Re: [PATCH v2 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC

[Samuel Holland <samuel.holland@sifive.com>]

Hi Troy,

On 2024-10-28 12:32 AM, Troy Mitchell wrote:
> The I2C of K1 supports fast-speed-mode and high-speed-mode,
> and supports FIFO transmission.
> 
> Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
> ---
>  .../bindings/i2c/spacemit,k1-i2c.yaml         | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> new file mode 100644
> index 000000000000..57af66f494e7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: I2C controller embedded in SpacemiT's K1 SoC
> +
> +maintainers:
> +  - Troy Mitchell <troymitchell988@gmail.com>
> +
> +properties:
> +  compatible:
> +    const: spacemit,k1-i2c
> +
> +  reg:
> +    maxItems: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1

Looking at the K1 user manual (9.1.4.77 RCPU I2C0 CLOCK RESET CONTROL
REGISTER(RCPU_I2C0_CLK_RST)), I see two clocks (pclk, fclk) and a reset, which
looks to be standard across the peripherals in this SoC. Please be sure that the
binding covers all resources needed to use this peripheral.

> +
> +  clock-frequency:
> +    description:
> +      Desired I2C bus clock frequency in Hz. As only fast and high-speed
> +      modes are supported by hardware, possible values are 100000 and 400000.
> +    enum: [100000, 400000]

This looks wrong. In the manual I see:

* Supports standard-mode operation up to 100 Kbps
* Supports fast-mode operation up to 400Kbps
* Supports high-speed mode (HS mode) slave operation up to 3.4Mbps(High-speed
I2C only)
* Supports high-speed mode (HS mode) master operation up to 3.3 Mbps (High-speed
I2C only)

So even ignoring HS mode, 100 kHz and 400 kHz are only the maximums, not fixed
frequencies.

Regards,
Samuel

> +    default: 100000
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i2c@d4010800 {
> +        compatible = "spacemit,k1-i2c";
> +        reg = <0x0 0xd4010800 0x0 0x38>;
> +        interrupt-parent = <&plic>;
> +        interrupts = <36>;
> +        clocks = <&ccu 90>;
> +        clock-frequency = <100000>;
> +    };
> +
> +...