[PATCH v3 0/7] SPMI: Implement sub-devices and migrate drivers

[PATCH v3 0/7] SPMI: Implement sub-devices and migrate drivers

[AngeloGioacchino Del Regno]

Changes in v3:
 - Fixed importing "SPMI" namespace in spmi-devres.c
 - Removed all instances of defensive programming, as pointed out by
   jic23 and Sebastian
 - Removed explicit casting as pointed out by jic23
 - Moved ida_free call to spmi_subdev_release() and simplified error
   handling in spmi_subdevice_alloc_and_add() as pointed out by jic23

Changes in v2:
 - Fixed missing `sparent` initialization in phy-qcom-eusb2-repeater
 - Changed val_bits to 8 in all Qualcomm drivers to ensure
   compatibility as suggested by Casey
 - Added struct device pointer in all conversion commits as suggested
   by Andy
 - Exported newly introduced functions with a new "SPMI" namespace
   and imported the same in all converted drivers as suggested by Andy
 - Added missing error checking for dev_set_name() call in spmi.c
   as suggested by Andy
 - Added comma to last entry of regmap_config as suggested by Andy

While adding support for newer MediaTek platforms, featuring complex
SPMI PMICs, I've seen that those SPMI-connected chips are internally
divided in various IP blocks, reachable in specific contiguous address
ranges... more or less like a MMIO, but over a slow SPMI bus instead.

I recalled that Qualcomm had something similar... and upon checking a
couple of devicetrees, yeah - indeed it's the same over there.

What I've seen then is a common pattern of reading the "reg" property
from devicetree in a struct member and then either
 A. Wrapping regmap_{read/write/etc}() calls in a function that adds
    the register base with "base + ..register", like it's done with
    writel()/readl() calls; or
 B. Doing the same as A. but without wrapper functions.

Even though that works just fine, in my opinion it's wrong.

The regmap API is way more complex than MMIO-only readl()/writel()
functions for multiple reasons (including supporting multiple busses
like SPMI, of course) - but everyone seemed to forget that regmap
can manage register base offsets transparently and automatically in
its API functions by simply adding a `reg_base` to the regmap_config
structure, which is used for initializing a `struct regmap`.

So, here we go: this series implements the software concept of an SPMI
Sub-Device (which, well, also reflects how Qualcomm and MediaTek's
actual hardware is laid out anyway).

               SPMI Controller
                     |                ______
                     |               /       Sub-Device 1
                     V              /
              SPMI Device (PMIC) ----------- Sub-Device 2
                                    \
                                     \______ Sub-Device 3

As per this implementation, an SPMI Sub-Device can be allocated/created
and added in any driver that implements a... well.. subdevice (!) with
an SPMI "main" device as its parent: this allows to create and finally
to correctly configure a regmap that is specific to the sub-device,
operating on its specific address range and reading, and writing, to
its registers with the regmap API taking care of adding the base address
of a sub-device's registers as per regmap API design.

All of the SPMI Sub-Devices are therefore added as children of the SPMI
Device (usually a PMIC), as communication depends on the PMIC's SPMI bus
to be available (and the PMIC to be up and running, of course).

Summarizing the dependency chain (which is obvious to whoever knows what
is going on with Qualcomm and/or MediaTek SPMI PMICs):
    "SPMI Sub-Device x...N" are children "SPMI Device"
    "SPMI Device" is a child of "SPMI Controller"

(that was just another way to say the same thing as the graph above anyway).

Along with the new SPMI Sub-Device registration functions, I have also
performed a conversion of some Qualcomm SPMI drivers and only where the
actual conversion was trivial.

I haven't included any conversion of more complex Qualcomm SPMI drivers
because I don't have the required bandwidth to do so (and besides, I think,
but haven't exactly verified, that some of those require SoCs that I don't
have for testing anyway).

AngeloGioacchino Del Regno (7):
  spmi: Implement spmi_subdevice_alloc_and_add() and devm variant
  nvmem: qcom-spmi-sdam: Migrate to devm_spmi_subdevice_alloc_and_add()
  power: reset: qcom-pon: Migrate to devm_spmi_subdevice_alloc_and_add()
  phy: qualcomm: eusb2-repeater: Migrate to
    devm_spmi_subdevice_alloc_and_add()
  misc: qcom-coincell: Migrate to devm_spmi_subdevice_alloc_and_add()
  iio: adc: qcom-spmi-iadc: Migrate to
    devm_spmi_subdevice_alloc_and_add()
  iio: adc: qcom-spmi-iadc: Remove regmap R/W wrapper functions

 drivers/iio/adc/qcom-spmi-iadc.c              | 109 ++++++++----------
 drivers/misc/qcom-coincell.c                  |  38 ++++--
 drivers/nvmem/qcom-spmi-sdam.c                |  37 ++++--
 .../phy/qualcomm/phy-qcom-eusb2-repeater.c    |  51 +++++---
 drivers/power/reset/qcom-pon.c                |  34 ++++--
 drivers/spmi/spmi-devres.c                    |  24 ++++
 drivers/spmi/spmi.c                           |  79 +++++++++++++
 include/linux/spmi.h                          |  16 +++
 8 files changed, 278 insertions(+), 110 deletions(-)

-- 
2.50.1

[PATCH v3 1/7] spmi: Implement spmi_subdevice_alloc_and_add() and devm variant

[AngeloGioacchino Del Regno]

Some devices connected over the SPMI bus may be big, in the sense
that those may be a complex of devices managed by a single chip
over the SPMI bus, reachable through a single SID.

Add new functions aimed at managing sub-devices of a SPMI device
spmi_subdevice_alloc_and_add() and a spmi_subdevice_put_and_remove()
for adding a new subdevice and removing it respectively, and also
add their devm_* variants.

The need for such functions comes from the existance of	those
complex Power Management ICs (PMICs), which feature one or many
sub-devices, in some cases with these being even addressable on
the chip in form of SPMI register ranges.

Examples of those devices can be found in both Qualcomm platforms
with their PMICs having PON, RTC, SDAM, GPIO controller, and other
sub-devices, and in newer MediaTek platforms showing similar HW
features and a similar layout with those also having many subdevs.

Also, instead of generally exporting symbols, export them with a
new "SPMI" namespace: all users will have to import this namespace
to make use of the newly introduced exports.

Link: https://lore.kernel.org/r/20250722101317.76729-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/spmi/spmi-devres.c | 24 ++++++++++++
 drivers/spmi/spmi.c        | 79 ++++++++++++++++++++++++++++++++++++++
 include/linux/spmi.h       | 16 ++++++++
 3 files changed, 119 insertions(+)

diff --git a/drivers/spmi/spmi-devres.c b/drivers/spmi/spmi-devres.c
index 62c4b3f24d06..8feebab0365b 100644
--- a/drivers/spmi/spmi-devres.c
+++ b/drivers/spmi/spmi-devres.c
@@ -60,5 +60,29 @@ int devm_spmi_controller_add(struct device *parent, struct spmi_controller *ctrl
 }
 EXPORT_SYMBOL_GPL(devm_spmi_controller_add);
 
+static void devm_spmi_subdevice_remove(void *res)
+{
+	spmi_subdevice_remove(res);
+}
+
+struct spmi_subdevice *devm_spmi_subdevice_alloc_and_add(struct device *dev,
+							 struct spmi_device *sparent)
+{
+	struct spmi_subdevice *sub_sdev;
+	int ret;
+
+	sub_sdev = spmi_subdevice_alloc_and_add(sparent);
+	if (IS_ERR(sub_sdev))
+		return sub_sdev;
+
+	ret = devm_add_action_or_reset(dev, devm_spmi_subdevice_remove, sub_sdev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return sub_sdev;
+}
+EXPORT_SYMBOL_NS_GPL(devm_spmi_subdevice_alloc_and_add, "SPMI");
+
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SPMI devres helpers");
+MODULE_IMPORT_NS("SPMI");
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index 3cf8d9bd4566..e011876c3187 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -19,6 +19,7 @@
 
 static bool is_registered;
 static DEFINE_IDA(ctrl_ida);
+static DEFINE_IDA(spmi_subdevice_ida);
 
 static void spmi_dev_release(struct device *dev)
 {
@@ -31,6 +32,19 @@ static const struct device_type spmi_dev_type = {
 	.release	= spmi_dev_release,
 };
 
+static void spmi_subdev_release(struct device *dev)
+{
+	struct spmi_device *sdev = to_spmi_device(dev);
+	struct spmi_subdevice *sub_sdev = container_of(sdev, struct spmi_subdevice, sdev);
+
+	ida_free(&spmi_subdevice_ida, sub_sdev->devid);
+	kfree(sub_sdev);
+}
+
+static const struct device_type spmi_subdev_type = {
+	.release	= spmi_subdev_release,
+};
+
 static void spmi_ctrl_release(struct device *dev)
 {
 	struct spmi_controller *ctrl = to_spmi_controller(dev);
@@ -90,6 +104,18 @@ void spmi_device_remove(struct spmi_device *sdev)
 }
 EXPORT_SYMBOL_GPL(spmi_device_remove);
 
+/**
+ * spmi_subdevice_remove() - Remove an SPMI subdevice
+ * @sub_sdev:	spmi_device to be removed
+ */
+void spmi_subdevice_remove(struct spmi_subdevice *sub_sdev)
+{
+	struct spmi_device *sdev = &sub_sdev->sdev;
+
+	device_unregister(&sdev->dev);
+}
+EXPORT_SYMBOL_NS_GPL(spmi_subdevice_remove, "SPMI");
+
 static inline int
 spmi_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid)
 {
@@ -431,6 +457,59 @@ struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl)
 }
 EXPORT_SYMBOL_GPL(spmi_device_alloc);
 
+/**
+ * spmi_subdevice_alloc_and_add(): Allocate and add a new SPMI sub-device
+ * @sparent:	SPMI parent device with previously registered SPMI controller
+ *
+ * Returns:
+ * Pointer to newly allocated SPMI sub-device for success or negative ERR_PTR.
+ */
+struct spmi_subdevice *spmi_subdevice_alloc_and_add(struct spmi_device *sparent)
+{
+	struct spmi_subdevice *sub_sdev;
+	struct spmi_device *sdev;
+	int ret;
+
+	sub_sdev = kzalloc(sizeof(*sub_sdev), GFP_KERNEL);
+	if (!sub_sdev)
+		return ERR_PTR(-ENOMEM);
+
+	ret = ida_alloc(&spmi_subdevice_ida, GFP_KERNEL);
+	if (ret < 0) {
+		kfree(sub_sdev);
+		return ERR_PTR(ret);
+	}
+
+	sdev = &sub_sdev->sdev;
+	sdev->ctrl = sparent->ctrl;
+	device_initialize(&sdev->dev);
+	sdev->dev.parent = &sparent->dev;
+	sdev->dev.bus = &spmi_bus_type;
+	sdev->dev.type = &spmi_subdev_type;
+
+	sub_sdev->devid = ret;
+	sdev->usid = sparent->usid;
+
+	ret = dev_set_name(&sdev->dev, "%d-%02x.%d.auto",
+			   sdev->ctrl->nr, sdev->usid, sub_sdev->devid);
+	if (ret)
+		goto err_put_dev;
+
+	ret = device_add(&sdev->dev);
+	if (ret) {
+		dev_err(&sdev->dev, "Can't add %s, status %d\n",
+			dev_name(&sdev->dev), ret);
+		goto err_put_dev;
+	}
+
+	return sub_sdev;
+
+err_put_dev:
+	put_device(&sdev->dev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_NS_GPL(spmi_subdevice_alloc_and_add, "SPMI");
+
 /**
  * spmi_controller_alloc() - Allocate a new SPMI controller
  * @parent:	parent device
diff --git a/include/linux/spmi.h b/include/linux/spmi.h
index 28e8c8bd3944..7cea0a5b034b 100644
--- a/include/linux/spmi.h
+++ b/include/linux/spmi.h
@@ -69,6 +69,22 @@ int spmi_device_add(struct spmi_device *sdev);
 
 void spmi_device_remove(struct spmi_device *sdev);
 
+/**
+ * struct spmi_subdevice - Basic representation of an SPMI sub-device
+ * @sdev:	Sub-device representation of an SPMI device
+ * @devid:	Platform Device ID of an SPMI sub-device
+ */
+struct spmi_subdevice {
+	struct spmi_device	sdev;
+	unsigned int		devid;
+};
+
+struct spmi_subdevice *spmi_subdevice_alloc_and_add(struct spmi_device *sparent);
+void spmi_subdevice_remove(struct spmi_subdevice *sdev);
+
+struct spmi_subdevice *devm_spmi_subdevice_alloc_and_add(struct device *dev,
+							 struct spmi_device *sparent);
+
 /**
  * struct spmi_controller - interface to the SPMI master controller
  * @dev:	Driver model representation of the device.
-- 
2.50.1

Re: [PATCH v3 1/7] spmi: Implement spmi_subdevice_alloc_and_add() and devm variant

[Jonathan Cameron]

On Wed, 30 Jul 2025 13:26:39 +0200
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> wrote:

> Some devices connected over the SPMI bus may be big, in the sense
> that those may be a complex of devices managed by a single chip
> over the SPMI bus, reachable through a single SID.
> 
> Add new functions aimed at managing sub-devices of a SPMI device
> spmi_subdevice_alloc_and_add() and a spmi_subdevice_put_and_remove()
> for adding a new subdevice and removing it respectively, and also
> add their devm_* variants.
> 
> The need for such functions comes from the existance of	those
> complex Power Management ICs (PMICs), which feature one or many
> sub-devices, in some cases with these being even addressable on
> the chip in form of SPMI register ranges.
> 
> Examples of those devices can be found in both Qualcomm platforms
> with their PMICs having PON, RTC, SDAM, GPIO controller, and other
> sub-devices, and in newer MediaTek platforms showing similar HW
> features and a similar layout with those also having many subdevs.
> 
> Also, instead of generally exporting symbols, export them with a
> new "SPMI" namespace: all users will have to import this namespace
> to make use of the newly introduced exports.
> 
> Link: https://lore.kernel.org/r/20250722101317.76729-2-angelogioacchino.delregno@collabora.com
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
With the note that I know almost nothing about SPMI so am just
looking at what is here + replies in earlier threads.
Looks good to me.

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>

[PATCH v3 2/7] nvmem: qcom-spmi-sdam: Migrate to devm_spmi_subdevice_alloc_and_add()

[AngeloGioacchino Del Regno]

Some Qualcomm PMICs integrate a SDAM device, internally located in
a specific address range reachable through SPMI communication.

Instead of using the parent SPMI device (the main PMIC) as a kind
of syscon in this driver, register a new SPMI sub-device for SDAM
and initialize its own regmap with this sub-device's specific base
address, retrieved from the devicetree.

