a/drivers/accel/ivpu/ivpu_pm.c
>> +++ b/drivers/accel/ivpu/ivpu_pm.c
>> @@ -226,7 +226,8 @@ void ivpu_start_job_timeout_detection(struct ivpu_device *vdev)
>> unsigned long timeout_ms = ivpu_tdr_timeout_ms ? ivpu_tdr_timeout_ms : vdev->timeout.tdr;
>>
>> /* No-op if already queued */
>> - queue_delayed_work(system_wq, &vdev->pm->job_timeout_work, msecs_to_jiffies(timeout_ms));
>> + queue_delayed_work(system_percpu_wq, &vdev->pm->job_timeout_work,
>> + msecs_to_jiffies(timeout_ms));
>> }
>>
>> void ivpu_stop_job_timeout_detection(struct ivpu_device *vdev)
> Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Pushed to drm-misc-next.
-Karol
next prev parent reply other threads:[~2025-10-30 7:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-29 16:56 [PATCH v2 0/2] replace system_unbound_wq and system_wq with the new wqs Marco Crivellari
2025-10-29 16:56 ` [PATCH v2 1/2] accel/ivpu: replace use of system_unbound_wq with system_dfl_wq Marco Crivellari
2025-10-29 20:01 ` Karol Wachowski
2025-10-30 7:46 ` Karol Wachowski
2025-10-29 16:56 ` [PATCH v2 2/2] accel/ivpu: replace use of system_wq with system_percpu_wq Marco Crivellari
2025-10-29 20:02 ` Karol Wachowski
2025-10-30 7:46 ` Karol Wachowski [this message]
2025-10-30 8:37 ` Marco Crivellari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6cfbb32b-7866-4fcc-98a3-1ded4558d43f@linux.intel.com \
--to=karol.wachowski@linux.intel.com \
--cc=bigeasy@linutronix.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=frederic@kernel.org \
--cc=jiangshanlai@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.falkowski@linux.intel.com \
--cc=marco.crivellari@suse.com \
--cc=mhocko@suse.com \
--cc=ogabbay@kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox