From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Stefan Binding <sbinding@opensource.cirrus.com>,
Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
patches@opensource.cirrus.com,
Richard Fitzgerald <rf@opensource.cirrus.com>
Subject: Re: [PATCH v2 3/8] ASoC: cs42l42: Ensure MCLKint is a multiple of the sample rate
Date: Wed, 18 Jan 2023 10:46:59 -0600 [thread overview]
Message-ID: <6fa372b6-f8e7-aaf8-dee4-bc0dde2cb931@linux.intel.com> (raw)
In-Reply-To: <20230118160452.2385494-4-sbinding@opensource.cirrus.com>
On 1/18/23 10:04, Stefan Binding wrote:
> From: Richard Fitzgerald <rf@opensource.cirrus.com>
>
> The chosen clocking configuration must give an internal MCLK (MCLKint)
> that is an integer multiple of the sample rate.
>
> On I2S each of the supported bit clock frequencies can only be generated
> from one sample rate group (either the 44100 or the 48000) so the code
> could use only the bitclock to look up a PLL config.
>
> The relationship between sample rate and bitclock frequency is more
> complex on Soundwire and so it is possible to set a frame shape to
> generate a bitclock from the "wrong" group. For example 2*147 with a
> 48000 sample rate would give a bitclock of 14112000 which on I2S
> could only be derived from a 44100 sample rate.
The explanation is a bit convoluted, clearly the 147-row configuration
was only meant to be used with 44100 kHz. I don't think 48kHz can be
supported without using the source- or sink-controlled async modes.
This is still a valid change so:
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> ---
> sound/soc/codecs/cs42l42.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
> index 82aa11d6937be..939f8bcc222c0 100644
> --- a/sound/soc/codecs/cs42l42.c
> +++ b/sound/soc/codecs/cs42l42.c
> @@ -653,7 +653,8 @@ static const struct cs42l42_pll_params pll_ratio_table[] = {
> { 24576000, 1, 0x03, 0x40, 0x000000, 0x03, 0x10, 12288000, 128, 1}
> };
>
> -static int cs42l42_pll_config(struct snd_soc_component *component, unsigned int clk)
> +static int cs42l42_pll_config(struct snd_soc_component *component, unsigned int clk,
> + unsigned int sample_rate)
> {
> struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
> int i;
> @@ -668,6 +669,10 @@ static int cs42l42_pll_config(struct snd_soc_component *component, unsigned int
> }
>
> for (i = 0; i < ARRAY_SIZE(pll_ratio_table); i++) {
> + /* MCLKint must be a multiple of the sample rate */
> + if (pll_ratio_table[i].mclk_int % sample_rate)
> + continue;
> +
> if (pll_ratio_table[i].sclk == clk) {
> cs42l42->pll_config = i;
>
> @@ -893,6 +898,7 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
> struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
> unsigned int channels = params_channels(params);
> unsigned int width = (params_width(params) / 8) - 1;
> + unsigned int sample_rate = params_rate(params);
> unsigned int slot_width = 0;
> unsigned int val = 0;
> unsigned int bclk;
> @@ -956,11 +962,11 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
> break;
> }
>
> - ret = cs42l42_pll_config(component, bclk);
> + ret = cs42l42_pll_config(component, bclk, sample_rate);
> if (ret)
> return ret;
>
> - cs42l42_src_config(component, params_rate(params));
> + cs42l42_src_config(component, sample_rate);
>
> return 0;
> }
next prev parent reply other threads:[~2023-01-18 18:38 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-18 16:04 [PATCH v2 0/8] ASoC: cs42l42: Add Soundwire support Stefan Binding
2023-01-18 16:04 ` [PATCH v2 1/8] soundwire: stream: Add specific prep/deprep commands to port_prep callback Stefan Binding
2023-01-18 16:37 ` Pierre-Louis Bossart
2023-01-18 16:04 ` [PATCH v2 2/8] ASoC: cs42l42: Add SOFT_RESET_REBOOT register Stefan Binding
2023-01-18 16:41 ` Pierre-Louis Bossart
2023-01-19 13:33 ` Richard Fitzgerald
2023-01-18 16:04 ` [PATCH v2 3/8] ASoC: cs42l42: Ensure MCLKint is a multiple of the sample rate Stefan Binding
2023-01-18 16:46 ` Pierre-Louis Bossart [this message]
2023-01-18 16:04 ` [PATCH v2 4/8] ASoC: cs42l42: Separate ASP config from PLL config Stefan Binding
2023-01-18 16:04 ` [PATCH v2 5/8] ASoC: cs42l42: Export some functions for Soundwire Stefan Binding
2023-01-18 16:04 ` [PATCH v2 6/8] ASoC: cs42l42: Add Soundwire support Stefan Binding
2023-01-18 17:41 ` Pierre-Louis Bossart
2023-01-19 13:58 ` Richard Fitzgerald
2023-01-19 14:48 ` Pierre-Louis Bossart
2023-01-19 15:35 ` Richard Fitzgerald
2023-01-19 16:27 ` Pierre-Louis Bossart
2023-01-20 12:31 ` Richard Fitzgerald
2023-01-20 19:55 ` Pierre-Louis Bossart
2023-01-23 15:51 ` Richard Fitzgerald
2023-01-23 16:05 ` Pierre-Louis Bossart
2023-01-23 16:14 ` Richard Fitzgerald
2023-01-23 16:25 ` Pierre-Louis Bossart
2023-01-18 16:04 ` [PATCH v2 7/8] ASoC: cs42l42: Don't set idle_bias_on Stefan Binding
2023-01-18 16:04 ` [PATCH v2 8/8] ASoC: cs42l42: Wait for debounce interval after resume Stefan Binding
2023-01-18 17:43 ` [PATCH v2 0/8] ASoC: cs42l42: Add Soundwire support Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6fa372b6-f8e7-aaf8-dee4-bc0dde2cb931@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=rf@opensource.cirrus.com \
--cc=sbinding@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox