From: Pekka Enberg <penberg@gmail.com>
To: knobi@knobisoft.de
Cc: linux-kernel@vger.kernel.org, axboe@suse.de,
Pekka Enberg <penberg@cs.helsinki.fi>
Subject: Re: Head parking (was: IBM HDAPS things are looking up)
Date: Thu, 7 Jul 2005 16:38:07 +0300 [thread overview]
Message-ID: <84144f020507070638393f68d6@mail.gmail.com> (raw)
In-Reply-To: <20050707131331.12406.qmail@web32602.mail.mud.yahoo.com>
On 7/7/05, Martin Knoblauch <knobi@knobisoft.de> wrote:
> Interesting. Same Notebook, same drive. The program say "not parked"
> :-( This is on FC2 with a pretty much vanilla 2.6.9 kernel.
>
> [root@l15833 tmp]# uname -a
> Linux l15833 2.6.9-noagp #1 Wed May 4 16:09:14 CEST 2005 i686 i686 i386
> GNU/Linux
> [root@l15833 tmp]# hdparm -i /dev/hda
>
> /dev/hda:
>
> Model=HTS726060M9AT00, FwRev=MH4OA6BA, SerialNo=MRH403M4GS88XB
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
> BuffType=DualPortCache, BuffSize=7877kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117210240
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
> AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
> Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:
>
> * signifies the current active mode
>
> [root@l15833 tmp]# ./park /dev/hda
> head not parked 4c
> [root@l15833 tmp]#
Martin, don't trim the cc!
haji ~ # uname -a
Linux haji 2.6.12 #12 Mon Jun 20 09:39:37 EEST 2005 i686 Intel(R)
Pentium(R) M processor 2.00GHz GenuineIntel GNU/Linux
haji ~ # hdparm -i /dev/hda
/dev/hda:
Model=HTS726060M9AT00, FwRev=MH4OA6DA, SerialNo=MRH453M4H2A6PB
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7877kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117210240
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:
* signifies the current active mode
next prev parent reply other threads:[~2005-07-07 13:42 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-07 13:13 Head parking (was: IBM HDAPS things are looking up) Martin Knoblauch
2005-07-07 13:38 ` Pekka Enberg [this message]
2005-07-07 13:47 ` Martin Knoblauch
2005-07-07 14:45 ` Dan Christensen
2005-07-07 16:39 ` Martin Knoblauch
2005-07-07 16:54 ` Alejandro Bonilla
2005-07-07 17:14 ` Martin Knoblauch
2005-07-07 17:34 ` [Hdaps-devel] " Dave Hansen
2005-07-07 18:45 ` Martin Knoblauch
2005-07-07 18:51 ` Erik Mouw
2005-07-07 18:58 ` Martin Knoblauch
2005-07-07 18:59 ` Shawn Starr
2005-07-07 19:00 ` Martin Knoblauch
2005-07-07 19:10 ` Updating hard disk firmware (Was: Re: Head parking) Frank Sorenson
2005-07-13 8:58 ` Updating hard disk firmware & parking hard disk Gijs Hillenius
2005-07-13 10:10 ` Jan Engelhardt
2005-07-13 10:21 ` [Hdaps-devel] " Lenz Grimmer
2005-07-13 11:02 ` Jan Engelhardt
2005-07-13 13:11 ` Paul Slootman
2005-07-13 19:11 ` Bill Davidsen
2005-07-13 19:10 ` Paul Slootman
2005-07-13 19:18 ` Lee Revell
2005-07-13 23:32 ` [Hdaps-devel] " Shawn Starr
-- strict thread matches above, loose matches on Subject: below --
2005-07-04 6:00 IBM HDAPS things are looking up (was: Re: [Hdaps-devel] Re: [ltp] IBM HDAPS Someone interested? (Accelerometer)) Lenz Grimmer
2005-07-04 6:17 ` Jens Axboe
2005-07-04 5:30 ` Alejandro Bonilla
2005-07-04 6:37 ` Jens Axboe
2005-07-04 7:16 ` Arjan van de Ven
2005-07-04 7:22 ` Jens Axboe
2005-07-04 7:27 ` Arjan van de Ven
2005-07-04 7:30 ` Jens Axboe
2005-07-04 10:33 ` Lenz Grimmer
2005-07-04 11:06 ` Jens Axboe
2005-07-07 8:03 ` Jens Axboe
2005-07-07 8:41 ` Head parking (was: IBM HDAPS things are looking up) Lenz Grimmer
2005-07-07 8:48 ` Jens Axboe
2005-07-07 9:07 ` Pekka Enberg
2005-07-07 11:44 ` Jens Axboe
2005-07-07 13:28 ` Pekka Enberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=84144f020507070638393f68d6@mail.gmail.com \
--to=penberg@gmail.com \
--cc=axboe@suse.de \
--cc=knobi@knobisoft.de \
--cc=linux-kernel@vger.kernel.org \
--cc=penberg@cs.helsinki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox