From: Nick Kossifidis <mick@ics.forth.gr>
To: Palmer Dabbelt <palmer@dabbelt.com>
Cc: zong.li@sifive.com, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org,
Paul Walmsley <paul.walmsley@sifive.com>
Subject: Re: [PATCH 1/2] riscv: Register System RAM as iomem resources
Date: Fri, 10 Jul 2020 05:05:30 +0300 [thread overview]
Message-ID: <6d5006efde7affcb3307f5dcb85af7aa@mailhost.ics.forth.gr> (raw)
In-Reply-To: <mhng-cd7e19bb-859a-45a4-90e8-7851c4fb3083@palmerdabbelt-glaptop1>
Στις 2020-07-09 21:27, Palmer Dabbelt έγραψε:
> On Tue, 16 Jun 2020 00:45:46 PDT (-0700), zong.li@sifive.com wrote:
>> Add System RAM to /proc/iomem, various tools expect it such as kdump.
>> It is also needed for page_is_ram API which checks the specified
>> address
>> whether registered as System RAM in iomem_resource list.
>>
>> Signed-off-by: Zong Li <zong.li@sifive.com>
>> ---
>> arch/riscv/mm/init.c | 22 ++++++++++++++++++++++
>> 1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>> index f4adb3684f3d..bbe816e03b2f 100644
>> --- a/arch/riscv/mm/init.c
>> +++ b/arch/riscv/mm/init.c
>> @@ -517,6 +517,27 @@ void mark_rodata_ro(void)
>> }
>> #endif
>>
>> +void __init resource_init(void)
>> +{
>> + struct memblock_region *region;
>> +
>> + for_each_memblock(memory, region) {
>> + struct resource *res;
>> +
>> + res = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
>> + if (!res)
>> + panic("%s: Failed to allocate %zu bytes\n", __func__,
>> + sizeof(struct resource));
>> +
>> + res->name = "System RAM";
>> + res->start =
>> __pfn_to_phys(memblock_region_memory_base_pfn(region));
>> + res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) -
>> 1;
>> + res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
>
> Looks like everyone else is checking MEMBLOCK_NOMAP before registering
> memory
> regions. I've added that and put this on for-next. Thanks!
>
> commit 11dc632bf515874c84887727614e8044452f1f28
> gpg: Signature made Thu 09 Jul 2020 11:24:08 AM PDT
> gpg: using RSA key
> 2B3C3747446843B24A943A7A2E1319F35FBB1889
> gpg: issuer "palmer@dabbelt.com"
> gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
> [ultimate]
> gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>"
> [ultimate]
> Author: Zong Li <zong.li@sifive.com>
> Date: Tue Jun 16 15:45:46 2020 +0800
>
> riscv: Register System RAM as iomem resources
> Add System RAM to /proc/iomem, various tools expect it such as
> kdump.
> It is also needed for page_is_ram API which checks the specified
> address
> whether registered as System RAM in iomem_resource list.
> Signed-off-by: Zong Li <zong.li@sifive.com>
> [Palmer: check MEMBLOCK_NOMAP]
> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
>
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index f4adb3684f3d..8b78fd23713e 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -517,6 +517,32 @@ void mark_rodata_ro(void)
> }
> #endif
>
> +void __init resource_init(void)
> +{
> + struct memblock_region *region;
> +
> + for_each_memblock(memory, region) {
> + struct resource *res;
> +
> + res = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
> + if (!res)
> + panic("%s: Failed to allocate %zu bytes\n", __func__,
> + sizeof(struct resource));
> +
> + if (memblock_is_nomap(region) {
> + res->name = "reserved";
> + res->flags = IORESOURCE_MEM;
> + } else {
> + res->name = "System RAM";
> + res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
> + }
> + res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
> + res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) -
> 1;
> +
> + request_resource(&iomem_resource, res);
> + }
> +}
> +
> void __init paging_init(void)
> {
> setup_vm_final();
> @@ -524,6 +550,7 @@ void __init paging_init(void)
> sparse_init();
> setup_zero_page();
> zone_sizes_init();
> + resource_init();
> }
>
> #ifdef CONFIG_SPARSEMEM_VMEMMAP
>
>
>> +
>> + request_resource(&iomem_resource, res);
>> + }
>> +}
>> +
>> void __init paging_init(void)
>> {
>> setup_vm_final();
>> @@ -524,6 +545,7 @@ void __init paging_init(void)
>> sparse_init();
>> setup_zero_page();
>> zone_sizes_init();
>> + resource_init();
>> }
>>
>> #ifdef CONFIG_SPARSEMEM_VMEMMAP
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Zong Li sent a newer version of this series without this patch, since
I'm handling this on the kexec/kdump series as well where other sections
needed for kdump are also registered.
next prev parent reply other threads:[~2020-07-10 2:06 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-16 7:45 [PATCH 0/2] Add STRICT_DEVMEM support on RISC-V Zong Li
2020-06-16 7:45 ` [PATCH 1/2] riscv: Register System RAM as iomem resources Zong Li
2020-06-16 11:51 ` Nick Kossifidis
2020-06-17 1:23 ` Zong Li
2020-07-09 18:27 ` Palmer Dabbelt
2020-07-10 2:05 ` Nick Kossifidis [this message]
2020-06-16 7:45 ` [PATCH 2/2] riscv: Support CONFIG_STRICT_DEVMEM Zong Li
2020-06-16 12:27 ` Nick Kossifidis
2020-06-17 1:56 ` Zong Li
2020-06-17 5:28 ` Nick Kossifidis
2020-06-17 6:32 ` Zong Li
2020-07-09 20:08 ` Palmer Dabbelt
2020-07-10 2:43 ` Zong Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6d5006efde7affcb3307f5dcb85af7aa@mailhost.ics.forth.gr \
--to=mick@ics.forth.gr \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=zong.li@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox