Re: [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs

[Astrid Rost <astridr@axis.com>]

Hello,

Thank you! Yes this makes things much easier. I will fix it.

Astrid

On 1/19/23 12:18, Krzysztof Kozlowski wrote:
> On 18/01/2023 13:52, Astrid Rost wrote:
>> Add simple-card,aux-jack-types:
>> Array of snd_jack_type to create jack-input-event for jack devices in
>> aux-devs. If the setting is 0, the supported type of the device is used.
>> A device which has the functions set_jack and get_jack_supported_type
>> counts as jack device.
> 
> How a device can have "set_jack"? Isn't this part of code? Are you sure
> you describe here hardware, not Linux driver behavior?
> 
>>
>> Signed-off-by: Astrid Rost <astrid.rost@axis.com>
>> ---
>>   .../bindings/sound/simple-card.yaml           | 35 +++++++++++++++++++
>>   1 file changed, 35 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
>> index ed19899bc94b..2635b1c04fc9 100644
>> --- a/Documentation/devicetree/bindings/sound/simple-card.yaml
>> +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
>> @@ -199,6 +199,13 @@ properties:
>>       maxItems: 1
>>     simple-audio-card,mic-det-gpio:
>>       maxItems: 1
>> +  simple-audio-card,aux-jack-types:
>> +    $ref: "/schemas/types.yaml#/definitions/uint32-array"
> 
> Drop quotes.
> 
>> +    description: |
>> +      Array of snd_jack_type to create jack-input-event for jack
>> +      devices in aux-devs. If the setting is 0, the supported
>> +      type of the device is used. A device which has the functions
>> +      set_jack and get_jack_supported_type counts as jack device.
> 
> Same problems.
> 
> Additionally, if this is a type of aux-dev, then maybe it should be just
> added as argument to aux-dev?
> 
>>   
>>   patternProperties:
>>     "^simple-audio-card,cpu(@[0-9a-f]+)?$":
>> @@ -498,3 +505,31 @@ examples:
>>               };
>>           };
>>       };
>> +#--------------------
>> +# Add a headphone and a headset mic jack,
>> +# which use an auxiliary jack detector e.g. via i2c.
>> +# The events, which should be enabled are:
>> +# SND_JACK_HEADPHONE = 1
>> +# SND_JACK_MICROPHONE = 2
>> +#--------------------
> 
> No new examples, integrate it into some existing one.
> 
>> +    sound {
>> +        compatible = "simple-audio-card";
>> +        simple-audio-card,widgets =
>> +            "Headphone", "Headphone Jack",
>> +            "Headset Mic", "Headset Mic Jack";
>> +        simple-audio-card,routing =
>> +            "Headphone Jack", "HPLEFT",
>> +            "Headphone Jack", "HPRIGHT",
>> +            "LEFTIN", "Headset Mic",
>> +            "RIGHTIN", "Headset Mic";
>> +        simple-audio-card,aux-devs = <&hp_jack>, <&hs_mic_jack>;
>> +        simple-audio-card,aux-jack-types = <1 2>;
>> +        simple-audio-card,cpu {
>> +            sound-dai = <&ssi2>;
>> +        };
>> +        simple-audio-card,codec {
>> +            sound-dai = <&codec>;
>> +            clocks = <&clocks>;
>> +        };
>> +    };
> 
> Best regards,
> Krzysztof
>