From: Yurii Strilets <yurastr100@gmail.com>
To: Armin Wolf <W_Armin@gmx.de>
Cc: platform-driver-x86@vger.kernel.org, regressions@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: Re: [REGRESSION][BISECTED] asus-wmi driver fails on my laptop
Date: Fri, 6 Dec 2024 23:18:36 +0200 (GMT+02:00) [thread overview]
Message-ID: <78eb0efb-bbaf-4cba-840a-9aa507798075@gmail.com> (raw)
In-Reply-To: <bf3b9efd-6700-485a-bd0e-f81de1e11fcf@gmx.de>
Thank you very much for the fix!
I am terribly sorry about a faulty report, I did just find out I had an issue during the mainline build.
Dec 6, 2024 20:15:05 Armin Wolf <W_Armin@gmx.de>:
> Am 06.12.24 um 14:33 schrieb Yura Strilets:
>
>> Hello,
>>
>> After upgrading from 6.11 to 6.12 a bunch of Fn+Fx buttons(touchpad,
>> mic, kb backlight, my asus) stopped working and the
>> /sys/(...)/asus::kbd_backlight interface is missing, which,
>> considering the dmesg, looks like an asus-wmi driver issue.
>>
>> I've been able to bisect the issue to the commit
>> [b012170fed282151f7ba8988a347670c299f5ab3] "platform/x86: asus-wmi:
>> Fix thermal profile initialization"
>>
>> Additionally, here's some maybe-helpful information:
>> my laptop's model -- ASUS Zenbook UX3402VA
>> linux distro -- Arch Linux
>> .config for bisection -- was taken from /proc/config.gz at 6.12.1 arch
>> kernel(attached in [1]) and missing options are default
>> dmesg logs -- The "grep asus" parts of both good and bad scenarios can
>> be seen below and full logs are at [2] and [3]
>>
>> == bad.log ==
>> [ 3.664546] asus_wmi: ASUS WMI generic driver loaded
>> [ 3.713358] asus_wmi: Initialization: 0x1
>> [ 3.714126] asus_wmi: SFUN value: 0x21
>> [ 3.714131] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use
>> DSTS
>> [ 3.757420] asus_wmi: Failed to set throttle thermal policy
>> (retval): 0x0
>> [ 3.757425] asus_wmi: Failed to set default thermal profile
>> [ 3.757429] asus-nb-wmi asus-nb-wmi: probe with driver asus-nb-wmi
>> failed with error -5
>> == end ==
>>
>> == good.log ==
>> [ 4.557898] asus_wmi: ASUS WMI generic driver loaded
>> [ 4.776587] asus_wmi: Initialization: 0x1
>> [ 4.777253] asus_wmi: SFUN value: 0x21
>> [ 4.777256] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use
>> DSTS
>> [ 4.777258] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
>> [ 4.805497] input: Asus WMI hotkeys as
>> /devices/platform/asus-nb-wmi/input/input15
>> == end ==
>>
>> [1] .config - https://pastebin.com/raw/3nDSV8Sm
>> [2] bad.log - https://pastebin.com/raw/fvR5Sjzt
>> [3] good.log - https://pastebin.com/raw/EazfLAWA
>>
>> Thanks,
>> Yurii
>>
> I am aware of this issue, the necessary fix (commit 25fb5f47f34d) was already submitted upstream and will likely
> show up in the stable kernels soon.
>
> Thanks,
> Armin Wolf
next prev parent reply other threads:[~2024-12-06 21:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-06 13:33 [REGRESSION][BISECTED] asus-wmi driver fails on my laptop Yura Strilets
2024-12-06 18:15 ` Armin Wolf
2024-12-06 21:18 ` Yurii Strilets [this message]
2024-12-06 22:02 ` Armin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=78eb0efb-bbaf-4cba-840a-9aa507798075@gmail.com \
--to=yurastr100@gmail.com \
--cc=W_Armin@gmx.de \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=regressions@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox