From: Alex Bee <knaerzche@gmail.com>
To: "Heiko Stübner" <heiko@sntech.de>,
"Conor Dooley" <conor+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@gmail.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <mripard@kernel.org>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH v2 2/5] ARM: dts: rockchip: Add power-controller for RK3128
Date: Sat, 2 Dec 2023 17:36:15 +0100 [thread overview]
Message-ID: <7a6eed43-477a-48a4-bd64-4528da920ffd@gmail.com> (raw)
In-Reply-To: <6926340.F8r316W7xa@diego>
Hi Heiko,
Am 02.12.23 um 16:51 schrieb Heiko Stübner:
> Hi Alex,
>
> Am Samstag, 2. Dezember 2023, 13:51:41 CET schrieb Alex Bee:
>> Add power controller and qos nodes for RK3128 in order to use
>> them as powerdomains.
> does the power-domain controller work with the incomplete set of
> pm-domains too?
Yes, it does - the missing domains can request idle only and can't be
powered on/off - if no one requests idle they are just up all the time.
> What I have in mind is
> - adding the power-controller node with the existing set of power-domains
> - the gpu pm-domain is in there
> - adding the gpu parts
My main concern about adding them later was the change of the ABI after
they've been exposed in the SoC DT. If that's not an issue - sure: I can
add them in a separate series.
>
>
> And a second series with
> - patch1 from here
> - a dts patch adding the additional pm-domains to rk3128.dtsi
> - I guess patch1 also should be split into a patch adding the binding-ids
> and a separate patch for the code addition.
Yeah, I noticed this also :)
Regards,
Alex
>
>
> Heiko
>
>> Signed-off-by: Alex Bee <knaerzche@gmail.com>
>> ---
>> arch/arm/boot/dts/rockchip/rk3128.dtsi | 101 +++++++++++++++++++++++++
>> 1 file changed, 101 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
>> index 4e8b38604ecd..b72905db04f7 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
>> +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
>> @@ -8,6 +8,7 @@
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> #include <dt-bindings/interrupt-controller/irq.h>
>> #include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/power/rk3128-power.h>
>>
>> / {
>> compatible = "rockchip,rk3128";
>> @@ -133,6 +134,106 @@ smp-sram@0 {
>> pmu: syscon@100a0000 {
>> compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
>> reg = <0x100a0000 0x1000>;
>> +
>> + power: power-controller {
>> + compatible = "rockchip,rk3128-power-controller";
>> + #power-domain-cells = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + power-domain@RK3128_PD_VIO {
>> + reg = <RK3128_PD_VIO>;
>> + clocks = <&cru ACLK_CIF>,
>> + <&cru HCLK_CIF>,
>> + <&cru DCLK_EBC>,
>> + <&cru HCLK_EBC>,
>> + <&cru ACLK_IEP>,
>> + <&cru HCLK_IEP>,
>> + <&cru ACLK_LCDC0>,
>> + <&cru HCLK_LCDC0>,
>> + <&cru PCLK_MIPI>,
>> + <&cru ACLK_RGA>,
>> + <&cru HCLK_RGA>,
>> + <&cru ACLK_VIO0>,
>> + <&cru ACLK_VIO1>,
>> + <&cru HCLK_VIO>,
>> + <&cru HCLK_VIO_H2P>,
>> + <&cru DCLK_VOP>,