This allows to stop manually adding the register base address to
every R/W call in this driver, as this can be, and is now, handled
by the regmap API instead.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250722101317.76729-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/nvmem/qcom-spmi-sdam.c | 37 ++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/nvmem/qcom-spmi-sdam.c b/drivers/nvmem/qcom-spmi-sdam.c
index 4f1cca6eab71..9a4be20dfa9f 100644
--- a/drivers/nvmem/qcom-spmi-sdam.c
+++ b/drivers/nvmem/qcom-spmi-sdam.c
@@ -9,6 +9,7 @@
 #include <linux/nvmem-provider.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/spmi.h>
 
 #define SDAM_MEM_START			0x40
 #define REGISTER_MAP_ID			0x40
@@ -20,7 +21,6 @@
 struct sdam_chip {
 	struct regmap			*regmap;
 	struct nvmem_config		sdam_config;
-	unsigned int			base;
 	unsigned int			size;
 };
 
@@ -73,7 +73,7 @@ static int sdam_read(void *priv, unsigned int offset, void *val,
 		return -EINVAL;
 	}
 
-	rc = regmap_bulk_read(sdam->regmap, sdam->base + offset, val, bytes);
+	rc = regmap_bulk_read(sdam->regmap, offset, val, bytes);
 	if (rc < 0)
 		dev_err(dev, "Failed to read SDAM offset %#x len=%zd, rc=%d\n",
 						offset, bytes, rc);
@@ -100,7 +100,7 @@ static int sdam_write(void *priv, unsigned int offset, void *val,
 		return -EINVAL;
 	}
 
-	rc = regmap_bulk_write(sdam->regmap, sdam->base + offset, val, bytes);
+	rc = regmap_bulk_write(sdam->regmap, offset, val, bytes);
 	if (rc < 0)
 		dev_err(dev, "Failed to write SDAM offset %#x len=%zd, rc=%d\n",
 						offset, bytes, rc);
@@ -110,8 +110,17 @@ static int sdam_write(void *priv, unsigned int offset, void *val,
 
 static int sdam_probe(struct platform_device *pdev)
 {
+	struct regmap_config sdam_regmap_config = {
+		.reg_bits = 16,
+		.val_bits = 8,
+		.max_register = 0x100,
+		.fast_io = true,
+	};
 	struct sdam_chip *sdam;
 	struct nvmem_device *nvmem;
+	struct spmi_device *sparent;
+	struct spmi_subdevice *sub_sdev;
+	struct device *dev = &pdev->dev;
 	unsigned int val;
 	int rc;
 
@@ -119,19 +128,24 @@ static int sdam_probe(struct platform_device *pdev)
 	if (!sdam)
 		return -ENOMEM;
 
-	sdam->regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!sdam->regmap) {
-		dev_err(&pdev->dev, "Failed to get regmap handle\n");
-		return -ENXIO;
-	}
+	sparent = to_spmi_device(dev->parent);
+	sub_sdev = devm_spmi_subdevice_alloc_and_add(dev, sparent);
+	if (IS_ERR(sub_sdev))
+		return PTR_ERR(sub_sdev);
 
-	rc = of_property_read_u32(pdev->dev.of_node, "reg", &sdam->base);
+	rc = of_property_read_u32(dev->of_node, "reg", &sdam_regmap_config.reg_base);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Failed to get SDAM base, rc=%d\n", rc);
 		return -EINVAL;
 	}
 
-	rc = regmap_read(sdam->regmap, sdam->base + SDAM_SIZE, &val);
+	sdam->regmap = devm_regmap_init_spmi_ext(&sub_sdev->sdev, &sdam_regmap_config);
+	if (IS_ERR(sdam->regmap)) {
+		dev_err(&pdev->dev, "Failed to get regmap handle\n");
+		return PTR_ERR(sdam->regmap);
+	}
+
+	rc = regmap_read(sdam->regmap, SDAM_SIZE, &val);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Failed to read SDAM_SIZE rc=%d\n", rc);
 		return -EINVAL;
@@ -159,7 +173,7 @@ static int sdam_probe(struct platform_device *pdev)
 	}
 	dev_dbg(&pdev->dev,
 		"SDAM base=%#x size=%u registered successfully\n",
-		sdam->base, sdam->size);
+		sdam_regmap_config.reg_base, sdam->size);
 
 	return 0;
 }
@@ -181,3 +195,4 @@ module_platform_driver(sdam_driver);
 
 MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
 MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS("SPMI");
-- 
2.50.1

[PATCH v3 3/7] power: reset: qcom-pon: Migrate to devm_spmi_subdevice_alloc_and_add()

[AngeloGioacchino Del Regno]

Some Qualcomm PMICs integrates a Power On device supporting pwrkey
and resin along with the Android reboot reason action identifier.

Instead of using the parent SPMI device (the main PMIC) as a kind
of syscon in this driver, register a new SPMI sub-device for PON
and initialize its own regmap with this sub-device's specific base
address, retrieved from the devicetree.

This allows to stop manually adding the register base address to
every R/W call in this driver, as this can be, and is now, handled
by the regmap API instead.

Link: https://lore.kernel.org/r/20250722101317.76729-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/power/reset/qcom-pon.c | 34 +++++++++++++++++++++++++---------
 1 file changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
index 7e108982a582..0e075a2e5e48 100644
--- a/drivers/power/reset/qcom-pon.c
+++ b/drivers/power/reset/qcom-pon.c
@@ -11,6 +11,7 @@
 #include <linux/reboot.h>
 #include <linux/reboot-mode.h>
 #include <linux/regmap.h>
+#include <linux/spmi.h>
 
 #define PON_SOFT_RB_SPARE		0x8f
 
@@ -22,7 +23,6 @@
 struct qcom_pon {
 	struct device *dev;
 	struct regmap *regmap;
-	u32 baseaddr;
 	struct reboot_mode_driver reboot_mode;
 	long reason_shift;
 };
@@ -35,7 +35,7 @@ static int qcom_pon_reboot_mode_write(struct reboot_mode_driver *reboot,
 	int ret;
 
 	ret = regmap_update_bits(pon->regmap,
-				 pon->baseaddr + PON_SOFT_RB_SPARE,
+				 PON_SOFT_RB_SPARE,
 				 GENMASK(7, pon->reason_shift),
 				 magic << pon->reason_shift);
 	if (ret < 0)
@@ -46,27 +46,42 @@ static int qcom_pon_reboot_mode_write(struct reboot_mode_driver *reboot,
 
 static int qcom_pon_probe(struct platform_device *pdev)
 {
+	struct regmap_config qcom_pon_regmap_config = {
+		.reg_bits = 16,
+		.val_bits = 8,
+		.max_register = 0x100,
+		.fast_io = true,
+	};
+	struct device *dev = &pdev->dev;
+	struct spmi_subdevice *sub_sdev;
+	struct spmi_device *sparent;
 	struct qcom_pon *pon;
 	long reason_shift;
 	int error;
 
+	if (!dev->parent)
+		return -ENODEV;
+
 	pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
 	if (!pon)
 		return -ENOMEM;
 
 	pon->dev = &pdev->dev;
 
-	pon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!pon->regmap) {
-		dev_err(&pdev->dev, "failed to locate regmap\n");
-		return -ENODEV;
-	}
+	sparent = to_spmi_device(dev->parent);
+	sub_sdev = devm_spmi_subdevice_alloc_and_add(dev, sparent);
+	if (IS_ERR(sub_sdev))
+		return PTR_ERR(sub_sdev);
 
-	error = of_property_read_u32(pdev->dev.of_node, "reg",
-				     &pon->baseaddr);
+	error = of_property_read_u32(dev->of_node, "reg",
+				     &qcom_pon_regmap_config.reg_base);
 	if (error)
 		return error;
 
+	pon->regmap = devm_regmap_init_spmi_ext(&sub_sdev->sdev, &qcom_pon_regmap_config);
+	if (IS_ERR(pon->regmap))
+		return PTR_ERR(pon->regmap);
+
 	reason_shift = (long)of_device_get_match_data(&pdev->dev);
 
 	if (reason_shift != NO_REASON_SHIFT) {
@@ -106,3 +121,4 @@ module_platform_driver(qcom_pon_driver);
 
 MODULE_DESCRIPTION("Qualcomm Power On driver");
 MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS("SPMI");
-- 
2.50.1

[PATCH v3 4/7] phy: qualcomm: eusb2-repeater: Migrate to devm_spmi_subdevice_alloc_and_add()

[AngeloGioacchino Del Regno]

Some Qualcomm PMICs integrate an USB Repeater device, used to
convert between eUSB2 and USB 2.0 signaling levels, reachable
in a specific address range over SPMI.

Instead of using the parent SPMI device (the main PMIC) as a kind
of syscon in this driver, register a new SPMI sub-device for EUSB2
and initialize its own regmap with this sub-device's specific base
address, retrieved from the devicetree.

This allows to stop manually adding the register base address to
every R/W call in this driver, as this can be, and is now, handled
by the regmap API instead.

Link: https://lore.kernel.org/r/20250722101317.76729-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../phy/qualcomm/phy-qcom-eusb2-repeater.c    | 51 ++++++++++++-------
 1 file changed, 33 insertions(+), 18 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index e0f2acc8109c..50eeebfb51a9 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -9,6 +9,7 @@
 #include <linux/regmap.h>
 #include <linux/of.h>
 #include <linux/phy/phy.h>
+#include <linux/spmi.h>
 
 /* eUSB2 status registers */
 #define EUSB2_RPTR_STATUS		0x08
@@ -55,7 +56,6 @@ struct eusb2_repeater {
 	struct phy *phy;
 	struct regulator_bulk_data *vregs;
 	const struct eusb2_repeater_cfg *cfg;
-	u32 base;
 	enum phy_mode mode;
 };
 
@@ -110,7 +110,6 @@ static int eusb2_repeater_init(struct phy *phy)
 	struct eusb2_repeater *rptr = phy_get_drvdata(phy);
 	struct device_node *np = rptr->dev->of_node;
 	struct regmap *regmap = rptr->regmap;
-	u32 base = rptr->base;
 	u32 poll_val;
 	int ret;
 	u8 val;
@@ -119,25 +118,25 @@ static int eusb2_repeater_init(struct phy *phy)
 	if (ret)
 		return ret;
 
-	regmap_write(regmap, base + EUSB2_EN_CTL1, EUSB2_RPTR_EN);
+	regmap_write(regmap, EUSB2_EN_CTL1, EUSB2_RPTR_EN);
 
 	/* Write registers from init table */
 	for (int i = 0; i < rptr->cfg->init_tbl_num; i++)
-		regmap_write(regmap, base + rptr->cfg->init_tbl[i].reg,
+		regmap_write(regmap, rptr->cfg->init_tbl[i].reg,
 			     rptr->cfg->init_tbl[i].value);
 
 	/* Override registers from devicetree values */
 	if (!of_property_read_u8(np, "qcom,tune-usb2-amplitude", &val))
-		regmap_write(regmap, base + EUSB2_TUNE_USB2_PREEM, val);
+		regmap_write(regmap, EUSB2_TUNE_USB2_PREEM, val);
 
 	if (!of_property_read_u8(np, "qcom,tune-usb2-disc-thres", &val))
-		regmap_write(regmap, base + EUSB2_TUNE_HSDISC, val);
+		regmap_write(regmap, EUSB2_TUNE_HSDISC, val);
 
 	if (!of_property_read_u8(np, "qcom,tune-usb2-preem", &val))
-		regmap_write(regmap, base + EUSB2_TUNE_IUSB2, val);
+		regmap_write(regmap, EUSB2_TUNE_IUSB2, val);
 
 	/* Wait for status OK */
-	ret = regmap_read_poll_timeout(regmap, base + EUSB2_RPTR_STATUS, poll_val,
+	ret = regmap_read_poll_timeout(regmap, EUSB2_RPTR_STATUS, poll_val,
 				       poll_val & RPTR_OK, 10, 5);
 	if (ret)
 		dev_err(rptr->dev, "initialization timed-out\n");
@@ -150,7 +149,6 @@ static int eusb2_repeater_set_mode(struct phy *phy,
 {
 	struct eusb2_repeater *rptr = phy_get_drvdata(phy);
 	struct regmap *regmap = rptr->regmap;
-	u32 base = rptr->base;
 
 	switch (mode) {
 	case PHY_MODE_USB_HOST:
@@ -159,8 +157,8 @@ static int eusb2_repeater_set_mode(struct phy *phy,
 		 * per eUSB 1.2 Spec. Below implement software workaround until
 		 * PHY and controller is fixing seen observation.
 		 */
-		regmap_write(regmap, base + EUSB2_FORCE_EN_5, F_CLK_19P2M_EN);
-		regmap_write(regmap, base + EUSB2_FORCE_VAL_5, V_CLK_19P2M_EN);
+		regmap_write(regmap, EUSB2_FORCE_EN_5, F_CLK_19P2M_EN);
+		regmap_write(regmap, EUSB2_FORCE_VAL_5, V_CLK_19P2M_EN);
 		break;
 	case PHY_MODE_USB_DEVICE:
 		/*
@@ -169,8 +167,8 @@ static int eusb2_repeater_set_mode(struct phy *phy,
 		 * repeater doesn't clear previous value due to shared
 		 * regulators (say host <-> device mode switch).
 		 */
-		regmap_write(regmap, base + EUSB2_FORCE_EN_5, 0);
-		regmap_write(regmap, base + EUSB2_FORCE_VAL_5, 0);
+		regmap_write(regmap, EUSB2_FORCE_EN_5, 0);
+		regmap_write(regmap, EUSB2_FORCE_VAL_5, 0);
 		break;
 	default:
 		return -EINVAL;
@@ -195,13 +193,23 @@ static const struct phy_ops eusb2_repeater_ops = {
 
 static int eusb2_repeater_probe(struct platform_device *pdev)
 {
+	struct regmap_config eusb2_regmap_config = {
+		.reg_bits = 16,
+		.val_bits = 8,
+		.max_register = 0x100,
+		.fast_io = true,
+	};
+	struct spmi_device *sparent;
 	struct eusb2_repeater *rptr;
+	struct spmi_subdevice *sub_sdev;
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
 	struct device_node *np = dev->of_node;
-	u32 res;
 	int ret;
 
+	if (!dev->parent)
+		return -ENODEV;
+
 	rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL);
 	if (!rptr)
 		return -ENOMEM;
@@ -213,15 +221,21 @@ static int eusb2_repeater_probe(struct platform_device *pdev)
 	if (!rptr->cfg)
 		return -EINVAL;
 
-	rptr->regmap = dev_get_regmap(dev->parent, NULL);
-	if (!rptr->regmap)
+	sparent = to_spmi_device(dev->parent);
+	if (!sparent)
 		return -ENODEV;
 
-	ret = of_property_read_u32(np, "reg", &res);
+	sub_sdev = devm_spmi_subdevice_alloc_and_add(dev, sparent);
+	if (IS_ERR(sub_sdev))
+		return PTR_ERR(sub_sdev);
+
+	ret = of_property_read_u32(np, "reg", &eusb2_regmap_config.reg_base);
 	if (ret < 0)
 		return ret;
 
-	rptr->base = res;
+	rptr->regmap = devm_regmap_init_spmi_ext(&sub_sdev->sdev, &eusb2_regmap_config);
+	if (IS_ERR(rptr->regmap))
+		return -ENODEV;
 
 	ret = eusb2_repeater_init_vregs(rptr);
 	if (ret < 0) {
@@ -280,3 +294,4 @@ module_platform_driver(eusb2_repeater_driver);
 
 MODULE_DESCRIPTION("Qualcomm PMIC eUSB2 Repeater driver");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("SPMI");
-- 
2.50.1

Re: [PATCH v3 4/7] phy: qualcomm: eusb2-repeater: Migrate to devm_spmi_subdevice_alloc_and_add()

[kernel test robot]

Hi AngeloGioacchino,

kernel test robot noticed the following build errors:

[auto build test ERROR on next-20250730]
[cannot apply to jic23-iio/togreg sre-power-supply/for-next char-misc/char-misc-testing char-misc/char-misc-next char-misc/char-misc-linus linus/master v6.16 v6.16-rc7 v6.16-rc6 v6.16]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/AngeloGioacchino-Del-Regno/spmi-Implement-spmi_subdevice_alloc_and_add-and-devm-variant/20250730-193217
base:   next-20250730
patch link:    https://lore.kernel.org/r/20250730112645.542179-5-angelogioacchino.delregno%40collabora.com
patch subject: [PATCH v3 4/7] phy: qualcomm: eusb2-repeater: Migrate to devm_spmi_subdevice_alloc_and_add()
config: arm64-randconfig-002-20250731 (https://download.01.org/0day-ci/archive/20250731/202507311150.5ofvQlKl-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.4.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250731/202507311150.5ofvQlKl-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202507311150.5ofvQlKl-lkp@intel.com/

All errors (new ones prefixed by >>):

>> aarch64-linux-ld: Unexpected GOT/PLT entries detected!
>> aarch64-linux-ld: Unexpected run-time procedure linkages detected!
   aarch64-linux-ld: drivers/phy/qualcomm/phy-qcom-eusb2-repeater.o: in function `eusb2_repeater_probe':
   drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c:228:(.text+0x5a8): undefined reference to `devm_spmi_subdevice_alloc_and_add'
>> aarch64-linux-ld: drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c:236:(.text+0x61c): undefined reference to `__devm_regmap_init_spmi_ext'

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

[PATCH v3 5/7] misc: qcom-coincell: Migrate to devm_spmi_subdevice_alloc_and_add()

[AngeloGioacchino Del Regno]

Some Qualcomm PMICs integrate a charger for coincells, usually
powering an RTC when external (or main battery) power is missing.

Instead of using the parent SPMI device (the main PMIC) as a kind
of syscon in this driver, register a new SPMI sub-device and
initialize its own regmap with this sub-device's specific base
address, retrieved from the devicetree.

This allows to stop manually adding the register base address to
every R/W call in this driver, as this can be, and is now, handled
by the regmap API instead.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250722101317.76729-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/misc/qcom-coincell.c | 38 +++++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 11 deletions(-)

diff --git a/drivers/misc/qcom-coincell.c b/drivers/misc/qcom-coincell.c
index 3c57f7429147..49e38442b289 100644
--- a/drivers/misc/qcom-coincell.c
+++ b/drivers/misc/qcom-coincell.c
@@ -9,11 +9,11 @@
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/platform_device.h>
+#include <linux/spmi.h>
 
 struct qcom_coincell {
 	struct device	*dev;
 	struct regmap	*regmap;
-	u32		base_addr;
 };
 
 #define QCOM_COINCELL_REG_RSET		0x44
@@ -35,7 +35,7 @@ static int qcom_coincell_chgr_config(struct qcom_coincell *chgr, int rset,
 	/* if disabling, just do that and skip other operations */
 	if (!enable)
 		return regmap_write(chgr->regmap,
-			  chgr->base_addr + QCOM_COINCELL_REG_ENABLE, 0);
+			  QCOM_COINCELL_REG_ENABLE, 0);
 
 	/* find index for current-limiting resistor */
 	for (i = 0; i < ARRAY_SIZE(qcom_rset_map); i++)
@@ -58,7 +58,7 @@ static int qcom_coincell_chgr_config(struct qcom_coincell *chgr, int rset,
 	}
 
 	rc = regmap_write(chgr->regmap,
-			  chgr->base_addr + QCOM_COINCELL_REG_RSET, i);
+			  QCOM_COINCELL_REG_RSET, i);
 	if (rc) {
 		/*
 		 * This is mainly to flag a bad base_addr (reg) from dts.
@@ -71,19 +71,28 @@ static int qcom_coincell_chgr_config(struct qcom_coincell *chgr, int rset,
 	}
 
 	rc = regmap_write(chgr->regmap,
-		chgr->base_addr + QCOM_COINCELL_REG_VSET, j);
+		QCOM_COINCELL_REG_VSET, j);
 	if (rc)
 		return rc;
 
 	/* set 'enable' register */
 	return regmap_write(chgr->regmap,
-			    chgr->base_addr + QCOM_COINCELL_REG_ENABLE,
+			    QCOM_COINCELL_REG_ENABLE,
 			    QCOM_COINCELL_ENABLE);
 }
 
 static int qcom_coincell_probe(struct platform_device *pdev)
 {
-	struct device_node *node = pdev->dev.of_node;
+	struct regmap_config qcom_coincell_regmap_config = {
+		.reg_bits = 16,
+		.val_bits = 8,
+		.max_register = 0x100,
+		.fast_io = true,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct spmi_subdevice *sub_sdev;
+	struct spmi_device *sparent;
 	struct qcom_coincell chgr;
 	u32 rset = 0;
 	u32 vset = 0;
@@ -92,16 +101,22 @@ static int qcom_coincell_probe(struct platform_device *pdev)
 
 	chgr.dev = &pdev->dev;
 
-	chgr.regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	rc = of_property_read_u32(node, "reg", &qcom_coincell_regmap_config.reg_base);
+	if (rc)
+		return rc;
+
+	sparent = to_spmi_device(dev->parent);
+	sub_sdev = devm_spmi_subdevice_alloc_and_add(dev, sparent);
+	if (IS_ERR(sub_sdev))
+		return PTR_ERR(sub_sdev);
+
+	chgr.regmap = devm_regmap_init_spmi_ext(&sub_sdev->sdev,
+						&qcom_coincell_regmap_config);
 	if (!chgr.regmap) {
 		dev_err(chgr.dev, "Unable to get regmap\n");
 		return -EINVAL;
 	}
 
-	rc = of_property_read_u32(node, "reg", &chgr.base_addr);
-	if (rc)
-		return rc;
-
 	enable = !of_property_read_bool(node, "qcom,charger-disable");
 
 	if (enable) {
@@ -142,3 +157,4 @@ module_platform_driver(qcom_coincell_driver);
 
 MODULE_DESCRIPTION("Qualcomm PMIC coincell charger driver");
 MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS("SPMI");
-- 
2.50.1

Re: [PATCH v3 5/7] misc: qcom-coincell: Migrate to devm_spmi_subdevice_alloc_and_add()

[kernel test robot]

Hi AngeloGioacchino,

kernel test robot noticed the following build errors:

[auto build test ERROR on next-20250730]
[cannot apply to jic23-iio/togreg sre-power-supply/for-next char-misc/char-misc-testing char-misc/char-misc-next char-misc/char-misc-linus linus/master v6.16 v6.16-rc7 v6.16-rc6 v6.16]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/AngeloGioacchino-Del-Regno/spmi-Implement-spmi_subdevice_alloc_and_add-and-devm-variant/20250730-193217
base:   next-20250730
patch link:    https://lore.kernel.org/r/20250730112645.542179-6-angelogioacchino.delregno%40collabora.com
patch subject: [PATCH v3 5/7] misc: qcom-coincell: Migrate to devm_spmi_subdevice_alloc_and_add()
config: arm64-randconfig-002-20250731 (https://download.01.org/0day-ci/archive/20250731/202507311446.eqv2ucNm-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.4.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250731/202507311446.eqv2ucNm-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202507311446.eqv2ucNm-lkp@intel.com/

All errors (new ones prefixed by >>):

   aarch64-linux-ld: Unexpected GOT/PLT entries detected!
   aarch64-linux-ld: Unexpected run-time procedure linkages detected!
   aarch64-linux-ld: drivers/phy/qualcomm/phy-qcom-eusb2-repeater.o: in function `eusb2_repeater_probe':
   drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c:228:(.text+0x5a8): undefined reference to `devm_spmi_subdevice_alloc_and_add'
   aarch64-linux-ld: drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c:236:(.text+0x61c): undefined reference to `__devm_regmap_init_spmi_ext'
   aarch64-linux-ld: drivers/misc/qcom-coincell.o: in function `qcom_coincell_probe':
   drivers/misc/qcom-coincell.c:109:(.text+0x10c): undefined reference to `devm_spmi_subdevice_alloc_and_add'
>> aarch64-linux-ld: drivers/misc/qcom-coincell.c:113:(.text+0x14c): undefined reference to `__devm_regmap_init_spmi_ext'

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

[PATCH v3 6/7] iio: adc: qcom-spmi-iadc: Migrate to devm_spmi_subdevice_alloc_and_add()

[AngeloGioacchino Del Regno]

Some Qualcomm PMICs integrate an Current ADC device, reachable
in a specific address range over SPMI.

Instead of using the parent SPMI device (the main PMIC) as a kind
of syscon in this driver, register a new SPMI sub-device and
initialize its own regmap with this sub-device's specific base
address, retrieved from the devicetree.

This allows to stop manually adding the register base address to
every R/W call in this driver, as this can be, and is now, handled
by the regmap API instead.

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/r/20250722101317.76729-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/iio/adc/qcom-spmi-iadc.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-iadc.c b/drivers/iio/adc/qcom-spmi-iadc.c
index b64a8a407168..67096952b229 100644
--- a/drivers/iio/adc/qcom-spmi-iadc.c
+++ b/drivers/iio/adc/qcom-spmi-iadc.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/spmi.h>
 
 /* IADC register and bit definition */
 #define IADC_REVISION2				0x1
@@ -94,7 +95,6 @@
  * struct iadc_chip - IADC Current ADC device structure.
  * @regmap: regmap for register read/write.
  * @dev: This device pointer.
- * @base: base offset for the ADC peripheral.
  * @rsense: Values of the internal and external sense resister in micro Ohms.
  * @poll_eoc: Poll for end of conversion instead of waiting for IRQ.
  * @offset: Raw offset values for the internal and external channels.
@@ -105,7 +105,6 @@
 struct iadc_chip {
 	struct regmap	*regmap;
 	struct device	*dev;
-	u16		base;
 	bool		poll_eoc;
 	u32		rsense[2];
 	u16		offset[2];
@@ -119,7 +118,7 @@ static int iadc_read(struct iadc_chip *iadc, u16 offset, u8 *data)
 	unsigned int val;
 	int ret;
 
-	ret = regmap_read(iadc->regmap, iadc->base + offset, &val);
+	ret = regmap_read(iadc->regmap, offset, &val);
 	if (ret < 0)
 		return ret;
 
@@ -129,7 +128,7 @@ static int iadc_read(struct iadc_chip *iadc, u16 offset, u8 *data)
 
 static int iadc_write(struct iadc_chip *iadc, u16 offset, u8 data)
 {
-	return regmap_write(iadc->regmap, iadc->base + offset, data);
+	return regmap_write(iadc->regmap, offset, data);
 }
 
 static int iadc_reset(struct iadc_chip *iadc)
@@ -270,7 +269,7 @@ static int iadc_poll_wait_eoc(struct iadc_chip *iadc, unsigned int interval_us)
 
 static int iadc_read_result(struct iadc_chip *iadc, u16 *data)
 {
-	return regmap_bulk_read(iadc->regmap, iadc->base + IADC_DATA, data, 2);
+	return regmap_bulk_read(iadc->regmap, IADC_DATA, data, 2);
 }
 
 static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
@@ -483,12 +482,19 @@ static const struct iio_chan_spec iadc_channels[] = {
 
 static int iadc_probe(struct platform_device *pdev)
 {
+	struct regmap_config iadc_regmap_config = {
+		.reg_bits = 16,
+		.val_bits = 8,
+		.max_register = 0x100,
+		.fast_io = true,
+	};
 	struct device_node *node = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
+	struct spmi_subdevice *sub_sdev;
+	struct spmi_device *sparent;
 	struct iio_dev *indio_dev;
 	struct iadc_chip *iadc;
 	int ret, irq_eoc;
-	u32 res;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*iadc));
 	if (!indio_dev)
@@ -497,18 +503,21 @@ static int iadc_probe(struct platform_device *pdev)
 	iadc = iio_priv(indio_dev);
 	iadc->dev = dev;
 
-	iadc->regmap = dev_get_regmap(dev->parent, NULL);
-	if (!iadc->regmap)
-		return -ENODEV;
+	sparent = to_spmi_device(dev->parent);
+	sub_sdev = devm_spmi_subdevice_alloc_and_add(dev, sparent);
+	if (IS_ERR(sub_sdev))
+		return PTR_ERR(sub_sdev);
 
 	init_completion(&iadc->complete);
 	mutex_init(&iadc->lock);
 
-	ret = of_property_read_u32(node, "reg", &res);
+	ret = of_property_read_u32(node, "reg", &iadc_regmap_config.reg_base);
 	if (ret < 0)
 		return -ENODEV;
 
-	iadc->base = res;
+	iadc->regmap = devm_regmap_init_spmi_ext(&sub_sdev->sdev, &iadc_regmap_config);
+	if (IS_ERR(iadc->regmap))
+		return PTR_ERR(iadc->regmap);
 
 	ret = iadc_version_check(iadc);
 	if (ret < 0)
@@ -584,3 +593,4 @@ MODULE_ALIAS("platform:qcom-spmi-iadc");
 MODULE_DESCRIPTION("Qualcomm SPMI PMIC current ADC driver");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
+MODULE_IMPORT_NS("SPMI");
-- 
2.50.1

[PATCH v3 7/7] iio: adc: qcom-spmi-iadc: Remove regmap R/W wrapper functions

[AngeloGioacchino Del Regno]

This driver doesn't need to add any register base address to any
regmap call anymore since it was migrated to register as a SPMI
subdevice with its own regmap reg_base, which makes the regmap
API to automatically add such base address internally.

Since the iadc_{read,write,read_result}() functions now only do
call regmap_{read,write,bulk_read}() and nothing else, simplify
the driver by removing them and by calling regmap APIs directly.

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/r/20250722101317.76729-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/iio/adc/qcom-spmi-iadc.c | 83 ++++++++++++--------------------
 1 file changed, 30 insertions(+), 53 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-iadc.c b/drivers/iio/adc/qcom-spmi-iadc.c
index 67096952b229..7d46ec2d1a30 100644
--- a/drivers/iio/adc/qcom-spmi-iadc.c
+++ b/drivers/iio/adc/qcom-spmi-iadc.c
@@ -113,77 +113,59 @@ struct iadc_chip {
 	struct completion complete;
 };
 
-static int iadc_read(struct iadc_chip *iadc, u16 offset, u8 *data)
-{
-	unsigned int val;
-	int ret;
-
-	ret = regmap_read(iadc->regmap, offset, &val);
-	if (ret < 0)
-		return ret;
-
-	*data = val;
-	return 0;
-}
-
-static int iadc_write(struct iadc_chip *iadc, u16 offset, u8 data)
-{
-	return regmap_write(iadc->regmap, offset, data);
-}
-
 static int iadc_reset(struct iadc_chip *iadc)
 {
-	u8 data;
+	u32 data;
 	int ret;
 
-	ret = iadc_write(iadc, IADC_SEC_ACCESS, IADC_SEC_ACCESS_DATA);
+	ret = regmap_write(iadc->regmap, IADC_SEC_ACCESS, IADC_SEC_ACCESS_DATA);
 	if (ret < 0)
 		return ret;
 
-	ret = iadc_read(iadc, IADC_PERH_RESET_CTL3, &data);
+	ret = regmap_read(iadc->regmap, IADC_PERH_RESET_CTL3, &data);
 	if (ret < 0)
 		return ret;
 
-	ret = iadc_write(iadc, IADC_SEC_ACCESS, IADC_SEC_ACCESS_DATA);
+	ret = regmap_write(iadc->regmap, IADC_SEC_ACCESS, IADC_SEC_ACCESS_DATA);
 	if (ret < 0)
 		return ret;
 
 	data |= IADC_FOLLOW_WARM_RB;
 
-	return iadc_write(iadc, IADC_PERH_RESET_CTL3, data);
+	return regmap_write(iadc->regmap, IADC_PERH_RESET_CTL3, data);
 }
 
 static int iadc_set_state(struct iadc_chip *iadc, bool state)
 {
-	return iadc_write(iadc, IADC_EN_CTL1, state ? IADC_EN_CTL1_SET : 0);
+	return regmap_write(iadc->regmap, IADC_EN_CTL1, state ? IADC_EN_CTL1_SET : 0);
 }
 
 static void iadc_status_show(struct iadc_chip *iadc)
 {
-	u8 mode, sta1, chan, dig, en, req;
+	u32 mode, sta1, chan, dig, en, req;
 	int ret;
 
-	ret = iadc_read(iadc, IADC_MODE_CTL, &mode);
+	ret = regmap_read(iadc->regmap, IADC_MODE_CTL, &mode);
 	if (ret < 0)
 		return;
 
-	ret = iadc_read(iadc, IADC_DIG_PARAM, &dig);
+	ret = regmap_read(iadc->regmap, IADC_DIG_PARAM, &dig);
 	if (ret < 0)
 		return;
 
-	ret = iadc_read(iadc, IADC_CH_SEL_CTL, &chan);
+	ret = regmap_read(iadc->regmap, IADC_CH_SEL_CTL, &chan);
 	if (ret < 0)
 		return;
 
-	ret = iadc_read(iadc, IADC_CONV_REQ, &req);
+	ret = regmap_read(iadc->regmap, IADC_CONV_REQ, &req);
 	if (ret < 0)
 		return;
 
-	ret = iadc_read(iadc, IADC_STATUS1, &sta1);
+	ret = regmap_read(iadc->regmap, IADC_STATUS1, &sta1);
 	if (ret < 0)
 		return;
 
-	ret = iadc_read(iadc, IADC_EN_CTL1, &en);
+	ret = regmap_read(iadc->regmap, IADC_EN_CTL1, &en);
 	if (ret < 0)
 		return;
 
@@ -199,34 +181,34 @@ static int iadc_configure(struct iadc_chip *iadc, int channel)
 
 	/* Mode selection */
 	mode = (IADC_OP_MODE_NORMAL << IADC_OP_MODE_SHIFT) | IADC_TRIM_EN;
-	ret = iadc_write(iadc, IADC_MODE_CTL, mode);
+	ret = regmap_write(iadc->regmap, IADC_MODE_CTL, mode);
 	if (ret < 0)
 		return ret;
 
 	/* Channel selection */
-	ret = iadc_write(iadc, IADC_CH_SEL_CTL, channel);
+	ret = regmap_write(iadc->regmap, IADC_CH_SEL_CTL, channel);
 	if (ret < 0)
 		return ret;
 
 	/* Digital parameter setup */
 	decim = IADC_DEF_DECIMATION << IADC_DIG_DEC_RATIO_SEL_SHIFT;
-	ret = iadc_write(iadc, IADC_DIG_PARAM, decim);
+	ret = regmap_write(iadc->regmap, IADC_DIG_PARAM, decim);
 	if (ret < 0)
 		return ret;
 
 	/* HW settle time delay */
-	ret = iadc_write(iadc, IADC_HW_SETTLE_DELAY, IADC_DEF_HW_SETTLE_TIME);
+	ret = regmap_write(iadc->regmap, IADC_HW_SETTLE_DELAY, IADC_DEF_HW_SETTLE_TIME);
 	if (ret < 0)
 		return ret;
 
-	ret = iadc_write(iadc, IADC_FAST_AVG_CTL, IADC_DEF_AVG_SAMPLES);
+	ret = regmap_write(iadc->regmap, IADC_FAST_AVG_CTL, IADC_DEF_AVG_SAMPLES);
 	if (ret < 0)
 		return ret;
 
 	if (IADC_DEF_AVG_SAMPLES)
-		ret = iadc_write(iadc, IADC_FAST_AVG_EN, IADC_FAST_AVG_EN_SET);
+		ret = regmap_write(iadc->regmap, IADC_FAST_AVG_EN, IADC_FAST_AVG_EN_SET);
 	else
-		ret = iadc_write(iadc, IADC_FAST_AVG_EN, 0);
+		ret = regmap_write(iadc->regmap, IADC_FAST_AVG_EN, 0);
 
 	if (ret < 0)
 		return ret;
@@ -239,19 +221,19 @@ static int iadc_configure(struct iadc_chip *iadc, int channel)
 		return ret;
 
 	/* Request conversion */
-	return iadc_write(iadc, IADC_CONV_REQ, IADC_CONV_REQ_SET);
+	return regmap_write(iadc->regmap, IADC_CONV_REQ, IADC_CONV_REQ_SET);
 }
 
 static int iadc_poll_wait_eoc(struct iadc_chip *iadc, unsigned int interval_us)
 {
 	unsigned int count, retry;
 	int ret;
-	u8 sta1;
+	u32 sta1;
 
 	retry = interval_us / IADC_CONV_TIME_MIN_US;
 
 	for (count = 0; count < retry; count++) {
-		ret = iadc_read(iadc, IADC_STATUS1, &sta1);
+		ret = regmap_read(iadc->regmap, IADC_STATUS1, &sta1);
 		if (ret < 0)
 			return ret;
 
@@ -267,11 +249,6 @@ static int iadc_poll_wait_eoc(struct iadc_chip *iadc, unsigned int interval_us)
 	return -ETIMEDOUT;
 }
 
-static int iadc_read_result(struct iadc_chip *iadc, u16 *data)
-{
-	return regmap_bulk_read(iadc->regmap, IADC_DATA, data, 2);
-}
-
 static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
 {
 	unsigned int wait;
@@ -296,7 +273,7 @@ static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
 	}
 
 	if (!ret)
-		ret = iadc_read_result(iadc, data);
+		ret = regmap_bulk_read(iadc->regmap, IADC_DATA, data, sizeof(*data));
 exit:
 	iadc_set_state(iadc, false);
 	if (ret < 0)
@@ -392,10 +369,10 @@ static int iadc_update_offset(struct iadc_chip *iadc)
 
 static int iadc_version_check(struct iadc_chip *iadc)
 {
-	u8 val;
+	u32 val;
 	int ret;
 
-	ret = iadc_read(iadc, IADC_PERPH_TYPE, &val);
+	ret = regmap_read(iadc->regmap, IADC_PERPH_TYPE, &val);
 	if (ret < 0)
 		return ret;
 
@@ -404,7 +381,7 @@ static int iadc_version_check(struct iadc_chip *iadc)
 		return -EINVAL;
 	}
 
-	ret = iadc_read(iadc, IADC_PERPH_SUBTYPE, &val);
+	ret = regmap_read(iadc->regmap, IADC_PERPH_SUBTYPE, &val);
 	if (ret < 0)
 		return ret;
 
@@ -413,7 +390,7 @@ static int iadc_version_check(struct iadc_chip *iadc)
 		return -EINVAL;
 	}
 
-	ret = iadc_read(iadc, IADC_REVISION2, &val);
+	ret = regmap_read(iadc->regmap, IADC_REVISION2, &val);
 	if (ret < 0)
 		return ret;
 
@@ -428,7 +405,7 @@ static int iadc_version_check(struct iadc_chip *iadc)
 static int iadc_rsense_read(struct iadc_chip *iadc, struct device_node *node)
 {
 	int ret, sign, int_sense;
-	u8 deviation;
+	u32 deviation;
 
 	ret = of_property_read_u32(node, "qcom,external-resistor-micro-ohms",
 				   &iadc->rsense[IADC_EXT_RSENSE]);
@@ -440,7 +417,7 @@ static int iadc_rsense_read(struct iadc_chip *iadc, struct device_node *node)
 		return -EINVAL;
 	}
 
-	ret = iadc_read(iadc, IADC_NOMINAL_RSENSE, &deviation);
+	ret = regmap_read(iadc->regmap, IADC_NOMINAL_RSENSE, &deviation);
 	if (ret < 0)
 		return ret;
 
-- 
2.50.1

Re: [PATCH v3 0/7] SPMI: Implement sub-devices and migrate drivers

[neil.armstrong]

On 30/07/2025 13:26, AngeloGioacchino Del Regno wrote:
> Changes in v3:
>   - Fixed importing "SPMI" namespace in spmi-devres.c
>   - Removed all instances of defensive programming, as pointed out by
>     jic23 and Sebastian
>   - Removed explicit casting as pointed out by jic23
>   - Moved ida_free call to spmi_subdev_release() and simplified error
>     handling in spmi_subdevice_alloc_and_add() as pointed out by jic23
> 
> Changes in v2:
>   - Fixed missing `sparent` initialization in phy-qcom-eusb2-repeater
>   - Changed val_bits to 8 in all Qualcomm drivers to ensure
>     compatibility as suggested by Casey
>   - Added struct device pointer in all conversion commits as suggested
>     by Andy
>   - Exported newly introduced functions with a new "SPMI" namespace
>     and imported the same in all converted drivers as suggested by Andy
>   - Added missing error checking for dev_set_name() call in spmi.c
>     as suggested by Andy
>   - Added comma to last entry of regmap_config as suggested by Andy
> 
> While adding support for newer MediaTek platforms, featuring complex
> SPMI PMICs, I've seen that those SPMI-connected chips are internally
> divided in various IP blocks, reachable in specific contiguous address
> ranges... more or less like a MMIO, but over a slow SPMI bus instead.
> 
> I recalled that Qualcomm had something similar... and upon checking a
> couple of devicetrees, yeah - indeed it's the same over there.
> 
> What I've seen then is a common pattern of reading the "reg" property
> from devicetree in a struct member and then either
>   A. Wrapping regmap_{read/write/etc}() calls in a function that adds
>      the register base with "base + ..register", like it's done with
>      writel()/readl() calls; or
>   B. Doing the same as A. but without wrapper functions.
> 
> Even though that works just fine, in my opinion it's wrong.
> 
> The regmap API is way more complex than MMIO-only readl()/writel()
> functions for multiple reasons (including supporting multiple busses
> like SPMI, of course) - but everyone seemed to forget that regmap
> can manage register base offsets transparently and automatically in
> its API functions by simply adding a `reg_base` to the regmap_config
> structure, which is used for initializing a `struct regmap`.
> 
> So, here we go: this series implements the software concept of an SPMI
> Sub-Device (which, well, also reflects how Qualcomm and MediaTek's
> actual hardware is laid out anyway).
> 
>                 SPMI Controller
>                       |                ______
>                       |               /       Sub-Device 1
>                       V              /
>                SPMI Device (PMIC) ----------- Sub-Device 2
>                                      \
>                                       \______ Sub-Device 3
> 
> As per this implementation, an SPMI Sub-Device can be allocated/created
> and added in any driver that implements a... well.. subdevice (!) with
> an SPMI "main" device as its parent: this allows to create and finally
> to correctly configure a regmap that is specific to the sub-device,
> operating on its specific address range and reading, and writing, to
> its registers with the regmap API taking care of adding the base address
> of a sub-device's registers as per regmap API design.
> 
> All of the SPMI Sub-Devices are therefore added as children of the SPMI
> Device (usually a PMIC), as communication depends on the PMIC's SPMI bus
> to be available (and the PMIC to be up and running, of course).
> 
> Summarizing the dependency chain (which is obvious to whoever knows what
> is going on with Qualcomm and/or MediaTek SPMI PMICs):
>      "SPMI Sub-Device x...N" are children "SPMI Device"
>      "SPMI Device" is a child of "SPMI Controller"
> 
> (that was just another way to say the same thing as the graph above anyway).
> 
> Along with the new SPMI Sub-Device registration functions, I have also
> performed a conversion of some Qualcomm SPMI drivers and only where the
> actual conversion was trivial.
> 
> I haven't included any conversion of more complex Qualcomm SPMI drivers
> because I don't have the required bandwidth to do so (and besides, I think,
> but haven't exactly verified, that some of those require SoCs that I don't
> have for testing anyway).
> 
> AngeloGioacchino Del Regno (7):
>    spmi: Implement spmi_subdevice_alloc_and_add() and devm variant
>    nvmem: qcom-spmi-sdam: Migrate to devm_spmi_subdevice_alloc_and_add()
>    power: reset: qcom-pon: Migrate to devm_spmi_subdevice_alloc_and_add()
>    phy: qualcomm: eusb2-repeater: Migrate to
>      devm_spmi_subdevice_alloc_and_add()
>    misc: qcom-coincell: Migrate to devm_spmi_subdevice_alloc_and_add()
>    iio: adc: qcom-spmi-iadc: Migrate to
>      devm_spmi_subdevice_alloc_and_add()
>    iio: adc: qcom-spmi-iadc: Remove regmap R/W wrapper functions
> 
>   drivers/iio/adc/qcom-spmi-iadc.c              | 109 ++++++++----------
>   drivers/misc/qcom-coincell.c                  |  38 ++++--
>   drivers/nvmem/qcom-spmi-sdam.c                |  37 ++++--
>   .../phy/qualcomm/phy-qcom-eusb2-repeater.c    |  51 +++++---
>   drivers/power/reset/qcom-pon.c                |  34 ++++--
>   drivers/spmi/spmi-devres.c                    |  24 ++++
>   drivers/spmi/spmi.c                           |  79 +++++++++++++
>   include/linux/spmi.h                          |  16 +++
>   8 files changed, 278 insertions(+), 110 deletions(-)
> 

Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD

Tested patch 1, 2, 3 & 4, I can see the :
/sys/kernel/debug/regmap/0-00.0.auto
/sys/kernel/debug/regmap/0-00.1.auto
/sys/kernel/debug/regmap/0-07.2.auto

And it still functional.

Neil