Re: [PATCH v2 2/7] arm64: dts: qcom: sc7280: Add WSA SoundWire and LPASS support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 4/29/25 11:24 AM, Prasad Kumpatla wrote:
> From: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> 
> Add WSA LPASS macro Codec along with SoundWire controller.
> 
> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
> Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 68 ++++++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 3453740c0d14..d4aacb97a18c 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2601,6 +2601,64 @@
>  			status = "disabled";
>  		};
>  
> +		lpass_wsa_macro: codec@3240000 {
> +			compatible = "qcom,sc7280-lpass-wsa-macro";
> +			reg = <0x0 0x03240000 0x0 0x1000>;
> +
> +			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
> +				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
> +				 <&lpass_va_macro>;
> +			clock-names = "mclk", "npl", "fsgen";

Please make this a vertical list

> +
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lpass_wsa_swr_clk>, <&lpass_wsa_swr_data>;

property-n
property-names

across all changes, please

[...]

> +		swr2: soundwire@3250000 {
> +			compatible = "qcom,soundwire-v1.6.0";
> +			reg = <0x0 0x03250000 0x0 0x2000>;
> +
> +			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&lpass_wsa_macro>;
> +			clock-names = "iface";
> +
> +			resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
> +			reset-names = "swr_audio_cgcr";
> +
> +			qcom,din-ports = <2>;

The computer tells me it should be 3


Konrad