Re: [PATCH v2 15/15] arm64: dts: allwinner: h616: add NAND controller

[Richard GENOUD <richard.genoud@bootlin.com>]

Le 13/10/2025 à 17:43, Jernej Škrabec a écrit :
> Dne ponedeljek, 13. oktober 2025 ob 17:26:45 Srednjeevropski poletni čas je Richard Genoud napisal(a):
>> The H616 has a NAND controller quite similar to the A10/A23 ones, but
>> with some register differences, more clocks (for ECC and MBUS), more ECC
>> strengths, so this requires a new compatible string.
>>
>> Add the NAND controller node and pins in the device tree.
>>
>> Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
>> ---
>>   .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 51 +++++++++++++++++++
>>   1 file changed, 51 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>> index ceedae9e399b..bb53c6c63836 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>> @@ -304,6 +304,42 @@ mmc2_pins: mmc2-pins {
>>   				bias-pull-up;
>>   			};
>>   
>> +			/omit-if-no-ref/
>> +			nand_pins: nand-pins {
>> +				pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9",
>> +				       "PC10", "PC11", "PC12", "PC13", "PC14",
>> +				       "PC15", "PC16";
>> +				function = "nand0";
>> +			};
>> +
>> +			/omit-if-no-ref/
>> +			nand_cs0_pin: nand-cs0-pin {
>> +				pins = "PC4";
>> +				function = "nand0";
>> +				bias-pull-up;
>> +			};
>> +
>> +			/omit-if-no-ref/
>> +			nand_cs1_pin: nand-cs1-pin {
>> +				pins = "PC3";
>> +				function = "nand0";
>> +				bias-pull-up;
>> +			};
>> +
>> +			/omit-if-no-ref/
>> +			nand_rb0_pin: nand-rb0-pin {
>> +				pins = "PC6";
>> +				function = "nand0";
>> +				bias-pull-up;
>> +			};
>> +
>> +			/omit-if-no-ref/
>> +			nand_rb1_pin: nand-rb1-pin {
>> +				pins = "PC7";
>> +				function = "nand0";
>> +				bias-pull-up;
>> +			};
>> +
>>   			/omit-if-no-ref/
>>   			spi0_pins: spi0-pins {
>>   				pins = "PC0", "PC2", "PC4";
>> @@ -377,6 +413,21 @@ iommu: iommu@30f0000 {
>>   			#iommu-cells = <1>;
>>   		};
>>   
>> +		nfc: nand-controller@4011000 {
>> +			compatible = "allwinner,sun50i-h616-nand-controller";
>> +			reg = <0x04011000 0x1000>;
>> +			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND0>,
>> +				<&ccu CLK_NAND1>, <&ccu CLK_MBUS_NAND>;
>> +			clock-names = "ahb", "mod", "ecc", "mbus";
>> +			resets = <&ccu RST_BUS_NAND>;
>> +			reset-names = "ahb";
>> +			dmas = <&dma 10>;
>> +			dma-names = "rxtx";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +		};
> 
> Sorry, forgot to mention. This should be marked as disabled, as most of
> the boards don't have NAND connected.
arg! of course, I forgot that.

Thanks!

> 
> Best regards,
> Jernej
> 
>> +
>>   		mmc0: mmc@4020000 {
>>   			compatible = "allwinner,sun50i-h616-mmc",
>>   				     "allwinner,sun50i-a100-mmc";
>>
> 
> 
> 
> 


-- 
Richard Genoud, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com