[PATCH 5/7] pinctrl: rockchip: rename RK1108 to RV1108

Andy Yan
2017-02-13T11:08:13Z

Rockchip finally named the SOC as RV1108, so change it.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

drivers/pinctrl/pinctrl-rockchip.c | 76 +++++++++++++++++++-------------------
1 file changed, 38 insertions(+), 38 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 08765f5..d7f1f9a 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -59,7 +59,7 @@
#define GPIO_LS_SYNC 0x60

enum rockchip_pinctrl_type {
- RK1108,
+ RV1108,
RK2928,
RK3066B,
RK3188,
@@ -625,13 +625,13 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
return ret;
}

-#define RK1108_PULL_PMU_OFFSET 0x10
-#define RK1108_PULL_OFFSET 0x110
-#define RK1108_PULL_PINS_PER_REG 8
-#define RK1108_PULL_BITS_PER_PIN 2
-#define RK1108_PULL_BANK_STRIDE 16
+#define RV1108_PULL_PMU_OFFSET 0x10
+#define RV1108_PULL_OFFSET 0x110
+#define RV1108_PULL_PINS_PER_REG 8
+#define RV1108_PULL_BITS_PER_PIN 2
+#define RV1108_PULL_BANK_STRIDE 16

-static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+static void rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
@@ -640,27 +640,27 @@ static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
- *reg = RK1108_PULL_PMU_OFFSET;
+ *reg = RV1108_PULL_PMU_OFFSET;
} else {
- *reg = RK1108_PULL_OFFSET;
+ *reg = RV1108_PULL_OFFSET;
*regmap = info->regmap_base;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
- *reg += bank->bank_num * RK1108_PULL_BANK_STRIDE;
+ *reg += bank->bank_num * RV1108_PULL_BANK_STRIDE;
}

- *reg += ((pin_num / RK1108_PULL_PINS_PER_REG) * 4);
- *bit = (pin_num % RK1108_PULL_PINS_PER_REG);
- *bit *= RK1108_PULL_BITS_PER_PIN;
+ *reg += ((pin_num / RV1108_PULL_PINS_PER_REG) * 4);
+ *bit = (pin_num % RV1108_PULL_PINS_PER_REG);
+ *bit *= RV1108_PULL_BITS_PER_PIN;
}

-#define RK1108_DRV_PMU_OFFSET 0x20
-#define RK1108_DRV_GRF_OFFSET 0x210
-#define RK1108_DRV_BITS_PER_PIN 2
-#define RK1108_DRV_PINS_PER_REG 8
-#define RK1108_DRV_BANK_STRIDE 16
+#define RV1108_DRV_PMU_OFFSET 0x20
+#define RV1108_DRV_GRF_OFFSET 0x210
+#define RV1108_DRV_BITS_PER_PIN 2
+#define RV1108_DRV_PINS_PER_REG 8
+#define RV1108_DRV_BANK_STRIDE 16

-static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+static void rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
@@ -669,19 +669,19 @@ static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
- *reg = RK1108_DRV_PMU_OFFSET;
+ *reg = RV1108_DRV_PMU_OFFSET;
} else {
*regmap = info->regmap_base;
- *reg = RK1108_DRV_GRF_OFFSET;
+ *reg = RV1108_DRV_GRF_OFFSET;

/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
- *reg += bank->bank_num * RK1108_DRV_BANK_STRIDE;
+ *reg += bank->bank_num * RV1108_DRV_BANK_STRIDE;
}

- *reg += ((pin_num / RK1108_DRV_PINS_PER_REG) * 4);
- *bit = pin_num % RK1108_DRV_PINS_PER_REG;
- *bit *= RK1108_DRV_BITS_PER_PIN;
+ *reg += ((pin_num / RV1108_DRV_PINS_PER_REG) * 4);
+ *bit = pin_num % RV1108_DRV_PINS_PER_REG;
+ *bit *= RV1108_DRV_BITS_PER_PIN;
}

#define RK2928_PULL_OFFSET 0x118
@@ -1183,7 +1183,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
return !(data & BIT(bit))
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
: PIN_CONFIG_BIAS_DISABLE;
- case RK1108:
+ case RV1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1230,7 +1230,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,

spin_unlock_irqrestore(&bank->slock, flags);
break;
- case RK1108:
+ case RV1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1420,7 +1420,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
pull == PIN_CONFIG_BIAS_DISABLE);
case RK3066B:
return pull ? false : true;
- case RK1108:
+ case RV1108:
case RK3188:
case RK3288:
case RK3368:
@@ -2518,7 +2518,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
return 0;
}

-static struct rockchip_pin_bank rk1108_pin_banks[] = {
+static struct rockchip_pin_bank rv1108_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
@@ -2528,15 +2528,15 @@ static struct rockchip_pin_bank rk1108_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
};

-static struct rockchip_pin_ctrl rk1108_pin_ctrl = {
- .pin_banks = rk1108_pin_banks,
- .nr_banks = ARRAY_SIZE(rk1108_pin_banks),
- .label = "RK1108-GPIO",
- .type = RK1108,
+static struct rockchip_pin_ctrl rv1108_pin_ctrl = {
+ .pin_banks = rv1108_pin_banks,
+ .nr_banks = ARRAY_SIZE(rv1108_pin_banks),
+ .label = "RV1108-GPIO",
+ .type = RV1108,
.grf_mux_offset = 0x10,
.pmu_mux_offset = 0x0,
- .pull_calc_reg = rk1108_calc_pull_reg_and_bit,
- .drv_calc_reg = rk1108_calc_drv_reg_and_bit,
+ .pull_calc_reg = rv1108_calc_pull_reg_and_bit,
+ .drv_calc_reg = rv1108_calc_drv_reg_and_bit,
};

static struct rockchip_pin_bank rk2928_pin_banks[] = {
@@ -2768,8 +2768,8 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
};

static const struct of_device_id rockchip_pinctrl_dt_match[] = {
- { .compatible = "rockchip,rk1108-pinctrl",
- .data = (void *)&rk1108_pin_ctrl },
+ { .compatible = "rockchip,rv1108-pinctrl",
+ .data = (void *)&rv1108_pin_ctrl },
{ .compatible = "rockchip,rk2928-pinctrl",
.data = (void *)&rk2928_pin_ctrl },
{ .compatible = "rockchip,rk3036-pinctrl",
--
2.7.4