>> + <&cru SCLK_VOP>;
>> + pm_qos = <&qos_ebc>,
>> + <&qos_iep>,
>> + <&qos_lcdc>,
>> + <&qos_rga>,
>> + <&qos_vip>;
>> + #power-domain-cells = <0>;
>> + };
>> +
>> + power-domain@RK3128_PD_VIDEO {
>> + reg = <RK3128_PD_VIDEO>;
>> + clocks = <&cru ACLK_VDPU>,
>> + <&cru HCLK_VDPU>,
>> + <&cru ACLK_VEPU>,
>> + <&cru HCLK_VEPU>,
>> + <&cru SCLK_HEVC_CORE>;
>> + pm_qos = <&qos_vpu>;
>> + #power-domain-cells = <0>;
>> + };
>> +
>> + power-domain@RK3128_PD_GPU {
>> + reg = <RK3128_PD_GPU>;
>> + clocks = <&cru ACLK_GPU>;
>> + pm_qos = <&qos_gpu>;
>> + #power-domain-cells = <0>;
>> + };
>> +
>> + power-domain@RK3128_PD_CRYPTO {
>> + reg = <RK3128_PD_CRYPTO>;
>> + clocks = <&cru HCLK_CRYPTO>,
>> + <&cru SCLK_CRYPTO>;
>> + pm_qos = <&qos_crypto>;
>> + #power-domain-cells = <0>;
>> + };
>> + };
>> + };
>> +
>> + qos_crypto: qos@10128080 {
>> + compatible = "rockchip,rk3128-qos", "syscon";
>> + reg = <0x10128080 0x20>;
>> + };
>> +
>> + qos_gpu: qos@1012d000 {
>> + compatible = "rockchip,rk3128-qos", "syscon";
>> + reg = <0x1012d000 0x20>;
>> + };
>> +
>> + qos_vpu: qos@1012e000 {
>> + compatible = "rockchip,rk3128-qos", "syscon";
>> + reg = <0x1012e000 0x20>;
>> + };
>> +
>> + qos_rga: qos@1012f000 {
>> + compatible = "rockchip,rk3128-qos", "syscon";
>> + reg = <0x1012f000 0x20>;
>> + };
>> +
>> + qos_ebc: qos@1012f080 {
>> + compatible = "rockchip,rk3128-qos", "syscon";
>> + reg = <0x1012f080 0x20>;
>> + };
>> +
>> + qos_iep: qos@1012f100 {
>> + compatible = "rockchip,rk3128-qos", "syscon";
>> + reg = <0x1012f100 0x20>;
>> + };
>> +
>> + qos_lcdc: qos@1012f180 {
>> + compatible = "rockchip,rk3128-qos", "syscon";
>> + reg = <0x1012f180 0x20>;
>> + };
>> +
>> + qos_vip: qos@1012f200 {
>> + compatible = "rockchip,rk3128-qos", "syscon";
>> + reg = <0x1012f200 0x20>;
>> };
>>
>> gic: interrupt-controller@10139000 {
>>
>
>
>
next prev parent reply other threads:[~2023-12-02 16:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-02 12:51 [PATCH v2 0/5] Add power-controller and gpu for RK3128 Alex Bee
2023-12-02 12:51 ` [PATCH v2 1/5] pmdomain: rockchip: Add missing powerdomains " Alex Bee
2023-12-08 15:29 ` Rob Herring
2023-12-02 12:51 ` [PATCH v2 2/5] ARM: dts: rockchip: Add power-controller " Alex Bee
2023-12-02 15:51 ` Heiko Stübner
2023-12-02 16:36 ` Alex Bee [this message]
2023-12-02 17:46 ` Heiko Stübner
2023-12-03 16:05 ` Alex Bee
2023-12-03 16:42 ` Heiko Stübner
2023-12-04 15:23 ` Alex Bee
2023-12-02 12:51 ` [PATCH v2 3/5] dt-bindings: gpu: mali-utgard: Add Rockchip RK3128 compatible Alex Bee
2023-12-02 12:51 ` [PATCH v2 4/5] ARM: dts: rockchip: Add GPU node for RK3128 Alex Bee
2023-12-02 12:51 ` [PATCH v2 5/5] ARM: dts: rockchip: Enable GPU for XPI-3128 Alex Bee
2023-12-02 15:57 ` (subset) [PATCH v2 0/5] Add power-controller and gpu for RK3128 Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a6eed43-477a-48a4-bd64-4528da920ffd@gmail.com \
--to=knaerzche@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox