From: "Pali Rohár" <pali.rohar@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Anton Vorontsov <cbouatmailru@gmail.com>,
linux-kernel@vger.kernel.org,
syed rafiuddin <rafiuddin.sayed@gmail.com>,
Rodolfo Giometti <giometti@linux.it>,
David Woodhouse <dwmw2@infradead.org>,
Sebastian Reichel <sre@debian.org>
Subject: Re: [PATCH] rx51: add bq27200 i2c board info
Date: Sat, 17 Dec 2011 10:55:15 +0100 [thread overview]
Message-ID: <7700705.IODZRCEMlU@pali-elitebook> (raw)
In-Reply-To: <20111207202546.GJ31337@atomide.com>
[-- Attachment #1: Type: text/plain, Size: 1967 bytes --]
On Wednesday 07 December 2011 12:25:47 you wrote:
> * Anton Vorontsov <cbouatmailru@gmail.com> [111125 14:28]:
> > Cc'ing Tony Lindgren.
> >
> > Tony, OK to pass this via battery git tree?
>
> Sorry for the delay, yes that's fine with me:
>
> Acked-by: Tony Lindgren <tony@atomide.com>
Anton Vorontsov, can you now include this patch into battery tree?
>
> > p.s. Though, not sure if we really should bother w/ these #ifs.
>
> Up to you, looks like they could be left out.
Now I see that these #ifs is not needed.
>
> > On Fri, Nov 25, 2011 at 11:53:06PM +0100, Pali Rohár wrote:
> > > I forgot to send patch which enable bq27x00_battery driver on Nokia N900
RX51. Here is:
> > > >From c06d00aa9d394ab5b65bbd5361c6da8424afbfe5 Mon Sep 17 00:00:00
> > > >2001
> > >
> > > From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali.rohar@gmail.com>
> > > Date: Fri, 25 Nov 2011 23:42:54 +0100
> > > Subject: [PATCH] rx51: add bq27200 i2c board info
> > >
> > > ---
> > >
> > > arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++++
> > > 1 files changed, 5 insertions(+), 0 deletions(-)
> > >
> > > diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
> > > b/arch/arm/mach-omap2/board-rx51-peripherals.c index
> > > 5a886cd..23c626e 100644
> > > --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> > > +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> > > @@ -940,6 +940,11 @@ static struct i2c_board_info __initdata
> > > rx51_peripherals_i2c_board_info_2[] = {> >
> > > .platform_data = &rx51_lp5523_platform_data,
> > >
> > > },
> > >
> > > #endif
> > >
> > > +#if defined(CONFIG_BATTERY_BQ27X00_I2C) ||
> > > defined(CONFIG_BATTERY_BQ27X00_I2C_MODULE) + {
> > > + I2C_BOARD_INFO("bq27200", 0x55),
> > > + },
> > > +#endif
> > >
> > > {
> > >
> > > I2C_BOARD_INFO("tpa6130a2", 0x60),
> > > .platform_data = &rx51_tpa6130a2_data,
--
Pali Rohár
pali.rohar@gmail.com
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2011-12-17 9:55 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-20 15:18 [PATCH 1/7] bq27x00: Do not cache current_now value for bq27000 batery Pali Rohár
2011-09-20 15:18 ` [PATCH 2/7] bq27x00: Add support for property POWER_SUPPLY_PROP_CAPACITY_LEVEL Pali Rohár
2011-09-20 15:18 ` [PATCH 3/7] bq27x00: Report -ENODATA if bq27000 battery was not calibrated Pali Rohár
2011-09-20 15:18 ` [PATCH 4/7] bq27x00: Cache energy property Pali Rohár
2011-09-20 15:18 ` [PATCH 5/7] bq27x00: Cache temperature value in converted unit Pali Rohár
2011-09-20 15:18 ` [PATCH 6/7] bq27x00: Fix reporting status value for bq27500 battery Pali Rohár
2011-09-20 15:18 ` [PATCH 7/7] bq27x00: Fix reporting error messages Pali Rohár
2011-11-01 0:43 ` [PATCH 1/9] bq27x00: Do not cache current_now value for bq27000 batery Pali Rohár
2011-11-01 0:43 ` [PATCH 2/9] bq27x00: Add support for property POWER_SUPPLY_PROP_CAPACITY_LEVEL Pali Rohár
2011-11-01 0:43 ` [PATCH 3/9] bq27x00: Report -ENODATA if bq27000 battery was not calibrated Pali Rohár
2011-11-01 0:43 ` [PATCH 4/9] bq27x00: Cache energy property Pali Rohár
2011-11-01 0:43 ` [PATCH 5/9] bq27x00: Cache temperature value in converted unit Pali Rohár
2011-11-01 0:43 ` [PATCH 6/9] bq27x00: Fix reporting status value for bq27500 battery Pali Rohár
2011-11-01 0:43 ` [PATCH 7/9] bq27x00: Fix reporting error messages Pali Rohár
2011-11-01 0:43 ` [PATCH 8/9] bq27x00: Add miscdevice for each battery with ioctl for reading registers Pali Rohár
2011-11-01 12:09 ` Lars-Peter Clausen
2011-11-01 12:23 ` Pali Rohár
2011-11-01 12:46 ` Lars-Peter Clausen
2011-11-01 12:53 ` Pali Rohár
2011-11-25 20:10 ` Anton Vorontsov
2011-11-25 20:30 ` Pali Rohár
2011-11-25 20:46 ` Anton Vorontsov
2011-11-25 20:54 ` Pali Rohár
2011-11-25 22:04 ` Anton Vorontsov
2011-11-25 22:48 ` Pali Rohár
2011-11-27 11:54 ` Mark Brown
2011-12-05 19:37 ` Pali Rohár
2011-12-05 19:40 ` Mark Brown
2011-11-01 0:43 ` [PATCH 9/9] bq27x00: Fix OOPS caused by unregistring bq27x00 driver Pali Rohár
2011-11-13 20:54 ` Pali Rohár
2011-11-25 22:53 ` [PATCH] rx51: add bq27200 i2c board info Pali Rohár
2011-11-25 23:03 ` Anton Vorontsov
2011-12-05 19:24 ` Felipe Contreras
2011-12-06 15:49 ` Pali Rohár
2011-12-07 20:25 ` Tony Lindgren
2011-12-17 9:55 ` Pali Rohár [this message]
2012-01-06 1:41 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7700705.IODZRCEMlU@pali-elitebook \
--to=pali.rohar@gmail.com \
--cc=cbouatmailru@gmail.com \
--cc=dwmw2@infradead.org \
--cc=giometti@linux.it \
--cc=linux-kernel@vger.kernel.org \
--cc=rafiuddin.sayed@gmail.com \
--cc=sre@debian.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox