From: Kevin Hilman <khilman@baylibre.com>
To: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>,
"Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com>
Cc: Vishal Mahaveer <vishalm@ti.com>, Dhruva Gole <d-gole@ti.com>,
Sebin Francis <sebin.francis@ti.com>,
Kendall Willis <k-willis@ti.com>, Akashdeep Kaur <a-kaur@ti.com>,
linux-kernel@vger.kernel.org,
"Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com>
Subject: Re: [PATCH v4 0/3] clocksource/drivers/timer-ti-dm: Add clocksource and clockevent support
Date: Thu, 23 Apr 2026 10:55:27 -0700 [thread overview]
Message-ID: <7ha4utr27k.fsf@baylibre.com> (raw)
In-Reply-To: <20260309-topic-ti-dm-clkevt-v6-16-v4-0-bb8d2a04c45e@baylibre.com>
[ off list ]
"Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com> writes:
> Hi,
>
> this series adds support for both clocksource and clockevent to the TI
> Dual-Mode Timer driver. This can be used as a time source for low power
> modes in which the CPUs are temporarily not running.
>
> The driver looks for two always on timers in the DT to be used for
> clocksource and clockevent. These are then handled as reserved and can
> not be used for normal use.
>
> This series is based on v7.0-rc1.
>
> Best
> Markus
>
> Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
> ---
> Changes in v4:
> - Rebased onto v7.0
> - Link to v3: https://lore.kernel.org/r/20260204-topic-ti-dm-clkevt-v6-16-v3-0-83e65d01f4ae@baylibre.com
>
> Changes in v3:
> - Use devm_add_action_or_reset() to cleanup clocksource registration
> - Use RESOURCE_SIZE_MAX instead of -1 if no timers suitable for
> clocksource or clockevent were found
> - Link to v2: https://lore.kernel.org/r/20251216-topic-ti-dm-clkevt-v6-16-v2-0-bfd7dd085c19@baylibre.com
>
> Changes in v2:
> - Rebased to v6.19-rc1
> - Previous compile issues because of the __init section of
> sched_clock_register() was solved upstream by removing it from the
> __init section in
> https://lore.kernel.org/r/20250602151853.1942521-8-daniel.lezcano@linaro.org
> - Link to v1: https://lore.kernel.org/r/20250623-topic-ti-dm-clkevt-v6-16-v1-0-b00086761ee1@baylibre.com
>
> ---
> Markus Schneider-Pargmann (TI.com) (3):
> clocksource/drivers/timer-ti-dm: Fix property name in comment
> clocksource/drivers/timer-ti-dm: Add clocksource support
> clocksource/drivers/timer-ti-dm: Add clockevent support
>
> drivers/clocksource/timer-ti-dm-systimer.c | 2 +-
> drivers/clocksource/timer-ti-dm.c | 265 +++++++++++++++++++++++++++++
> 2 files changed, 266 insertions(+), 1 deletion(-)
> ---
> base-commit: 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
> change-id: 20250623-topic-ti-dm-clkevt-v6-16-b5e6599b7c01
>
> Best regards,
> --
> Markus Schneider-Pargmann (TI) <msp@baylibre.com>
next prev parent reply other threads:[~2026-04-23 17:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-09 10:45 [PATCH v4 0/3] clocksource/drivers/timer-ti-dm: Add clocksource and clockevent support Markus Schneider-Pargmann (TI.com)
2026-03-09 10:45 ` [PATCH v4 1/3] clocksource/drivers/timer-ti-dm: Fix property name in comment Markus Schneider-Pargmann (TI.com)
2026-03-09 10:45 ` [PATCH v4 2/3] clocksource/drivers/timer-ti-dm: Add clocksource support Markus Schneider-Pargmann (TI.com)
2026-03-09 10:45 ` [PATCH v4 3/3] clocksource/drivers/timer-ti-dm: Add clockevent support Markus Schneider-Pargmann (TI.com)
2026-04-23 17:55 ` Kevin Hilman [this message]
2026-04-23 17:58 ` [PATCH v4 0/3] clocksource/drivers/timer-ti-dm: Add clocksource and " Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7ha4utr27k.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=a-kaur@ti.com \
--cc=d-gole@ti.com \
--cc=daniel.lezcano@oss.qualcomm.com \
--cc=k-willis@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=msp@baylibre.com \
--cc=sebin.francis@ti.com \
--cc=vishalm@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox