* IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] [not found] <5369063f.4291420a.03aa.495e@mx.google.com> @ 2014-05-07 14:20 ` Jason Cooper 2014-05-07 14:31 ` Corey Minyard 2014-05-07 14:44 ` Arnd Bergmann 0 siblings, 2 replies; 8+ messages in thread From: Jason Cooper @ 2014-05-07 14:20 UTC (permalink / raw) To: Kevin's boot bot, Corey Minyard, Thomas Petazzoni, Gregory CLEMENT, Ezequiel Garcia Cc: kernel-build-reports, linaro-kernel, openipmi-developer, linux-kernel, Andrew Lunn, Sebastian Hesselbarth Cory, all, On our ARM boot farm, we've started seeing the following: On Tue, May 06, 2014 at 08:56:47AM -0700, Kevin's boot bot wrote: > > Tree/Branch: stable > Git describe: v3.10.39 > Failed boot tests (console logs at the end) > =========================================== > da850-evm: FAIL: arm-davinci_all_defconfig > armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig > armada-370-mirabox: FAIL: arm-multi_v7_defconfig > sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig > ... > arm-multi_v7_defconfig > ---------------------- > > armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: > ------------------------------------------------------------ > > pps_core: LinuxPPS API ver. 1 registered > pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> > PTP clock support registered > EDAC MC: Ver: 3.0.0 > Switching to clocksource armada_370_xp_clocksource > bounce pool size: 64 pages > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver > ipmi message handler version 39.2 > IPMI System Interface driver. > ipmi_si: Adding default-specified kcs state machine > ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 > ipmi_si: Could not set up I/O space > Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> > Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> > ipmi_si: Adding default-specified smic state machine > ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 > ipmi_si: Could not set up I/O space > Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> > Trying to free nonexistent resource <0000000000000caa-0000000000000caa> > Trying to free nonexistent resource <0000000000000cab-0000000000000cab> > ipmi_si: Adding default-specified bt state machine > ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 > ipmi_si: Could not set up I/O space > Trying to free nonexistent resource <00000000000000e4-00000000000000e4> > Trying to free nonexistent resource <00000000000000e5-00000000000000e5> > Trying to free nonexistent resource <00000000000000e6-00000000000000e6> > ipmi_si: Unable to find any System Interface(s) > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled ... It appears to be unrelated to the failure this original message was about. However, the failure brought the above to our attention. :) Is the IPMI driver used on ARM? Documentation/IPMI.txt indicates a dependency on ACPI, but that isn't reflected in the Kconfig. At any rate, it seems rather unhappy. :( thx, Jason. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] 2014-05-07 14:20 ` IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] Jason Cooper @ 2014-05-07 14:31 ` Corey Minyard 2014-05-07 15:12 ` Jason Cooper 2014-05-07 14:44 ` Arnd Bergmann 1 sibling, 1 reply; 8+ messages in thread From: Corey Minyard @ 2014-05-07 14:31 UTC (permalink / raw) To: Jason Cooper, Kevin's boot bot, Thomas Petazzoni, Gregory CLEMENT, Ezequiel Garcia Cc: kernel-build-reports, linaro-kernel, openipmi-developer, linux-kernel, Andrew Lunn, Sebastian Hesselbarth You probably don't have an IPMI controller on your system. You can just remove the driver from the config. Kernel 3.15 will have the default probing removed, and you won't see these messages any more. -corey On 05/07/2014 09:20 AM, Jason Cooper wrote: > Cory, all, > > On our ARM boot farm, we've started seeing the following: > > On Tue, May 06, 2014 at 08:56:47AM -0700, Kevin's boot bot wrote: >> Tree/Branch: stable >> Git describe: v3.10.39 >> Failed boot tests (console logs at the end) >> =========================================== >> da850-evm: FAIL: arm-davinci_all_defconfig >> armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig >> armada-370-mirabox: FAIL: arm-multi_v7_defconfig >> sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig >> > ... >> arm-multi_v7_defconfig >> ---------------------- >> >> armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: >> ------------------------------------------------------------ >> >> pps_core: LinuxPPS API ver. 1 registered >> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> >> PTP clock support registered >> EDAC MC: Ver: 3.0.0 >> Switching to clocksource armada_370_xp_clocksource >> bounce pool size: 64 pages >> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) >> io scheduler noop registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver >> ipmi message handler version 39.2 >> IPMI System Interface driver. >> ipmi_si: Adding default-specified kcs state machine >> ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 >> ipmi_si: Could not set up I/O space >> Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> >> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> >> ipmi_si: Adding default-specified smic state machine >> ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 >> ipmi_si: Could not set up I/O space >> Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> >> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> >> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> >> ipmi_si: Adding default-specified bt state machine >> ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 >> ipmi_si: Could not set up I/O space >> Trying to free nonexistent resource <00000000000000e4-00000000000000e4> >> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> >> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> >> ipmi_si: Unable to find any System Interface(s) >> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > ... > > It appears to be unrelated to the failure this original message was > about. However, the failure brought the above to our attention. :) > > Is the IPMI driver used on ARM? Documentation/IPMI.txt indicates a > dependency on ACPI, but that isn't reflected in the Kconfig. At any > rate, it seems rather unhappy. :( > > thx, > > Jason. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] 2014-05-07 14:31 ` Corey Minyard @ 2014-05-07 15:12 ` Jason Cooper 0 siblings, 0 replies; 8+ messages in thread From: Jason Cooper @ 2014-05-07 15:12 UTC (permalink / raw) To: Corey Minyard Cc: Kevin's boot bot, Thomas Petazzoni, Gregory CLEMENT, Ezequiel Garcia, kernel-build-reports, linaro-kernel, openipmi-developer, linux-kernel, Andrew Lunn, Sebastian Hesselbarth Corey, On Wed, May 07, 2014 at 09:31:22AM -0500, Corey Minyard wrote: > You probably don't have an IPMI controller on your system. You can just > remove the driver from the config. Kernel 3.15 will have the default > probing removed, and you won't see these messages any more. ahh, here it is: 0dfe6e7ed47f ipmi: Turn off default probing of interfaces Since Arnd says it's possible to have this hardware on an ARM platform, I think backporting this fix may be appropriate. Although, it looks like the only ARM defconfig that selects this driver is mini2440_defconfig. So I'm uncertain how it gets turned on in multi_v7_defconfig, particularly for the v3.10.y stable tree... thx, Jason. > On 05/07/2014 09:20 AM, Jason Cooper wrote: > > Cory, all, > > > > On our ARM boot farm, we've started seeing the following: > > > > On Tue, May 06, 2014 at 08:56:47AM -0700, Kevin's boot bot wrote: > >> Tree/Branch: stable > >> Git describe: v3.10.39 > >> Failed boot tests (console logs at the end) > >> =========================================== > >> da850-evm: FAIL: arm-davinci_all_defconfig > >> armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig > >> armada-370-mirabox: FAIL: arm-multi_v7_defconfig > >> sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig > >> > > ... > >> arm-multi_v7_defconfig > >> ---------------------- > >> > >> armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: > >> ------------------------------------------------------------ > >> > >> pps_core: LinuxPPS API ver. 1 registered > >> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> > >> PTP clock support registered > >> EDAC MC: Ver: 3.0.0 > >> Switching to clocksource armada_370_xp_clocksource > >> bounce pool size: 64 pages > >> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > >> io scheduler noop registered > >> io scheduler deadline registered > >> io scheduler cfq registered (default) > >> armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver > >> ipmi message handler version 39.2 > >> IPMI System Interface driver. > >> ipmi_si: Adding default-specified kcs state machine > >> ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 > >> ipmi_si: Could not set up I/O space > >> Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> > >> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> > >> ipmi_si: Adding default-specified smic state machine > >> ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 > >> ipmi_si: Could not set up I/O space > >> Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> > >> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> > >> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> > >> ipmi_si: Adding default-specified bt state machine > >> ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 > >> ipmi_si: Could not set up I/O space > >> Trying to free nonexistent resource <00000000000000e4-00000000000000e4> > >> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> > >> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> > >> ipmi_si: Unable to find any System Interface(s) > >> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > > ... > > > > It appears to be unrelated to the failure this original message was > > about. However, the failure brought the above to our attention. :) > > > > Is the IPMI driver used on ARM? Documentation/IPMI.txt indicates a > > dependency on ACPI, but that isn't reflected in the Kconfig. At any > > rate, it seems rather unhappy. :( > > > > thx, > > > > Jason. > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] 2014-05-07 14:20 ` IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] Jason Cooper 2014-05-07 14:31 ` Corey Minyard @ 2014-05-07 14:44 ` Arnd Bergmann 2014-05-07 14:56 ` Jason Cooper 1 sibling, 1 reply; 8+ messages in thread From: Arnd Bergmann @ 2014-05-07 14:44 UTC (permalink / raw) To: linaro-kernel Cc: Jason Cooper, Kevin's boot bot, Corey Minyard, Thomas Petazzoni, Gregory CLEMENT, Ezequiel Garcia, Andrew Lunn, kernel-build-reports, Sebastian Hesselbarth, linux-kernel, openipmi-developer On Wednesday 07 May 2014 10:20:56 Jason Cooper wrote: > > ipmi message handler version 39.2 > > IPMI System Interface driver. > > ipmi_si: Adding default-specified kcs state machine > > ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 > > ipmi_si: Could not set up I/O space > > Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> > > Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> > > ipmi_si: Adding default-specified smic state machine > > ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 > > ipmi_si: Could not set up I/O space > > Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> > > Trying to free nonexistent resource <0000000000000caa-0000000000000caa> > > Trying to free nonexistent resource <0000000000000cab-0000000000000cab> > > ipmi_si: Adding default-specified bt state machine > > ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 > > ipmi_si: Could not set up I/O space > > Trying to free nonexistent resource <00000000000000e4-00000000000000e4> > > Trying to free nonexistent resource <00000000000000e5-00000000000000e5> > > Trying to free nonexistent resource <00000000000000e6-00000000000000e6> > > ipmi_si: Unable to find any System Interface(s) > > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > ... > > It appears to be unrelated to the failure this original message was > about. However, the failure brought the above to our attention. > > Is the IPMI driver used on ARM? Documentation/IPMI.txt indicates a > dependency on ACPI, but that isn't reflected in the Kconfig. At any > rate, it seems rather unhappy. :( It certainly can be used, and it can be probed through a known PC-style port number or through the DT binding. However, we don't normally want it to try the PC style addresses, which appear to be used in this case. This should only happen if CONFIG_IPMI_SI_PROBE_DEFAULTS is set, as far as I can tell. Is that set in your configuration? Arnd ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] 2014-05-07 14:44 ` Arnd Bergmann @ 2014-05-07 14:56 ` Jason Cooper 2014-05-07 19:36 ` Kevin Hilman 0 siblings, 1 reply; 8+ messages in thread From: Jason Cooper @ 2014-05-07 14:56 UTC (permalink / raw) To: Arnd Bergmann Cc: linaro-kernel, Kevin's boot bot, Corey Minyard, Thomas Petazzoni, Gregory CLEMENT, Ezequiel Garcia, Andrew Lunn, kernel-build-reports, Sebastian Hesselbarth, linux-kernel, openipmi-developer On Wed, May 07, 2014 at 04:44:42PM +0200, Arnd Bergmann wrote: > On Wednesday 07 May 2014 10:20:56 Jason Cooper wrote: > > > ipmi message handler version 39.2 > > > IPMI System Interface driver. > > > ipmi_si: Adding default-specified kcs state machine > > > ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 > > > ipmi_si: Could not set up I/O space > > > Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> > > > Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> > > > ipmi_si: Adding default-specified smic state machine > > > ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 > > > ipmi_si: Could not set up I/O space > > > Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> > > > Trying to free nonexistent resource <0000000000000caa-0000000000000caa> > > > Trying to free nonexistent resource <0000000000000cab-0000000000000cab> > > > ipmi_si: Adding default-specified bt state machine > > > ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 > > > ipmi_si: Could not set up I/O space > > > Trying to free nonexistent resource <00000000000000e4-00000000000000e4> > > > Trying to free nonexistent resource <00000000000000e5-00000000000000e5> > > > Trying to free nonexistent resource <00000000000000e6-00000000000000e6> > > > ipmi_si: Unable to find any System Interface(s) > > > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > > ... > > > > It appears to be unrelated to the failure this original message was > > about. However, the failure brought the above to our attention. > > > > Is the IPMI driver used on ARM? Documentation/IPMI.txt indicates a > > dependency on ACPI, but that isn't reflected in the Kconfig. At any > > rate, it seems rather unhappy. :( > > It certainly can be used, and it can be probed through a known PC-style > port number or through the DT binding. > > However, we don't normally want it to try the PC style addresses, which > appear to be used in this case. This should only happen if > CONFIG_IPMI_SI_PROBE_DEFAULTS is set, as far as I can tell. Is that > set in your configuration? It's not set in multi_v7_defconfig, which is the config this failed under. At least not on linux-3.10.y. Kevin, do you still have the full config from this build? Could you send us the IPMI related settings? thx, Jason. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] 2014-05-07 14:56 ` Jason Cooper @ 2014-05-07 19:36 ` Kevin Hilman 2014-05-07 20:28 ` Jason Cooper 0 siblings, 1 reply; 8+ messages in thread From: Kevin Hilman @ 2014-05-07 19:36 UTC (permalink / raw) To: Jason Cooper Cc: Arnd Bergmann, linaro-kernel, Corey Minyard, Thomas Petazzoni, Gregory CLEMENT, Ezequiel Garcia, Andrew Lunn, kernel-build-reports, Sebastian Hesselbarth, linux-kernel, openipmi-developer Jason Cooper <jason@lakedaemon.net> writes: > On Wed, May 07, 2014 at 04:44:42PM +0200, Arnd Bergmann wrote: >> On Wednesday 07 May 2014 10:20:56 Jason Cooper wrote: >> > > ipmi message handler version 39.2 >> > > IPMI System Interface driver. >> > > ipmi_si: Adding default-specified kcs state machine >> > > ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 >> > > ipmi_si: Could not set up I/O space >> > > Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> >> > > Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> >> > > ipmi_si: Adding default-specified smic state machine >> > > ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 >> > > ipmi_si: Could not set up I/O space >> > > Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> >> > > Trying to free nonexistent resource <0000000000000caa-0000000000000caa> >> > > Trying to free nonexistent resource <0000000000000cab-0000000000000cab> >> > > ipmi_si: Adding default-specified bt state machine >> > > ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 >> > > ipmi_si: Could not set up I/O space >> > > Trying to free nonexistent resource <00000000000000e4-00000000000000e4> >> > > Trying to free nonexistent resource <00000000000000e5-00000000000000e5> >> > > Trying to free nonexistent resource <00000000000000e6-00000000000000e6> >> > > ipmi_si: Unable to find any System Interface(s) >> > > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >> > ... >> > >> > It appears to be unrelated to the failure this original message was >> > about. However, the failure brought the above to our attention. >> > >> > Is the IPMI driver used on ARM? Documentation/IPMI.txt indicates a >> > dependency on ACPI, but that isn't reflected in the Kconfig. At any >> > rate, it seems rather unhappy. :( >> >> It certainly can be used, and it can be probed through a known PC-style >> port number or through the DT binding. >> >> However, we don't normally want it to try the PC style addresses, which >> appear to be used in this case. This should only happen if >> CONFIG_IPMI_SI_PROBE_DEFAULTS is set, as far as I can tell. Is that >> set in your configuration? > > It's not set in multi_v7_defconfig, which is the config this failed > under. At least not on linux-3.10.y. > > Kevin, do you still have the full config from this build? Could you > send us the IPMI related settings? Below is the .config used for the multi_v7_defconfig build of v3.10.39 # # Automatically generated file; DO NOT EDIT. # Linux/arm 3.10.39 Kernel Configuration # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ZONE_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_GENERIC_BUG=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_FHANDLE is not set # CONFIG_AUDIT is not set CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_SPARSE_IRQ=y CONFIG_KTIME_SCALAR=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_ARCH_HAS_TICK_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set CONFIG_RCU_STALL_COMMON=y # CONFIG_RCU_USER_QS is not set CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_RCU_NOCB_CPU is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y # CONFIG_USER_NS is not set CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_UIDGID_CONVERTED=y # CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_HOTPLUG=y # CONFIG_EXPERT is not set CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # # CONFIG_PERF_EVENTS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y # CONFIG_JUMP_LABEL is not set # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_IDLE_POLL_SETUP=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y # # GCOV-based kernel profiling # CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_EFI_PARTITION=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # System Type # CONFIG_MMU=y CONFIG_ARCH_MULTIPLATFORM=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set # CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C24XX is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P64X0 is not set # CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_EXYNOS is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP1 is not set # # Multiple platform selection # # # CPU Core family selection # # CONFIG_ARCH_MULTI_V6 is not set CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_MULTI_V6_V7=y # CONFIG_ARCH_MULTI_CPU_AUTO is not set CONFIG_ARCH_MVEBU=y # # Marvell SOC with device tree # CONFIG_MACH_ARMADA_370_XP=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_XP=y # CONFIG_ARCH_BCM is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set CONFIG_ARCH_HIGHBANK=y # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_OMAP2PLUS is not set CONFIG_ARCH_SOCFPGA=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR13XX=y CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y # # CSR SiRF atlas6/primaII/Marco/Polo Specific Features # CONFIG_ARCH_ATLAS6=y CONFIG_ARCH_PRIMA2=y CONFIG_ARCH_MARCO=y CONFIG_SIRF_IRQ=y # CONFIG_ARCH_TEGRA is not set # CONFIG_ARCH_U8500 is not set # CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_VIRT is not set CONFIG_ARCH_VT8500=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y CONFIG_PLAT_ORION=y