From: Hans de Goede <hdegoede@redhat.com>
To: Kane Chen <kane.chen@intel.com>,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org,
ilpo.jarvinen@linux.intel.com
Subject: Re: [PATCH 1/1] platform/x86/intel/pmc: Show live substate requirements
Date: Mon, 12 Aug 2024 15:49:30 +0200 [thread overview]
Message-ID: <7225c299-6086-499a-8dfd-cbc5a8fcc7b6@redhat.com> (raw)
In-Reply-To: <20240719122807.3853292-1-kane.chen@intel.com>
Hi,
On 7/19/24 2:28 PM, Kane Chen wrote:
> While debugging runtime s0ix, we do need to check which required IPs
> are not power gated. This patch adds code to show live substate status
> vs requirements in sys/kernel/debug/pmc_core/substate_requirements to
> help runtime s0ix debug.
>
> Signed-off-by: Kane Chen <kane.chen@intel.com>
Thank you for your patch, I've applied this patch to my review-hans
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.
Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.
Regards,
Hans
> ---
> drivers/platform/x86/intel/pmc/core.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c
> index 2ad2f8753e5d4..b93ecc5169745 100644
> --- a/drivers/platform/x86/intel/pmc/core.c
> +++ b/drivers/platform/x86/intel/pmc/core.c
> @@ -791,13 +791,15 @@ static void pmc_core_substate_req_header_show(struct seq_file *s, int pmc_index)
> pmc_for_each_mode(i, mode, pmcdev)
> seq_printf(s, " %9s |", pmc_lpm_modes[mode]);
>
> - seq_printf(s, " %9s |\n", "Status");
> + seq_printf(s, " %9s |", "Status");
> + seq_printf(s, " %11s |\n", "Live Status");
> }
>
> static int pmc_core_substate_req_regs_show(struct seq_file *s, void *unused)
> {
> struct pmc_dev *pmcdev = s->private;
> u32 sts_offset;
> + u32 sts_offset_live;
> u32 *lpm_req_regs;
> int num_maps, mp, pmc_index;
>
> @@ -811,6 +813,7 @@ static int pmc_core_substate_req_regs_show(struct seq_file *s, void *unused)
> maps = pmc->map->lpm_sts;
> num_maps = pmc->map->lpm_num_maps;
> sts_offset = pmc->map->lpm_status_offset;
> + sts_offset_live = pmc->map->lpm_live_status_offset;
> lpm_req_regs = pmc->lpm_req_regs;
>
> /*
> @@ -828,6 +831,7 @@ static int pmc_core_substate_req_regs_show(struct seq_file *s, void *unused)
> for (mp = 0; mp < num_maps; mp++) {
> u32 req_mask = 0;
> u32 lpm_status;
> + u32 lpm_status_live;
> const struct pmc_bit_map *map;
> int mode, idx, i, len = 32;
>
> @@ -842,6 +846,9 @@ static int pmc_core_substate_req_regs_show(struct seq_file *s, void *unused)
> /* Get the last latched status for this map */
> lpm_status = pmc_core_reg_read(pmc, sts_offset + (mp * 4));
>
> + /* Get the runtime status for this map */
> + lpm_status_live = pmc_core_reg_read(pmc, sts_offset_live + (mp * 4));
> +
> /* Loop over elements in this map */
> map = maps[mp];
> for (i = 0; map[i].name && i < len; i++) {
> @@ -868,6 +875,9 @@ static int pmc_core_substate_req_regs_show(struct seq_file *s, void *unused)
> /* In Status column, show the last captured state of this agent */
> seq_printf(s, " %9s |", lpm_status & bit_mask ? "Yes" : " ");
>
> + /* In Live status column, show the live state of this agent */
> + seq_printf(s, " %11s |", lpm_status_live & bit_mask ? "Yes" : " ");
> +
> seq_puts(s, "\n");
> }
> }
prev parent reply other threads:[~2024-08-12 13:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-19 12:28 [PATCH 1/1] platform/x86/intel/pmc: Show live substate requirements Kane Chen
2024-07-29 11:38 ` Ilpo Järvinen
2024-08-12 13:49 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7225c299-6086-499a-8dfd-cbc5a8fcc7b6@redhat.com \
--to=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=kane.chen@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox