Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT

[Yu Tu <yu.tu@amlogic.com>]

Hi Neil,
	Thanks for your reply and explanation.

On 2022/11/23 21:27, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
> 
> On 23/11/2022 11:10, Krzysztof Kozlowski wrote:
>> On 23/11/2022 03:13, Yu Tu wrote:
>>> Added information about the S4 SOC Peripheral Clock controller in DT.
>>>
>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com>
>>> ---
>>>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++
>>>   1 file changed, 26 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi 
>>> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>> index bd9c2ef83314..e7fab6e400be 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>> @@ -6,6 +6,8 @@
>>>   #include <dt-bindings/interrupt-controller/irq.h>
>>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>   #include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
>>>   / {
>>>       cpus {
>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 {
>>>                   #clock-cells = <1>;
>>>               };
>>> +            clkc_periphs: clock-controller {
>>> +                compatible = "amlogic,s4-peripherals-clkc";
>>> +                reg = <0x0 0x0 0x0 0x49c>;
>>
>> This is broken... did you check for warnings?
> 
> This is actually fine, the parent node has a ranges property:
> https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 
> 
> 
> Neil
> 
>>
>>
>> Best regards,
>> Krzysztof
>>
>>
>> _______________________________________________
>> linux-amlogic mailing list
>> linux-amlogic@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
> 
> .