CONFIG_ARM_TIMER_SP804=y # # Processor Type # CONFIG_CPU_PJ4B=y CONFIG_CPU_V7=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y CONFIG_CPU_TLB_V7=y CONFIG_CPU_HAS_ASID=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y # # Processor Features # # CONFIG_ARM_LPAE is not set # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARM_THUMB=y # CONFIG_ARM_THUMBEE is not set CONFIG_ARM_VIRT_EXT=y CONFIG_SWP_EMULATE=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_KUSER_HELPERS=y CONFIG_OUTER_CACHE=y CONFIG_OUTER_CACHE_SYNC=y CONFIG_MIGHT_HAVE_CACHE_L2X0=y CONFIG_CACHE_L2X0=y CONFIG_CACHE_PL310=y CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_ARM_L1_CACHE_SHIFT=6 CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_ARM_NR_BANKS=8 CONFIG_MULTI_IRQ_HANDLER=y CONFIG_PJ4B_ERRATA_4742=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_PL310_ERRATA_588369 is not set # CONFIG_ARM_ERRATA_643719 is not set # CONFIG_ARM_ERRATA_720789 is not set # CONFIG_PL310_ERRATA_727915 is not set # CONFIG_PL310_ERRATA_753970 is not set CONFIG_ARM_ERRATA_754322=y # CONFIG_ARM_ERRATA_754327 is not set # CONFIG_ARM_ERRATA_764369 is not set # CONFIG_PL310_ERRATA_769419 is not set # CONFIG_ARM_ERRATA_775420 is not set # CONFIG_ARM_ERRATA_798181 is not set CONFIG_ICST=y # # Bus support # CONFIG_ARM_AMBA=y # CONFIG_PCI_SYSCALL is not set # CONFIG_PCCARD is not set # # Kernel Features # CONFIG_HAVE_SMP=y CONFIG_SMP=y CONFIG_SMP_ON_UP=y CONFIG_ARM_CPU_TOPOLOGY=y # CONFIG_SCHED_MC is not set # CONFIG_SCHED_SMT is not set CONFIG_HAVE_ARM_SCU=y # CONFIG_HAVE_ARM_ARCH_TIMER is not set CONFIG_HAVE_ARM_TWD=y # CONFIG_MCPM is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y # CONFIG_ARM_PSCI is not set CONFIG_LOCAL_TIMERS=y CONFIG_ARCH_NR_GPIO=352 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y # CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_HAVE_ARCH_PFN_VALID=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_HAVE_MEMBLOCK=y # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_CROSS_MEMORY_ATTACH=y # CONFIG_CLEANCACHE is not set # CONFIG_FRONTSWAP is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_XEN is not set # # Boot options # CONFIG_USE_OF=y CONFIG_ATAGS=y # CONFIG_DEPRECATED_PARAM_STRUCT is not set CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_ARM_APPENDED_DTB=y # CONFIG_ARM_ATAG_DTB_COMPAT is not set CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_AUTO_ZRELADDR=y # # CPU Power Management # # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set # # Floating point emulation # # # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set # CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COREDUMP=y # # Power management options # CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set # CONFIG_PM_RUNTIME is not set CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_APM_EMULATION is not set CONFIG_ARCH_HAS_OPP=y # CONFIG_PM_OPP is not set CONFIG_PM_CLK=y CONFIG_CPU_PM=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARM_CPU_SUSPEND=y CONFIG_NET=y # # Networking options # # CONFIG_PACKET is not set # CONFIG_UNIX is not set # CONFIG_NET_KEY is not set # CONFIG_INET is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_HAVE_NET_DSA=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_MMAP is not set # CONFIG_NETLINK_DIAG is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_BQL=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set # CONFIG_DMA_SHARED_BUFFER is not set # CONFIG_CMA is not set # # Bus devices # CONFIG_MVEBU_MBUS=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_DTC=y CONFIG_OF=y # # Device Tree and Open Firmware support # # CONFIG_PROC_DEVICETREE is not set # CONFIG_OF_SELFTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_NET=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # # DRBD disabled because PROC_FS or INET not selected # # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MG_DISK is not set # # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_AD525X_DPOT is not set # CONFIG_ATMEL_PWM is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_ICS932S401 is not set # CONFIG_ATMEL_SSC is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_BMP085_I2C is not set # CONFIG_BMP085_SPI is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_EEPROM_93XX46 is not set # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set # CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_LIS3_I2C is not set # # Altera FPGA firmware download module # # CONFIG_ALTERA_STAPL is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI_PLATFORM=y CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ARASAN_CF is not set # # PIO-only SFF controllers # # # Generic fallback / legacy drivers # # CONFIG_MD is not set # CONFIG_TARGET_CORE is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set CONFIG_MII=y # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_MV88E6060 is not set # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6131 is not set # CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_ETHERNET=y CONFIG_NET_CADENCE=y # CONFIG_ARM_AT91_ETHER is not set # CONFIG_MACB is not set CONFIG_NET_VENDOR_BROADCOM=y # CONFIG_B44 is not set CONFIG_NET_CALXEDA_XGMAC=y CONFIG_NET_VENDOR_CIRRUS=y # CONFIG_CS89x0 is not set # CONFIG_DM9000 is not set # CONFIG_DNET is not set CONFIG_NET_VENDOR_FARADAY=y # CONFIG_FTMAC100 is not set # CONFIG_FTGMAC100 is not set CONFIG_NET_VENDOR_INTEL=y CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_MARVELL=y # CONFIG_MVMDIO is not set # CONFIG_MVNETA is not set CONFIG_NET_VENDOR_MICREL=y # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set CONFIG_NET_VENDOR_MICROCHIP=y # CONFIG_ENC28J60 is not set CONFIG_NET_VENDOR_NATSEMI=y CONFIG_NET_VENDOR_8390=y # CONFIG_AX88796 is not set # CONFIG_ETHOC is not set CONFIG_NET_VENDOR_SEEQ=y CONFIG_NET_VENDOR_SMSC=y # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set CONFIG_SMSC911X=y # CONFIG_SMSC911X_ARCH_HOOKS is not set CONFIG_NET_VENDOR_STMICRO=y CONFIG_STMMAC_ETH=y CONFIG_STMMAC_PLATFORM=y # CONFIG_STMMAC_DA is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_AT803X_PHY is not set # CONFIG_AMD_PHY is not set # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_BCM87XX_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_MDIO_BUS_MUX_GPIO is not set # CONFIG_MDIO_BUS_MUX_MMIOREG is not set # CONFIG_MICREL_KS8995MA is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_RTL8152 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set CONFIG_WLAN=y # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # CONFIG_WL_TI is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set CONFIG_INPUT_MATRIXKMAP=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set CONFIG_KEYBOARD_SPEAR=y # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_CYAPA is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_MOUSE_SYNAPTICS_USB is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_SERIO_APBPS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set CONFIG_DEVKMEM=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_DW=y # CONFIG_SERIAL_8250_EM is not set # # Non-8250 serial port support # # CONFIG_SERIAL_AMBA_PL010 is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_SIRFSOC=y CONFIG_SERIAL_SIRFSOC_CONSOLE=y # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX310X is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_IFX6X60 is not set # CONFIG_SERIAL_XILINX_PS_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_HVC_DCC is not set CONFIG_IPMI_HANDLER=y # CONFIG_IPMI_PANIC_EVENT is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set CONFIG_IPMI_SI=y # CONFIG_IPMI_WATCHDOG is not set # CONFIG_IPMI_POWEROFF is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_ATMEL is not set # CONFIG_HW_RANDOM_EXYNOS is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y # CONFIG_I2C_GPIO is not set # CONFIG_I2C_MV64XXX is not set # CONFIG_I2C_NOMADIK is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set CONFIG_I2C_SIRF=y # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set CONFIG_SPI_BITBANG=y # CONFIG_SPI_GPIO is not set # CONFIG_SPI_FSL_SPI is not set # CONFIG_SPI_OC_TINY is not set # CONFIG_SPI_ORION is not set CONFIG_SPI_PL022=y # CONFIG_SPI_PXA2XX_PCI is not set # CONFIG_SPI_SC18IS602 is not set CONFIG_SPI_SIRF=y # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # # Qualcomm MSM SSBI bus support # # CONFIG_SSBI is not set # CONFIG_HSI is not set # # PPS support # CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set # CONFIG_PPS_CLIENT_LDISC is not set # CONFIG_PPS_CLIENT_GPIO is not set # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=y # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_PINCTRL=y # # Pin controllers # CONFIG_PINMUX=y CONFIG_PINCONF=y CONFIG_GENERIC_PINCONF=y # CONFIG_PINCTRL_SINGLE is not set CONFIG_PINCTRL_SIRF=y CONFIG_PINCTRL_SUNXI=y # CONFIG_PINCTRL_EXYNOS is not set # CONFIG_PINCTRL_EXYNOS5440 is not set CONFIG_PINCTRL_MVEBU=y CONFIG_PINCTRL_ARMADA_370=y CONFIG_PINCTRL_ARMADA_XP=y CONFIG_PINCTRL_SPEAR=y CONFIG_PINCTRL_SPEAR1310=y CONFIG_PINCTRL_SPEAR1340=y CONFIG_PINCTRL_SPEAR_PLGPIO=y # CONFIG_PINCTRL_WM8850 is not set CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_GPIOLIB=y CONFIG_OF_GPIO=y # CONFIG_GPIO_SYSFS is not set CONFIG_GPIO_GENERIC=y # # Memory mapped GPIO drivers: # # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_EM is not set CONFIG_GPIO_MVEBU=y CONFIG_GPIO_PL061=y # CONFIG_GPIO_RCAR is not set CONFIG_GPIO_SPEAR_SPICS=y # CONFIG_GPIO_TS5500 is not set # CONFIG_GPIO_GRGPIO is not set # # I2C GPIO expanders: # # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_SX150X is not set # CONFIG_GPIO_ADP5588 is not set # CONFIG_GPIO_ADNP is not set # # PCI GPIO expanders: # # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_74X164 is not set # # AC97 GPIO expanders: # # # MODULbus GPIO expanders: # # # USB GPIO expanders: # # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_POWER_AVS is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_AD7314 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7310 is not set # CONFIG_SENSORS_ADT7410 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_GPIO_FAN is not set # CONFIG_SENSORS_HIH6130 is not set # CONFIG_SENSORS_IBMAEM is not set # CONFIG_SENSORS_IBMPEX is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LM95234 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MAX6697 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH56XX_COMMON is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_AS3711 is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_AAT2870_CORE is not set # CONFIG_MFD_CROS_EC is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_I2CPLD is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_EZX_PCAP is not set # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_SMSC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS65910 is not set # CONFIG_MFD_TPS65912 is not set # CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS65912_SPI is not set # CONFIG_MFD_TPS80031 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_DRM is not set # CONFIG_TEGRA_HOST1X is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_VIDEOMODE_HELPERS=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # CONFIG_FB_ARMCLCD=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VT8500 is not set CONFIG_FB_WM8505=y # CONFIG_FB_WMT_GE_ROPS is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_GOLDFISH is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_AUO_K190X is not set # CONFIG_FB_SIMPLE is not set # CONFIG_EXYNOS_VIDEO is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # CONFIG_FB_SSD1307 is not set # CONFIG_SOUND is not set # # HID support # CONFIG_HID=y # CONFIG_HIDRAW is not set # CONFIG_UHID is not set CONFIG_HID_GENERIC=y # # Special HID drivers # CONFIG_HID_A4TECH=y # CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=y # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set # CONFIG_HID_ELECOM is not set CONFIG_HID_EZKEY=y # CONFIG_HID_HOLTEK is not set # CONFIG_HID_KEYTOUCH is not set # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_ICADE is not set # CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO_TPKBD is not set CONFIG_HID_LOGITECH=y # CONFIG_HID_LOGITECH_DJ is not set # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set # CONFIG_HID_MAGICMOUSE is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_PRIMAX is not set # CONFIG_HID_PS3REMOTE is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SPEEDLINK is not set # CONFIG_HID_STEELSERIES is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set # # USB HID support # CONFIG_USB_HID=y # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_ARCH_HAS_XHCI is not set CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_ISP1760_HCD=y # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC=y CONFIG_USB_UHCI_PLATFORM=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_DWC3 is not set # CONFIG_USB_CHIPIDEA is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set # CONFIG_USB_HSIC_USB3503 is not set # CONFIG_USB_PHY is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # CONFIG_MMC_CLKGATE is not set # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_MINORS=8 CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y # CONFIG_MMC_SDHCI_SIRF is not set # CONFIG_MMC_SDHCI_PXAV3 is not set # CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_SDHCI_SPEAR=y # CONFIG_MMC_MVSDIO is not set # CONFIG_MMC_DW is not set # CONFIG_MMC_VUB300 is not set # CONFIG_MMC_USHC is not set CONFIG_MMC_WMT=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_SYSTOHC=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_RX4581 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_DS2404 is not set CONFIG_RTC_DRV_SPEAR=y # # on-CPU RTC drivers # # CONFIG_RTC_DRV_PL030 is not set CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y # CONFIG_RTC_DRV_MV is not set # CONFIG_RTC_DRV_SNVS is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # # CONFIG_AMBA_PL08X is not set CONFIG_DW_DMAC=y # CONFIG_DW_DMAC_BIG_ENDIAN_IO is not set # CONFIG_MV_XOR is not set # CONFIG_TIMB_DMA is not set CONFIG_SIRF_DMA=y CONFIG_PL330_DMA=y CONFIG_DMA_ENGINE=y CONFIG_DMA_OF=y # # DMA Clients # # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_VIRT_DRIVERS is not set # # Virtio drivers # # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # # CONFIG_STAGING is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # # Common Clock Framework # # CONFIG_COMMON_CLK_DEBUG is not set # CONFIG_COMMON_CLK_SI5351 is not set # CONFIG_COMMON_CLK_AXI_CLKGEN is not set CONFIG_MVEBU_CLK_CORE=y CONFIG_MVEBU_CLK_CPU=y CONFIG_MVEBU_CLK_GATING=y # # Hardware Spinlock drivers # CONFIG_CLKSRC_OF=y CONFIG_CLKSRC_MMIO=y CONFIG_DW_APB_TIMER=y CONFIG_DW_APB_TIMER_OF=y CONFIG_ARMADA_370_XP_TIMER=y CONFIG_SUN4I_TIMER=y CONFIG_VT8500_TIMER=y CONFIG_CADENCE_TTC_TIMER=y CONFIG_MAILBOX=y CONFIG_PL320_MBOX=y CONFIG_IOMMU_SUPPORT=y CONFIG_OF_IOMMU=y # # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set # # Rpmsg drivers # # CONFIG_PM_DEVFREQ is not set # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set # CONFIG_IIO is not set CONFIG_PWM=y # CONFIG_PWM_SPEAR is not set CONFIG_PWM_VT8500=y CONFIG_IRQCHIP=y CONFIG_ARM_GIC=y # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_QUOTACTL is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_F2FS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set # CONFIG_NLS_UTF8 is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # # RCU Debugging # # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_STRICT_DEVMEM is not set CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" # CONFIG_OC_ETM is not set # CONFIG_PID_IN_CONTEXTIDR is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IO=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set # CONFIG_CRC8 is not set # CONFIG_XZ_DEC is not set # CONFIG_XZ_DEC_BCJ is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y # CONFIG_AVERAGE is not set # CONFIG_CORDIC is not set # CONFIG_DDR is not set # CONFIG_VIRTUALIZATION is not set ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] 2014-05-07 19:36 ` Kevin Hilman @ 2014-05-07 20:28 ` Jason Cooper 2014-05-07 20:31 ` Kevin Hilman 0 siblings, 1 reply; 8+ messages in thread From: Jason Cooper @ 2014-05-07 20:28 UTC (permalink / raw) To: Kevin Hilman Cc: Arnd Bergmann, linaro-kernel, Corey Minyard, Thomas Petazzoni, Gregory CLEMENT, Ezequiel Garcia, Andrew Lunn, kernel-build-reports, Sebastian Hesselbarth, linux-kernel, openipmi-developer On Wed, May 07, 2014 at 12:36:20PM -0700, Kevin Hilman wrote: > Jason Cooper <jason@lakedaemon.net> writes: > > > On Wed, May 07, 2014 at 04:44:42PM +0200, Arnd Bergmann wrote: > >> On Wednesday 07 May 2014 10:20:56 Jason Cooper wrote: > >> > > ipmi message handler version 39.2 > >> > > IPMI System Interface driver. > >> > > ipmi_si: Adding default-specified kcs state machine > >> > > ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 > >> > > ipmi_si: Could not set up I/O space > >> > > Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> > >> > > Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> > >> > > ipmi_si: Adding default-specified smic state machine > >> > > ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 > >> > > ipmi_si: Could not set up I/O space > >> > > Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> > >> > > Trying to free nonexistent resource <0000000000000caa-0000000000000caa> > >> > > Trying to free nonexistent resource <0000000000000cab-0000000000000cab> > >> > > ipmi_si: Adding default-specified bt state machine > >> > > ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 > >> > > ipmi_si: Could not set up I/O space > >> > > Trying to free nonexistent resource <00000000000000e4-00000000000000e4> > >> > > Trying to free nonexistent resource <00000000000000e5-00000000000000e5> > >> > > Trying to free nonexistent resource <00000000000000e6-00000000000000e6> > >> > > ipmi_si: Unable to find any System Interface(s) > >> > > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > >> > ... > >> > > >> > It appears to be unrelated to the failure this original message was > >> > about. However, the failure brought the above to our attention. > >> > > >> > Is the IPMI driver used on ARM? Documentation/IPMI.txt indicates a > >> > dependency on ACPI, but that isn't reflected in the Kconfig. At any > >> > rate, it seems rather unhappy. :( > >> > >> It certainly can be used, and it can be probed through a known PC-style > >> port number or through the DT binding. > >> > >> However, we don't normally want it to try the PC style addresses, which > >> appear to be used in this case. This should only happen if > >> CONFIG_IPMI_SI_PROBE_DEFAULTS is set, as far as I can tell. Is that > >> set in your configuration? > > > > It's not set in multi_v7_defconfig, which is the config this failed > > under. At least not on linux-3.10.y. Oops, I was wrong. Not sure what happened to my grep-fu, but it is clearly set in multi_v7_defconfig in linux-3.10.y. > > Kevin, do you still have the full config from this build? Could you > > send us the IPMI related settings? > > Below is the .config used for the multi_v7_defconfig build of v3.10.39 Awesome, thanks. That confirms I was wrong :) On a broader topic, if we have users in the field running v3.10.y on ARM systems, then I think it's worth backporting the defconfig changes to boot-test those systems. I'll see if I can generate a list of patches. thx, Jason. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] 2014-05-07 20:28 ` Jason Cooper @ 2014-05-07 20:31 ` Kevin Hilman 0 siblings, 0 replies; 8+ messages in thread From: Kevin Hilman @ 2014-05-07 20:31 UTC (permalink / raw) To: Jason Cooper Cc: Arnd Bergmann, linaro-kernel@lists.linaro.org, Corey Minyard, Thomas Petazzoni, Gregory CLEMENT, Ezequiel Garcia, Andrew Lunn, kernel-build-reports, Sebastian Hesselbarth, LKML, openipmi-developer On Wed, May 7, 2014 at 1:28 PM, Jason Cooper <jason@lakedaemon.net> wrote: [...] > On a broader topic, if we have users in the field running v3.10.y on ARM > systems, then I think it's worth backporting the defconfig changes to > boot-test those systems. Yeah, especially since v3.10 is LTS, it's probably worth doing, though not sure if anyone using LTS cares about multi_v7_defconfig. > I'll see if I can generate a list of patches. Thanks. Kevin ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-05-07 20:31 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <5369063f.4291420a.03aa.495e@mx.google.com>
2014-05-07 14:20 ` IPMI misbehaving on ARM defconfigs, was [Re: stable boot: 18 pass, 4 fail (v3.10.39)] Jason Cooper
2014-05-07 14:31 ` Corey Minyard
2014-05-07 15:12 ` Jason Cooper
2014-05-07 14:44 ` Arnd Bergmann
2014-05-07 14:56 ` Jason Cooper
2014-05-07 19:36 ` Kevin Hilman
2014-05-07 20:28 ` Jason Cooper
2014-05-07 20:31 ` Kevin Hilman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox