* New display errors in 2.6.38-rc2-00175-g6fb1b30
@ 2011-01-28 20:29 Nico Schottelius
2011-01-30 10:32 ` More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30) Nico Schottelius
2011-02-02 20:28 ` New display errors in 2.6.38-rc2-00175-g6fb1b30 Maciej Rutecki
0 siblings, 2 replies; 6+ messages in thread
From: Nico Schottelius @ 2011-01-28 20:29 UTC (permalink / raw)
To: LKML; +Cc: Nico Schottelius
[-- Attachment #1: Type: text/plain, Size: 497 bytes --]
Hey hackers!
With 2.6.38-rc2-00175-g6fb1b30 I get a new version of broken
display I've never seen before: The display looks like a misconfigured
tv after 2-3 suspends. Switching to a different tty was possible (though
still same broken display, but allowed a reboot) one time, the other time
the system completly froze.
2.6.37, 2.6.37-05761-gf878133 and 2.6.37-07956-g8c34482 do not have this bug.
Cheers,
Nico
--
PGP key: 7ED9 F7D3 6B10 81D7 0EC5 5C09 D7DC C8E4 3187 7DF0
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30)
2011-01-28 20:29 New display errors in 2.6.38-rc2-00175-g6fb1b30 Nico Schottelius
@ 2011-01-30 10:32 ` Nico Schottelius
2011-01-30 11:32 ` Chris Wilson
2011-02-02 20:28 ` New display errors in 2.6.38-rc2-00175-g6fb1b30 Maciej Rutecki
1 sibling, 1 reply; 6+ messages in thread
From: Nico Schottelius @ 2011-01-30 10:32 UTC (permalink / raw)
To: Nico Schottelius, LKML
[-- Attachment #1: Type: text/plain, Size: 712 bytes --]
Nico Schottelius [Fri, Jan 28, 2011 at 09:29:05PM +0100]:
> With 2.6.38-rc2-00175-g6fb1b30 I get a new version of broken
> display I've never seen before: The display looks like a misconfigured
> tv after 2-3 suspends. Switching to a different tty was possible (though
> still same broken display, but allowed a reboot) one time, the other time
> the system completly froze.
This time I can produce some logs, as only my primary notebook display
is completly broken, the external monitor is working fine.
Attached are xorg, dmesg + kernel config.
I've to emphasize that this used to work better in 2.6.37.
Cheers,
Nico
--
PGP key: 7ED9 F7D3 6B10 81D7 0EC5 5C09 D7DC C8E4 3187 7DF0
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30)
2011-01-30 10:32 ` More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30) Nico Schottelius
@ 2011-01-30 11:32 ` Chris Wilson
2011-01-30 12:08 ` Nico Schottelius
0 siblings, 1 reply; 6+ messages in thread
From: Chris Wilson @ 2011-01-30 11:32 UTC (permalink / raw)
To: Nico Schottelius, Nico Schottelius, LKML
On Sun, 30 Jan 2011 11:32:41 +0100, Nico Schottelius <nico-kernel-20110117@schottelius.org> wrote:
> This time I can produce some logs, as only my primary notebook display
> is completly broken, the external monitor is working fine.
>
> Attached are xorg, dmesg + kernel config.
Oh no, they weren't.
Sorry, too soon after pantomime season.
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30)
2011-01-30 11:32 ` Chris Wilson
@ 2011-01-30 12:08 ` Nico Schottelius
2011-01-30 12:25 ` Chris Wilson
0 siblings, 1 reply; 6+ messages in thread
From: Nico Schottelius @ 2011-01-30 12:08 UTC (permalink / raw)
To: Chris Wilson; +Cc: Nico Schottelius, LKML
[-- Attachment #1: Type: text/plain, Size: 599 bytes --]
Chris Wilson [Sun, Jan 30, 2011 at 11:32:55AM +0000]:
> On Sun, 30 Jan 2011 11:32:41 +0100, Nico Schottelius <nico-kernel-20110117@schottelius.org> wrote:
> > This time I can produce some logs, as only my primary notebook display
> > is completly broken, the external monitor is working fine.
> >
> > Attached are xorg, dmesg + kernel config.
>
> Oh no, they weren't.
Alright, it's too early in the morning. Attached now.
Additional information:
Using xrandr to switch LVDS1 off and on again "fixes"
the issue.
Cheers,
Nico
--
PGP key: 7ED9 F7D3 6B10 81D7 0EC5 5C09 D7DC C8E4 3187 7DF0
[-- Attachment #2: 2.6.38-rc2-00274-g1f0324c.config.gz --]
[-- Type: application/octet-stream, Size: 30436 bytes --]
[-- Attachment #3: 2.6.38-rc2-00274-g1f0324c.dmesg --]
[-- Type: text/plain, Size: 68807 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-rc2-00274-g1f0324c (nico@kr) (gcc version 4.5.2 (GCC) ) #59 SMP PREEMPT Fri Jan 28 22:18:04 CET 2011
[ 0.000000] Command line:
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bb27c000 - 00000000bb282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb282000 - 00000000bb363000 (usable)
[ 0.000000] BIOS-e820: 00000000bb363000 - 00000000bb375000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb375000 - 00000000bb3f6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb3f6000 - 00000000bb40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb40f000 - 00000000bb470000 (usable)
[ 0.000000] BIOS-e820: 00000000bb470000 - 00000000bb668000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb668000 - 00000000bb6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb6e8000 - 00000000bb70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb70f000 - 00000000bb717000 (usable)
[ 0.000000] BIOS-e820: 00000000bb717000 - 00000000bb71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb71f000 - 00000000bb76b000 (usable)
[ 0.000000] BIOS-e820: 00000000bb76b000 - 00000000bb777000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb777000 - 00000000bb77a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb77a000 - 00000000bb781000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb781000 - 00000000bb782000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb782000 - 00000000bb78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb78b000 - 00000000bb78c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb78c000 - 00000000bb79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb79f000 - 00000000bb7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: 3626A14/3626A14, BIOS 6QET35WW (1.05 ) 01/26/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb800000
[ 0.000000] 0000000000 - 00bb800000 page 2M
[ 0.000000] kernel direct mapping tables up to bb800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ bb765000-bb76b000
[ 0.000000] ACPI: RSDP 00000000000f68f0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bb7f0a79 00094 (v01 LENOVO TP-6Q 00001050 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bb7f0c00 000F4 (v04 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bb7f0f6b 0DD9B (v01 LENOVO TP-6Q 00001050 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bb6e7000 00040
[ 0.000000] ACPI: SSDT 00000000bb7f0db4 001B7 (v01 LENOVO TP-6Q 00001050 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bb7fed06 00052 (v01 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bb7fed58 00084 (v01 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bb7fee14 0003C (v01 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bb7fee50 00038 (v01 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bb7fef34 000A4 (v16 LENOVO TP-6Q 00001050 PTL 00000001)
[ 0.000000] ACPI: BOOT 00000000bb7fefd8 00028 (v01 LENOVO TP-6Q 00001050 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bb6e590a 0085B (v01 LENOVO TP-6Q 00001050 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bb78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 00000000bb781000 000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bb779000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bb778000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bb777000 0049F (v01 PmRef ApTst 00003000 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134000000-ffff8801377fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bb27c
[ 0.000000] 0: 0x000bb282 -> 0x000bb363
[ 0.000000] 0: 0x000bb40f -> 0x000bb470
[ 0.000000] 0: 0x000bb70f -> 0x000bb717
[ 0.000000] 0: 0x000bb71f -> 0x000bb76b
[ 0.000000] 0: 0x000bb7ff -> 0x000bb800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 996257
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 748619 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bb27c000 - 00000000bb282000
[ 0.000000] PM: Registered nosave memory: 00000000bb363000 - 00000000bb375000
[ 0.000000] PM: Registered nosave memory: 00000000bb375000 - 00000000bb3f6000
[ 0.000000] PM: Registered nosave memory: 00000000bb3f6000 - 00000000bb40f000
[ 0.000000] PM: Registered nosave memory: 00000000bb470000 - 00000000bb668000
[ 0.000000] PM: Registered nosave memory: 00000000bb668000 - 00000000bb6e8000
[ 0.000000] PM: Registered nosave memory: 00000000bb6e8000 - 00000000bb70f000
[ 0.000000] PM: Registered nosave memory: 00000000bb717000 - 00000000bb71f000
[ 0.000000] PM: Registered nosave memory: 00000000bb76b000 - 00000000bb777000
[ 0.000000] PM: Registered nosave memory: 00000000bb777000 - 00000000bb77a000
[ 0.000000] PM: Registered nosave memory: 00000000bb77a000 - 00000000bb781000
[ 0.000000] PM: Registered nosave memory: 00000000bb781000 - 00000000bb782000
[ 0.000000] PM: Registered nosave memory: 00000000bb782000 - 00000000bb78b000
[ 0.000000] PM: Registered nosave memory: 00000000bb78b000 - 00000000bb78c000
[ 0.000000] PM: Registered nosave memory: 00000000bb78c000 - 00000000bb79f000
[ 0.000000] PM: Registered nosave memory: 00000000bb79f000 - 00000000bb7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
[ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bb000000 s74816 r8192 d23488 u524288
[ 0.000000] pcpu-alloc: s74816 r8192 d23488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 978779
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3853132k/5111808k available (3932k kernel code, 1126780k absent, 131896k reserved, 2677k data, 532k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:384
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 40632320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2393.651 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.30 BogoMIPS (lpj=2393651)
[ 0.000246] pid_max: default: 32768 minimum: 301
[ 0.000394] Security Framework initialized
[ 0.000817] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002004] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002549] Mount-cache hash table entries: 256
[ 0.002806] Initializing cgroup subsys debug
[ 0.002927] Initializing cgroup subsys ns
[ 0.003048] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003246] Initializing cgroup subsys cpuacct
[ 0.003372] Initializing cgroup subsys memory
[ 0.005451] Initializing cgroup subsys devices
[ 0.005570] Initializing cgroup subsys freezer
[ 0.005714] CPU: Physical Processor ID: 0
[ 0.005832] CPU: Processor Core ID: 0
[ 0.005951] mce: CPU supports 9 MCE banks
[ 0.006076] CPU0: Thermal monitoring enabled (TM1)
[ 0.006201] using mwait in idle threads.
[ 0.006379] ACPI: Core revision 20110112
[ 0.082849] Setting APIC routing to flat
[ 0.083380] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093508] CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02
[ 0.195087] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.195437] ... version: 3
[ 0.195571] ... bit width: 48
[ 0.195705] ... generic registers: 4
[ 0.195839] ... value mask: 0000ffffffffffff
[ 0.195976] ... max period: 000000007fffffff
[ 0.196116] ... fixed-purpose events: 3
[ 0.196251] ... event mask: 000000070000000f
[ 0.202095] Booting Node 0, Processors #1 #2 #3 Ok.
[ 0.478647] Brought up 4 CPUs
[ 0.478782] Total of 4 processors activated (19150.51 BogoMIPS).
[ 0.480513] print_constraints: dummy:
[ 0.480697] NET: Registered protocol family 16
[ 0.481134] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.481360] ACPI: bus type pci registered
[ 0.481609] PCI: Using configuration type 1 for base access
[ 0.484351] bio: create slab <bio-0> at 0
[ 0.487221] ACPI: EC: EC description table is found, configuring boot EC
[ 0.494012] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.574613] ACPI: SSDT 00000000bb71aa18 0046F (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
[ 0.575562] ACPI: Dynamic OEM Table Load:
[ 0.575779] ACPI: SSDT (null) 0046F (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
[ 0.576255] ACPI: SSDT 00000000bb718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
[ 0.577224] ACPI: Dynamic OEM Table Load:
[ 0.577442] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
[ 0.583775] ACPI: SSDT 00000000bb719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
[ 0.584807] ACPI: Dynamic OEM Table Load:
[ 0.585025] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
[ 0.588587] ACPI: SSDT 00000000bb717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
[ 0.589559] ACPI: Dynamic OEM Table Load:
[ 0.589776] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
[ 0.595192] ACPI: Interpreter enabled
[ 0.595328] ACPI: (supports S0 S3 S4 S5)
[ 0.595649] ACPI: Using IOAPIC for interrupt routing
[ 0.600919] ACPI: Power Resource [PUBS] (on)
[ 0.606069] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.614908] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.615050] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.615293] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.615500] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.615521] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.615540] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.615556] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.615573] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.615589] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.616043] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.616252] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.616401] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.616544] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.616770] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.616994] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.617220] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.617455] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.617485] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.617496] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.617502] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.617507] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.617570] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.617598] pci 0000:00:16.0: reg 10: [mem 0xf2727800-0xf272780f 64bit]
[ 0.617673] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.617679] pci 0000:00:16.0: PME# disabled
[ 0.617717] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.617742] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
[ 0.617752] pci 0000:00:19.0: reg 14: [mem 0xf2525000-0xf2525fff]
[ 0.617763] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
[ 0.617834] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.617839] pci 0000:00:19.0: PME# disabled
[ 0.617869] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.617894] pci 0000:00:1a.0: reg 10: [mem 0xf2728000-0xf27283ff]
[ 0.617984] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.617989] pci 0000:00:1a.0: PME# disabled
[ 0.618019] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.618038] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit]
[ 0.618116] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.618120] pci 0000:00:1b.0: PME# disabled
[ 0.618145] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.618220] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.618225] pci 0000:00:1c.0: PME# disabled
[ 0.618254] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.618336] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.618341] pci 0000:00:1c.3: PME# disabled
[ 0.618367] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.618446] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.618451] pci 0000:00:1c.4: PME# disabled
[ 0.618487] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.618513] pci 0000:00:1d.0: reg 10: [mem 0xf2728400-0xf27287ff]
[ 0.618603] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.618608] pci 0000:00:1d.0: PME# disabled
[ 0.618635] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.618712] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.618830] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.618857] pci 0000:00:1f.2: reg 10: [io 0x1860-0x1867]
[ 0.618869] pci 0000:00:1f.2: reg 14: [io 0x1814-0x1817]
[ 0.618880] pci 0000:00:1f.2: reg 18: [io 0x1818-0x181f]
[ 0.618891] pci 0000:00:1f.2: reg 1c: [io 0x1810-0x1813]
[ 0.618902] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
[ 0.618913] pci 0000:00:1f.2: reg 24: [mem 0xf2727000-0xf27277ff]
[ 0.618960] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.618965] pci 0000:00:1f.2: PME# disabled
[ 0.618987] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.619008] pci 0000:00:1f.3: reg 10: [mem 0xf2728800-0xf27288ff 64bit]
[ 0.619038] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f]
[ 0.619085] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.619112] pci 0000:00:1f.6: reg 10: [mem 0xf2526000-0xf2526fff 64bit]
[ 0.619248] pci 0000:00:1c.0: PCI bridge to [bus 0d-0d]
[ 0.619393] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.619398] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.619406] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.619462] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.619604] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.619609] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.619616] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.619749] pci 0000:02:00.0: [8086:4238] type 0 class 0x000280
[ 0.619805] pci 0000:02:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit]
[ 0.620000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.620026] pci 0000:02:00.0: PME# disabled
[ 0.620069] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.620210] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.620215] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.620222] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.620295] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 0.620446] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.620451] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.620459] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.620461] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.620464] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.620466] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.620468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.620470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.620473] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.620499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.620624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.620660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.620694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.624951] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.625580] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.626188] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.626977] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.627599] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.628203] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.628978] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.629765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.630459] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.630693] vgaarb: loaded
[ 0.630938] SCSI subsystem initialized
[ 0.631155] libata version 3.00 loaded.
[ 0.631245] PCI: Using ACPI for IRQ routing
[ 0.631386] PCI: pci_cache_line_size set to 64 bytes
[ 0.631516] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.631518] reserve RAM buffer: 00000000bb27c000 - 00000000bbffffff
[ 0.631524] reserve RAM buffer: 00000000bb363000 - 00000000bbffffff
[ 0.631529] reserve RAM buffer: 00000000bb470000 - 00000000bbffffff
[ 0.631533] reserve RAM buffer: 00000000bb717000 - 00000000bbffffff
[ 0.631536] reserve RAM buffer: 00000000bb76b000 - 00000000bbffffff
[ 0.631540] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff
[ 0.631693] NetLabel: Initializing
[ 0.631826] NetLabel: domain hash size = 128
[ 0.631961] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.632106] NetLabel: unlabeled traffic allowed by default
[ 0.632258] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.632774] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.634924] Switching to clocksource hpet
[ 0.635129] pnp: PnP ACPI init
[ 0.635268] ACPI: bus type pnp registered
[ 0.635364] Switched to NOHz mode on CPU #3
[ 0.635377] Switched to NOHz mode on CPU #1
[ 0.635386] Switched to NOHz mode on CPU #2
[ 0.635813] Switched to NOHz mode on CPU #0
[ 0.636669] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.636672] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.636673] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.636675] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.636677] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.636678] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.636680] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.636682] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.636684] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.636685] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.636687] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.636689] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.636690] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.636692] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.636694] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.636696] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.636697] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.636782] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.636927] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
[ 0.637071] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
[ 0.637227] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.637370] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.637514] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.637658] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.637802] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.637947] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.638090] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.638246] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.638390] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.638535] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.638679] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.638823] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.638968] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.638984] pnp 00:01: [bus ff]
[ 0.639060] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.639079] pnp 00:02: [bus 00-fe]
[ 0.639085] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.639087] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.639089] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.639090] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.639092] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.639094] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.639096] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.639098] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.639099] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.639101] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.639124] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.639125] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.639127] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.639129] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.639131] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.639133] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.639134] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[ 0.639136] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[ 0.639213] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.639501] pnp 00:03: [io 0x0010-0x001f]
[ 0.639503] pnp 00:03: [io 0x0090-0x009f]
[ 0.639504] pnp 00:03: [io 0x0024-0x0025]
[ 0.639506] pnp 00:03: [io 0x0028-0x0029]
[ 0.639507] pnp 00:03: [io 0x002c-0x002d]
[ 0.639509] pnp 00:03: [io 0x0030-0x0031]
[ 0.639510] pnp 00:03: [io 0x0034-0x0035]
[ 0.639512] pnp 00:03: [io 0x0038-0x0039]
[ 0.639513] pnp 00:03: [io 0x003c-0x003d]
[ 0.639515] pnp 00:03: [io 0x00a4-0x00a5]
[ 0.639517] pnp 00:03: [io 0x00a8-0x00a9]
[ 0.639518] pnp 00:03: [io 0x00ac-0x00ad]
[ 0.639520] pnp 00:03: [io 0x00b0-0x00b5]
[ 0.639521] pnp 00:03: [io 0x00b8-0x00b9]
[ 0.639523] pnp 00:03: [io 0x00bc-0x00bd]
[ 0.639524] pnp 00:03: [io 0x0050-0x0053]
[ 0.639526] pnp 00:03: [io 0x0072-0x0077]
[ 0.639527] pnp 00:03: [io 0x164e-0x164f]
[ 0.639529] pnp 00:03: [io 0x002e-0x002f]
[ 0.639530] pnp 00:03: [io 0x1000-0x107f]
[ 0.639532] pnp 00:03: [io 0x1180-0x11ff]
[ 0.639534] pnp 00:03: [io 0x0800-0x080f]
[ 0.639535] pnp 00:03: [io 0x15e0-0x15ef]
[ 0.639537] pnp 00:03: [io 0x1600-0x1641]
[ 0.639540] pnp 00:03: [io 0x1644-0x167f]
[ 0.639541] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.639543] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.639545] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[ 0.639547] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[ 0.639548] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[ 0.639550] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[ 0.639640] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.639783] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.639924] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.640066] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.640221] system 00:03: [io 0x15e0-0x15ef] has been reserved
[ 0.640362] system 00:03: [io 0x1600-0x1641] has been reserved
[ 0.640503] system 00:03: [io 0x1644-0x167f] could not be reserved
[ 0.640646] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.640788] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.640932] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.641074] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.641221] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.641364] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.641508] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.641543] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.641605] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.641616] pnp 00:05: [io 0x0000-0x000f]
[ 0.641618] pnp 00:05: [io 0x0080-0x008f]
[ 0.641620] pnp 00:05: [io 0x00c0-0x00df]
[ 0.641622] pnp 00:05: [dma 4]
[ 0.641677] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.641687] pnp 00:06: [io 0x0061]
[ 0.641745] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.641756] pnp 00:07: [io 0x00f0]
[ 0.641764] pnp 00:07: [irq 13]
[ 0.641820] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.641833] pnp 00:08: [io 0x0070-0x0071]
[ 0.641838] pnp 00:08: [irq 8]
[ 0.641897] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.641907] pnp 00:09: [io 0x0060]
[ 0.641909] pnp 00:09: [io 0x0064]
[ 0.641914] pnp 00:09: [irq 1]
[ 0.641972] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.641989] pnp 00:0a: [irq 12]
[ 0.642047] pnp 00:0a: Plug and Play ACPI device, IDs LEN0018 PNP0f13 (active)
[ 0.642340] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.642408] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.642941] pnp 00:0c: [mem 0xfeaff000-0xfeafffff]
[ 0.643034] system 00:0c: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.643198] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.643289] pnp: PnP ACPI: found 13 devices
[ 0.643424] ACPI: ACPI bus type pnp unregistered
[ 0.651576] pci 0000:00:1c.0: PCI bridge to [bus 0d-0d]
[ 0.651716] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.651859] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.652001] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.652161] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.652301] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.652448] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.652593] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.652825] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.652963] pci 0000:00:1c.4: bridge window [io disabled]
[ 0.653115] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.653261] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.653407] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 0.653545] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.653689] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.653830] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.653988] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.654146] pci 0000:00:1c.0: setting latency timer to 64
[ 0.654156] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.654302] pci 0000:00:1c.3: setting latency timer to 64
[ 0.654309] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.654456] pci 0000:00:1c.4: setting latency timer to 64
[ 0.654464] pci 0000:00:1e.0: setting latency timer to 64
[ 0.654468] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.654471] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.654472] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.654474] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.654476] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.654478] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.654480] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.654482] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.654484] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.654486] pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.654488] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.654490] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.654492] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.654494] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.654496] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.654498] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.654532] NET: Registered protocol family 2
[ 0.654801] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.655889] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.658531] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.658960] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.659109] TCP reno registered
[ 0.659247] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.659419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.659708] NET: Registered protocol family 1
[ 0.659868] pci 0000:00:02.0: Boot video device
[ 0.659996] PCI: CLS 64 bytes, default 64
[ 0.660049] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.660203] Placing 64MB software IO TLB between ffff8800b6e7a000 - ffff8800bae7a000
[ 0.660429] software IO TLB at phys 0xb6e7a000 - 0xbae7a000
[ 0.660687] Simple Boot Flag at 0x35 set to 0x80
[ 0.662011] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 0.662164] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 0.662314] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 0.662460] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 0.662647] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.663614] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.668466] VFS: Disk quotas dquot_6.5.2
[ 0.671195] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.671639] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.673990] Btrfs loaded
[ 0.674147] msgmni has been set to 7525
[ 0.674603] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.674830] io scheduler noop registered
[ 0.674964] io scheduler deadline registered (default)
[ 0.675476] intel_idle: MWAIT substates: 0x1120
[ 0.675478] intel_idle: v0.4 model 0x25
[ 0.675479] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.675902] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.676409] ACPI: AC Adapter [AC] (on-line)
[ 0.676848] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.692041] ACPI: Lid Switch [LID]
[ 0.692262] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.708005] ACPI: Sleep Button [SLPB]
[ 0.708224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.708451] ACPI: Power Button [PWRF]
[ 0.708672] ACPI: acpi_idle yielding to intel_idle
[ 0.715566] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.715707] ACPI: Thermal Zone [THM0] (58 C)
[ 0.732099] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.732359] ACPI: Battery Slot [BAT0] (battery present)
[ 0.750765] Linux agpgart interface v0.103
[ 0.750994] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.751276] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.752519] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.752892] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.753159] [drm] Initialized drm 1.1.0 20060810
[ 0.753341] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.753482] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.753633] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.753778] i915 0000:00:02.0: setting latency timer to 64
[ 0.822651] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.822657] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.822829] [drm] Driver supports precise vblank timestamp query.
[ 0.953294] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.138062] fb0: inteldrmfb frame buffer device
[ 1.138201] drm: registered panic notifier
[ 1.138373] No ACPI video bus found
[ 1.138646] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.140665] brd: module loaded
[ 1.140796] Uniform Multi-Platform E-IDE driver
[ 1.141015] ide-gd driver 1.18
[ 1.141384] ahci 0000:00:1f.2: version 3.0
[ 1.141399] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.141589] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.141624] ahci: SSS flag set, parallel bus scan disabled
[ 1.141808] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.142037] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems sxs apst
[ 1.142283] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.149194] scsi0 : ahci
[ 1.149486] scsi1 : ahci
[ 1.149732] scsi2 : ahci
[ 1.149975] scsi3 : ahci
[ 1.150214] scsi4 : ahci
[ 1.150486] scsi5 : ahci
[ 1.151246] ata1: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727100 irq 41
[ 1.151472] ata2: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727180 irq 41
[ 1.151696] ata3: DUMMY
[ 1.151824] ata4: DUMMY
[ 1.151954] ata5: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727300 irq 41
[ 1.152180] ata6: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727380 irq 41
[ 1.152782] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.156369] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.156515] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.156889] mousedev: PS/2 mouse device common for all mice
[ 1.157896] cpuidle: using governor ladder
[ 1.159104] cpuidle: using governor menu
[ 1.159572] TCP cubic registered
[ 1.159706] NET: Registered protocol family 17
[ 1.159863] Registering the dns_resolver key type
[ 1.161513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.166346] registered taskstats version 1
[ 1.611518] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.614117] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.614125] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.614360] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.618287] ata1.00: ATA-8: ST95005620AS, SD23, max UDMA/133
[ 1.618462] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.622778] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.622784] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.623014] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.627001] ata1.00: configured for UDMA/133
[ 1.627342] scsi 0:0:0:0: Direct-Access ATA ST95005620AS SD23 PQ: 0 ANSI: 5
[ 1.628077] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.628491] sd 0:0:0:0: [sda] Write Protect is off
[ 1.628635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.628683] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.629540] sda: sda1 sda2 sda3 sda4
[ 1.630560] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.661461] Refined TSC clocksource calibration: 2393.999 MHz.
[ 1.661649] Switching to clocksource tsc
[ 2.024313] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000
[ 2.024552] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.076388] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 2.504037] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.509677] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.510621] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.514475] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
[ 2.521029] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.521913] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.526272] ata2.00: configured for UDMA/133
[ 2.644007] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
[ 2.949203] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.253664] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.256624] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 3.256873] REISERFS (device sda1): using ordered data mode
[ 3.257788] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 3.258615] REISERFS (device sda1): checking transaction log (sda1)
[ 3.263142] REISERFS (device sda1): Using r5 hash to sort names
[ 3.263478] VFS: Mounted root (reiserfs filesystem) readonly on device 8:1.
[ 3.266029] Freeing unused kernel memory: 532k freed
[ 3.266276] Write protecting the kernel read-only data: 6144k
[ 3.267811] Freeing unused kernel memory: 144k freed
[ 3.272331] Freeing unused kernel memory: 604k freed
[ 8.747886] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 9.015226] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input5
[ 9.420539] rtc_cmos 00:08: RTC can wake from S4
[ 9.427271] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 9.427311] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 10.205606] udev[1352]: starting version 165
[ 10.396851] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.421143] wmi: Mapper loaded
[ 10.447218] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 10.447243] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 10.447689] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 10.460270] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 10.460273] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 10.460312] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 10.460324] e1000e 0000:00:19.0: setting latency timer to 64
[ 10.460481] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 10.512523] Non-volatile memory driver v1.3
[ 10.549586] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
[ 10.600854] cfg80211: Calling CRDA to update world regulatory domain
[ 10.604362] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.604416] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 10.615379] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:2d:f7:02:12
[ 10.615384] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 10.615456] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 10.615491] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 10.624977] usbcore: registered new interface driver usbfs
[ 10.624994] usbcore: registered new interface driver hub
[ 10.625164] usbcore: registered new device driver usb
[ 10.651993] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.652002] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.652505] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 10.679025] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 10.679028] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 10.679031] thinkpad_acpi: ThinkPad BIOS 6QET35WW (1.05 ), EC 6QHT24WW-1.05
[ 10.679033] thinkpad_acpi: Lenovo ThinkPad X201, model 3626A14
[ 10.679732] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 10.679879] thinkpad_acpi: radio switch found; radios are enabled
[ 10.680059] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 10.682441] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 10.682965] Registered led device: tpacpi::thinklight
[ 10.682994] Registered led device: tpacpi::power
[ 10.683008] Registered led device: tpacpi:orange:batt
[ 10.683022] Registered led device: tpacpi:green:batt
[ 10.683036] Registered led device: tpacpi::dock_active
[ 10.683051] Registered led device: tpacpi::bay_active
[ 10.683072] Registered led device: tpacpi::dock_batt
[ 10.683092] Registered led device: tpacpi::unknown_led
[ 10.683113] Registered led device: tpacpi::standby
[ 10.683138] Registered led device: tpacpi::dock_status1
[ 10.683158] Registered led device: tpacpi::dock_status2
[ 10.683182] Registered led device: tpacpi::unknown_led2
[ 10.683205] Registered led device: tpacpi::unknown_led3
[ 10.683221] Registered led device: tpacpi::thinkvantage
[ 10.683222] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled
[ 10.686865] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 10.688470] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 10.752190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.752230] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 10.752237] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 10.752247] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 10.752289] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 10.752294] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 10.752304] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 10.756739] ehci_hcd 0000:00:1a.0: debug port 2
[ 10.760630] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 10.760662] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2728000
[ 10.769681] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 10.769857] hub 1-0:1.0: USB hub found
[ 10.769862] hub 1-0:1.0: 3 ports detected
[ 10.769938] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 10.769943] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 10.769952] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 10.769985] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 10.769989] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 10.769994] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 10.773683] ehci_hcd 0000:00:1d.0: debug port 2
[ 10.777558] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 10.777568] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2728400
[ 10.786631] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 10.786780] hub 2-0:1.0: USB hub found
[ 10.786785] hub 2-0:1.0: 3 ports detected
[ 10.796380] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.821693] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.821773] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 10.821803] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.894207] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 10.894210] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 10.894319] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.894356] iwlagn 0000:02:00.0: setting latency timer to 64
[ 10.894485] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 10.903523] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 10.911735] iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 10.911739] iwlagn 0000:02:00.0: Device SKU: 0Xb
[ 10.911742] iwlagn 0000:02:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 10.911769] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 10.912260] iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
[ 10.940286] iwlagn 0000:02:00.0: loaded firmware version 9.193.4.1 build 19710
[ 11.008659] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.071155] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 11.185600] hub 1-1:1.0: USB hub found
[ 11.185658] hub 1-1:1.0: 6 ports detected
[ 11.209370] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 11.287774] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 11.347964] padlock_aes: VIA PadLock not detected.
[ 11.351280] padlock_sha: VIA PadLock Hash Engine not detected.
[ 11.403499] hub 2-1:1.0: USB hub found
[ 11.403674] hub 2-1:1.0: 8 ports detected
[ 11.477561] usb 1-1.3: new full speed USB device using ehci_hcd and address 3
[ 11.637452] usb 1-1.4: new full speed USB device using ehci_hcd and address 4
[ 11.767840] Bluetooth: Core ver 2.15
[ 11.768026] NET: Registered protocol family 31
[ 11.768028] Bluetooth: HCI device and connection manager initialized
[ 11.768031] Bluetooth: HCI socket layer initialized
[ 11.790453] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.790621] usbcore: registered new interface driver btusb
[ 11.800021] usb 1-1.5: new high speed USB device using ehci_hcd and address 5
[ 11.885938] hub 1-1.5:1.0: USB hub found
[ 11.886109] hub 1-1.5:1.0: 4 ports detected
[ 11.959920] usb 1-1.6: new high speed USB device using ehci_hcd and address 6
[ 12.102212] Linux video capture interface: v2.00
[ 12.115641] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
[ 12.117177] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[ 12.117267] usbcore: registered new interface driver uvcvideo
[ 12.117271] USB Video Class driver (v1.0.0)
[ 12.124438] usb 2-1.1: new high speed USB device using ehci_hcd and address 3
[ 12.495432] usbcore: registered new interface driver uas
[ 12.498629] usbcore: registered new interface driver libusual
[ 12.509225] Initializing USB Mass Storage driver...
[ 12.509544] scsi6 : usb-storage 2-1.1:1.0
[ 12.510141] usbcore: registered new interface driver usb-storage
[ 12.510148] USB Mass Storage support registered.
[ 13.510783] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 13.511243] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 14.166154] sd 6:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[ 14.166994] sd 6:0:0:0: [sdb] Write Protect is off
[ 14.167003] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 14.168345] sd 6:0:0:0: [sdb] No Caching mode page present
[ 14.168351] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.172312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 14.172319] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.173236] sdb: sdb1
[ 14.176406] sd 6:0:0:0: [sdb] No Caching mode page present
[ 14.176411] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.176416] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 17.588241] usb 1-1.5.4: new high speed USB device using ehci_hcd and address 7
[ 17.675182] usb-storage 1-1.5.4:1.0: Quirks match for vid 1058 pid 0704: 8000
[ 17.675256] scsi7 : usb-storage 1-1.5.4:1.0
[ 18.673795] scsi 7:0:0:0: Direct-Access WD 5000BMV External 1.75 PQ: 0 ANSI: 4
[ 18.674007] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 18.674509] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 18.675128] sd 7:0:0:0: [sdc] Write Protect is off
[ 18.675131] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 18.675892] sd 7:0:0:0: [sdc] No Caching mode page present
[ 18.675896] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 18.677871] sd 7:0:0:0: [sdc] No Caching mode page present
[ 18.677874] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 18.711337] sdc: unknown partition table
[ 18.713311] sd 7:0:0:0: [sdc] No Caching mode page present
[ 18.713315] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 18.713318] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 19.675401] REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
[ 19.675441] REISERFS (device dm-1): using ordered data mode
[ 19.675852] REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 19.676323] REISERFS (device dm-1): checking transaction log (dm-1)
[ 19.722716] REISERFS (device dm-1): Using r5 hash to sort names
[ 21.292152] ------------[ cut here ]------------
[ 21.292166] WARNING: at kernel/printk.c:430 do_syslog+0x427/0x452()
[ 21.292170] Hardware name: 3626A14
[ 21.292173] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated and denied).
[ 21.292177] Modules linked in: usb_storage usb_libusual uas uvcvideo videodev v4l2_compat_ioctl32 btusb bluetooth sha256_generic aesni_intel cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod arc4 ecb snd_hda_codec_hdmi snd_hda_codec_conexant iwlagn iwlcore snd_hda_intel snd_pcm_oss snd_hda_codec ehci_hcd mac80211 snd_hwdep thinkpad_acpi snd_pcm snd_mixer_oss sr_mod hwmon usbcore snd_timer sg cfg80211 snd tpm_tis soundcore i2c_i801 tpm tpm_bios nvram cdrom snd_page_alloc e1000e intel_ips joydev rfkill wmi mac_hid kvm_intel pcspkr kvm rtc_cmos rtc_core rtc_lib
[ 21.292255] Pid: 2146, comm: syslog-ng Not tainted 2.6.38-rc2-00274-g1f0324c #59
[ 21.292258] Call Trace:
[ 21.292267] [<ffffffff81039ac4>] ? warn_slowpath_common+0x80/0x98
[ 21.292276] [<ffffffff81120950>] ? kmsg_release+0x0/0x18
[ 21.292282] [<ffffffff81039b70>] ? warn_slowpath_fmt+0x41/0x43
[ 21.292289] [<ffffffff8111cde6>] ? proc_lookup_de+0xae/0xca
[ 21.292295] [<ffffffff8103a3d9>] ? do_syslog+0x427/0x452
[ 21.292301] [<ffffffff81118224>] ? proc_root_lookup+0x1b/0x3b
[ 21.292308] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292313] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292319] [<ffffffff81120950>] ? kmsg_release+0x0/0x18
[ 21.292325] [<ffffffff8112097f>] ? kmsg_open+0x17/0x19
[ 21.292332] [<ffffffff81117963>] ? proc_reg_open+0xa3/0x144
[ 21.292337] [<ffffffff81120968>] ? kmsg_open+0x0/0x19
[ 21.292343] [<ffffffff811178c0>] ? proc_reg_open+0x0/0x144
[ 21.292351] [<ffffffff810cffa4>] ? __dentry_open+0x168/0x282
[ 21.292357] [<ffffffff81032c2a>] ? sub_preempt_count+0x92/0xa5
[ 21.292363] [<ffffffff810d0d02>] ? nameidata_to_filp+0x50/0x57
[ 21.292370] [<ffffffff810dcedc>] ? finish_open+0x9d/0x16a
[ 21.292375] [<ffffffff810dc8a5>] ? do_path_lookup+0x8b/0xf2
[ 21.292381] [<ffffffff810dd41b>] ? do_filp_open+0x189/0x671
[ 21.292387] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292393] [<ffffffff81032c2a>] ? sub_preempt_count+0x92/0xa5
[ 21.292401] [<ffffffff810e88b4>] ? vfsmount_lock_local_unlock+0x2b/0x48
[ 21.292406] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292412] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292417] [<ffffffff81032c2a>] ? sub_preempt_count+0x92/0xa5
[ 21.292427] [<ffffffff813d3d0a>] ? _raw_spin_unlock+0x10/0x2b
[ 21.292433] [<ffffffff810e78d2>] ? alloc_fd+0x106/0x118
[ 21.292440] [<ffffffff811f735d>] ? strncpy_from_user+0x34/0x37
[ 21.292446] [<ffffffff810d0d64>] ? do_sys_open+0x5b/0xf4
[ 21.292452] [<ffffffff810d0e18>] ? sys_open+0x1b/0x1d
[ 21.292458] [<ffffffff8100293b>] ? system_call_fastpath+0x16/0x1b
[ 21.292463] ---[ end trace d71955adaf8dccff ]---
[ 21.509339] NET: Registered protocol family 10
[ 21.515752] sshd (2181): /proc/2181/oom_adj is deprecated, please use /proc/2181/oom_score_adj instead.
[ 36.453766] Console: switching to colour frame buffer device 160x50
[ 48.999091] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 49.049813] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 49.050517] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.914871] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[ 50.914876] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 50.915226] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 50.915297] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[ 50.915302] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 61.815638] eth0: no IPv6 routers present
[ 108.887226] RPC: Registered udp transport module.
[ 108.887229] RPC: Registered tcp transport module.
[ 108.887230] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 108.924792] FS-Cache: Loaded
[ 108.962925] Registering the id_resolver key type
[ 108.962940] FS-Cache: Netfs 'nfs' registered for caching
[ 177.492520] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 322.591079] cupsd[2269]: segfault at 0 ip 00007fa7784d878d sp 00007fffa04cd9f0 error 4 in cupsd[7fa77849c000+62000]
[10625.174444] usb 1-1.4: USB disconnect, address 4
[10625.284218] PM: Syncing filesystems ... done.
[10625.834442] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10625.845423] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10625.856526] Suspending console(s) (use no_console_suspend to debug)
[10626.048024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10626.103618] sd 0:0:0:0: [sda] Stopping disk
[10626.297920] ehci_hcd 0000:00:1d.0: PCI INT D disabled
[10626.297977] ehci_hcd 0000:00:1a.0: PCI INT D disabled
[10626.312559] i915 0000:00:02.0: power state changed by ACPI to D3
[10626.485306] e1000e 0000:00:19.0: PCI INT A disabled
[10626.485314] e1000e 0000:00:19.0: PME# enabled
[10626.485324] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[10626.499618] HDA Intel 0000:00:1b.0: PCI INT B disabled
[10626.757929] PM: suspend of devices complete after 902.672 msecs
[10626.779830] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[10626.795740] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[10626.795895] PM: late suspend of devices complete after 38.026 msecs
[10626.796035] ACPI: Preparing to enter system sleep state S3
[10626.845741] PM: Saving platform NVS memory
[10626.850448] Disabling non-boot CPUs ...
[10626.865289] CPU 1 is now offline
[10626.882930] CPU 2 is now offline
[10626.892768] CPU 3 is now offline
[10626.893096] Extended CMOS year: 2000
[10626.893374] Back to C!
[10626.893378] PM: Restoring platform NVS memory
[10626.893997] Extended CMOS year: 2000
[10626.894018] Enabling non-boot CPUs ...
[10626.895455] Booting Node 0 Processor 1 APIC 0x1
[10626.987292] Switched to NOHz mode on CPU #1
[10627.007406] CPU1 is up
[10627.007497] Booting Node 0 Processor 2 APIC 0x4
[10627.099072] Switched to NOHz mode on CPU #2
[10627.119186] CPU2 is up
[10627.119283] Booting Node 0 Processor 3 APIC 0x5
[10627.210944] Switched to NOHz mode on CPU #3
[10627.231145] CPU3 is up
[10627.232516] ACPI: Waking up from system sleep state S3
[10627.314895] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900006, writing 0x20900006)
[10627.314910] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[10627.315020] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[10627.315038] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2728000)
[10627.315046] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[10627.319740] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10627.319751] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10627.319869] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[10627.319964] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b)
[10627.319975] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[10627.319979] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf240f240)
[10627.319983] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0x200000f0)
[10627.319992] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10627.319998] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[10627.320033] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[10627.320052] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2728400)
[10627.320059] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[10627.320077] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10627.320081] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10627.320190] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[10627.320256] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[10627.320278] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[10627.320554] PM: early resume of devices complete after 5.785 msecs
[10627.320878] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10627.320888] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[10627.320905] e1000e 0000:00:19.0: PME# disabled
[10627.320910] pci 0000:00:1e.0: setting latency timer to 64
[10627.321001] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10627.321019] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[10627.321034] HDA Intel 0000:00:1b.0: setting latency timer to 64
[10627.321104] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[10627.321184] ahci 0000:00:1f.2: setting latency timer to 64
[10627.321187] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10627.321190] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10627.321204] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[10627.321207] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[10627.321224] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[10627.321230] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[10627.321312] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[10627.321357] i915 0000:00:02.0: power state changed by ACPI to D0
[10627.321363] i915 0000:00:02.0: power state changed by ACPI to D0
[10627.321369] i915 0000:00:02.0: setting latency timer to 64
[10627.322724] sd 0:0:0:0: [sda] Starting disk
[10627.345649] intel ips 0000:00:1f.6: MCP limit exceeded: Avg temp 20425, limit 9000
[10627.516702] [drm:ironlake_fdi_link_train] *ERROR* FDI train 1 fail!
[10627.516862] [drm:ironlake_fdi_link_train] *ERROR* FDI train 2 fail!
[10627.535575] usb 1-1.3: reset full speed USB device using ehci_hcd and address 3
[10627.570055] [drm:ironlake_fdi_link_train] *ERROR* FDI train 1 fail!
[10627.570215] [drm:ironlake_fdi_link_train] *ERROR* FDI train 2 fail!
[10627.627184] ata6: SATA link down (SStatus 0 SControl 300)
[10627.630195] ata5: SATA link down (SStatus 0 SControl 300)
[10627.662174] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[10627.662179] PM: Device 00:0c failed to resume: error -19
[10627.675185] No ACPI video bus found
[10627.693364] usb 1-1.6: reset high speed USB device using ehci_hcd and address 6
[10627.780006] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10627.785389] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[10627.786320] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[10627.796706] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[10627.797613] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[10627.801510] ata2.00: configured for UDMA/133
[10627.855081] usb 2-1.1: reset high speed USB device using ehci_hcd and address 3
[10629.035816] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[10629.035819] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[10629.276289] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000
[10629.276299] serio: Synaptics pass-through port at isa0060/serio1/input0
[10629.327832] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[10630.942458] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10630.957475] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10630.957483] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10630.957489] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10630.962179] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10630.962185] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10630.962191] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10630.964958] ata1.00: configured for UDMA/133
[10630.990593] PM: resume of devices complete after 3676.263 msecs
[10630.990767] Restarting tasks ... done.
[10631.589470] usb 1-1.4: new full speed USB device using ehci_hcd and address 8
[10636.013771] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[10636.275203] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio3/input/input11
[-- Attachment #4: 2.6.38-rc2-00274-g1f0324c.xorg --]
[-- Type: text/plain, Size: 32160 bytes --]
[ 36.065]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 36.067] X Protocol Version 11, Revision 0
[ 36.067] Build Operating System: Linux 2.6.35-ARCH x86_64
[ 36.067] Current Operating System: Linux kr 2.6.38-rc2-00274-g1f0324c #59 SMP PREEMPT Fri Jan 28 22:18:04 CET 2011 x86_64
[ 36.067] Kernel command line:
[ 36.067] Build Date: 01 November 2010 10:29:19PM
[ 36.068]
[ 36.068] Current version of pixman: 0.20.2
[ 36.068] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 36.068] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.070] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 29 22:45:54 2011
[ 36.087] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 36.090] (==) No Layout section. Using the first Screen section.
[ 36.090] (==) No screen section available. Using defaults.
[ 36.090] (**) |-->Screen "Default Screen Section" (0)
[ 36.090] (**) | |-->Monitor "<default monitor>"
[ 36.090] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 36.090] (==) Automatically adding devices
[ 36.090] (==) Automatically enabling devices
[ 36.104] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 36.104] Entry deleted from font path.
[ 36.113] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 36.113] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 36.113] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 36.113] (II) Loader magic: 0x7d3360
[ 36.113] (II) Module ABI versions:
[ 36.113] X.Org ANSI C Emulation: 0.4
[ 36.113] X.Org Video Driver: 8.0
[ 36.113] X.Org XInput driver : 11.0
[ 36.113] X.Org Server Extension : 4.0
[ 36.114] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 36.114] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 36.114] (II) LoadModule: "extmod"
[ 36.122] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 36.125] (II) Module extmod: vendor="X.Org Foundation"
[ 36.125] compiled for 1.9.2, module version = 1.0.0
[ 36.125] Module class: X.Org Server Extension
[ 36.125] ABI class: X.Org Server Extension, version 4.0
[ 36.125] (II) Loading extension MIT-SCREEN-SAVER
[ 36.126] (II) Loading extension XFree86-VidModeExtension
[ 36.126] (II) Loading extension XFree86-DGA
[ 36.126] (II) Loading extension DPMS
[ 36.126] (II) Loading extension XVideo
[ 36.126] (II) Loading extension XVideo-MotionCompensation
[ 36.126] (II) Loading extension X-Resource
[ 36.126] (II) LoadModule: "dbe"
[ 36.126] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 36.128] (II) Module dbe: vendor="X.Org Foundation"
[ 36.128] compiled for 1.9.2, module version = 1.0.0
[ 36.128] Module class: X.Org Server Extension
[ 36.128] ABI class: X.Org Server Extension, version 4.0
[ 36.128] (II) Loading extension DOUBLE-BUFFER
[ 36.128] (II) LoadModule: "glx"
[ 36.129] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.148] (II) Module glx: vendor="X.Org Foundation"
[ 36.148] compiled for 1.9.2, module version = 1.0.0
[ 36.148] ABI class: X.Org Server Extension, version 4.0
[ 36.149] (==) AIGLX enabled
[ 36.149] (II) Loading extension GLX
[ 36.152] (II) LoadModule: "record"
[ 36.153] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 36.153] (II) Module record: vendor="X.Org Foundation"
[ 36.153] compiled for 1.9.2, module version = 1.13.0
[ 36.153] Module class: X.Org Server Extension
[ 36.153] ABI class: X.Org Server Extension, version 4.0
[ 36.153] (II) Loading extension RECORD
[ 36.153] (II) LoadModule: "dri"
[ 36.154] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 36.167] (II) Module dri: vendor="X.Org Foundation"
[ 36.167] compiled for 1.9.2, module version = 1.0.0
[ 36.167] ABI class: X.Org Server Extension, version 4.0
[ 36.167] (II) Loading extension XFree86-DRI
[ 36.167] (II) LoadModule: "dri2"
[ 36.167] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 36.167] (II) Module dri2: vendor="X.Org Foundation"
[ 36.167] compiled for 1.9.2, module version = 1.2.0
[ 36.167] ABI class: X.Org Server Extension, version 4.0
[ 36.167] (II) Loading extension DRI2
[ 36.168] (==) Matched intel as autoconfigured driver 0
[ 36.168] (==) Matched vesa as autoconfigured driver 1
[ 36.168] (==) Matched fbdev as autoconfigured driver 2
[ 36.168] (==) Assigned the driver to the xf86ConfigLayout
[ 36.168] (II) LoadModule: "intel"
[ 36.168] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 36.188] (II) Module intel: vendor="X.Org Foundation"
[ 36.188] compiled for 1.9.0.901, module version = 2.13.0
[ 36.188] Module class: X.Org Video Driver
[ 36.188] ABI class: X.Org Video Driver, version 8.0
[ 36.188] (II) LoadModule: "vesa"
[ 36.189] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 36.190] (II) Module vesa: vendor="X.Org Foundation"
[ 36.190] compiled for 1.9.0, module version = 2.3.0
[ 36.190] Module class: X.Org Video Driver
[ 36.190] ABI class: X.Org Video Driver, version 8.0
[ 36.190] (II) LoadModule: "fbdev"
[ 36.190] (WW) Warning, couldn't open module fbdev
[ 36.190] (II) UnloadModule: "fbdev"
[ 36.190] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 36.191] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 36.191] (II) VESA: driver for VESA chipsets: vesa
[ 36.191] (--) using VT number 7
[ 36.220] (WW) Falling back to old probe method for vesa
[ 36.220] drmOpenDevice: node name is /dev/dri/card0
[ 36.220] drmOpenDevice: open result is 8, (OK)
[ 36.327] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 36.328] drmOpenDevice: node name is /dev/dri/card0
[ 36.328] drmOpenDevice: open result is 8, (OK)
[ 36.328] drmOpenByBusid: drmOpenMinor returns 8
[ 36.328] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 36.328] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 36.328] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 36.328] (==) intel(0): RGB weight 888
[ 36.328] (==) intel(0): Default visual is TrueColor
[ 36.328] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 36.328] (--) intel(0): Chipset: "Arrandale"
[ 36.328] (**) intel(0): Tiling enabled
[ 36.328] (**) intel(0): SwapBuffers wait enabled
[ 36.328] (==) intel(0): video overlay key set to 0x101fe
[ 36.330] (II) intel(0): Output LVDS1 has no monitor section
[ 36.331] (II) intel(0): found backlight control interface /sys/class/backlight/thinkpad_screen
[ 36.331] (II) intel(0): Output VGA1 has no monitor section
[ 36.454] (II) intel(0): Output HDMI1 has no monitor section
[ 36.455] (II) intel(0): Output DP1 has no monitor section
[ 36.455] (II) intel(0): EDID for output LVDS1
[ 36.455] (II) intel(0): Manufacturer: LEN Model: 4011 Serial#: 0
[ 36.455] (II) intel(0): Year: 2009 Week: 1
[ 36.455] (II) intel(0): EDID Version: 1.3
[ 36.455] (II) intel(0): Digital Display Input
[ 36.455] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
[ 36.455] (II) intel(0): Gamma: 2.20
[ 36.455] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 36.455] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.455] (II) intel(0): First detailed timing is preferred mode
[ 36.455] (II) intel(0): redX: 0.560 redY: 0.350 greenX: 0.345 greenY: 0.560
[ 36.455] (II) intel(0): blueX: 0.150 blueY: 0.105 whiteX: 0.313 whiteY: 0.329
[ 36.456] (II) intel(0): Manufacturer's mask: 0
[ 36.456] (II) intel(0): Supported detailed timing:
[ 36.456] (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm
[ 36.456] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1403 h_border: 0
[ 36.456] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 821 v_border: 0
[ 36.456] (II) intel(0): Supported detailed timing:
[ 36.456] (II) intel(0): clock: 57.6 MHz Image Size: 261 x 163 mm
[ 36.456] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1403 h_border: 0
[ 36.456] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 821 v_border: 0
[ 36.456] (II) intel(0): Unknown vendor-specific block f
[ 36.456] (II) intel(0): B121EW09 V3
[ 36.456] (II) intel(0): EDID (in hex):
[ 36.456] (II) intel(0): 00ffffffffffff0030ae114000000000
[ 36.456] (II) intel(0): 01130103801a1078ea65858f59588f26
[ 36.456] (II) intel(0): 1b505400000001010101010101010101
[ 36.456] (II) intel(0): 010101010101121b007b502015303020
[ 36.456] (II) intel(0): 360005a3100000187f16007b50201530
[ 36.456] (II) intel(0): 3020360005a3100000180000000f0081
[ 36.456] (II) intel(0): 0a3c810a3216090006af5633000000fe
[ 36.456] (II) intel(0): 004231323145573039205633200a009b
[ 36.456] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 36.456] (II) intel(0): Printing DDC gathered Modelines:
[ 36.456] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (49.4 kHz)
[ 36.456] (II) intel(0): Modeline "1280x800"x0.0 57.59 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (41.0 kHz)
[ 36.457] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 36.457] (II) intel(0): Printing probed modes for output LVDS1
[ 36.457] (II) intel(0): Modeline "1280x800"x60.2 69.30 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (49.4 kHz)
[ 36.457] (II) intel(0): Modeline "1280x800"x50.0 57.59 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (41.0 kHz)
[ 36.457] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 36.457] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 36.457] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 36.457] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 36.457] (II) intel(0): EDID for output VGA1
[ 36.581] (II) intel(0): EDID for output HDMI1
[ 36.581] (II) intel(0): Manufacturer: SAM Model: 5c4 Serial#: 1162228275
[ 36.581] (II) intel(0): Year: 2009 Week: 46
[ 36.581] (II) intel(0): EDID Version: 1.3
[ 36.581] (II) intel(0): Digital Display Input
[ 36.581] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 36.581] (II) intel(0): Gamma: 2.20
[ 36.581] (II) intel(0): DPMS capabilities: Off
[ 36.581] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.581] (II) intel(0): First detailed timing is preferred mode
[ 36.581] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.150 greenY: 0.060
[ 36.581] (II) intel(0): blueX: 0.300 blueY: 0.600 whiteX: 0.312 whiteY: 0.329
[ 36.581] (II) intel(0): Supported established timings:
[ 36.581] (II) intel(0): 640x480@60Hz
[ 36.581] (II) intel(0): 800x600@56Hz
[ 36.581] (II) intel(0): 800x600@60Hz
[ 36.581] (II) intel(0): 1024x768@60Hz
[ 36.581] (II) intel(0): Manufacturer's mask: 0
[ 36.581] (II) intel(0): Supported standard timings:
[ 36.581] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 36.581] (II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 36.581] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 36.581] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 36.581] (II) intel(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 36.581] (II) intel(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 36.581] (II) intel(0): Supported detailed timing:
[ 36.581] (II) intel(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 36.581] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 36.581] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 36.582] (II) intel(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 36.582] (II) intel(0): Monitor name: SyncMaster
[ 36.582] (II) intel(0): Serial No: H9MSB08508
[ 36.582] (II) intel(0): EDID (in hex):
[ 36.582] (II) intel(0): 00ffffffffffff004c2dc40533324645
[ 36.582] (II) intel(0): 2e13010380331d782ae9e1a354260f4c
[ 36.582] (II) intel(0): 9950542308008100814081809500a940
[ 36.582] (II) intel(0): b30001010101023a801871382d40582c
[ 36.582] (II) intel(0): 4500fe1f1100001e000000fd00383c1e
[ 36.582] (II) intel(0): 5111000a202020202020000000fc0053
[ 36.582] (II) intel(0): 796e634d61737465720a2020000000ff
[ 36.582] (II) intel(0): 0048394d534230383530380a20200041
[ 36.582] (II) intel(0): Printing probed modes for output HDMI1
[ 36.582] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 36.582] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 36.582] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 36.582] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 36.582] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 36.582] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 36.582] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 36.582] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 36.582] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 36.582] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 36.582] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 36.583] (II) intel(0): EDID for output DP1
[ 36.583] (II) intel(0): Output LVDS1 connected
[ 36.583] (II) intel(0): Output VGA1 disconnected
[ 36.583] (II) intel(0): Output HDMI1 connected
[ 36.583] (II) intel(0): Output DP1 disconnected
[ 36.583] (II) intel(0): Using exact sizes for initial modes
[ 36.583] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 36.583] (II) intel(0): Output HDMI1 using initial mode 1280x800
[ 36.583] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 36.583] (II) intel(0): Kernel page flipping support detected, enabling
[ 36.583] (**) intel(0): Display dimensions: (260, 160) mm
[ 36.583] (**) intel(0): DPI set to (125, 127)
[ 36.583] (II) Loading sub module "fb"
[ 36.583] (II) LoadModule: "fb"
[ 36.584] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.587] (II) Module fb: vendor="X.Org Foundation"
[ 36.587] compiled for 1.9.2, module version = 1.0.0
[ 36.587] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.587] (II) UnloadModule: "vesa"
[ 36.587] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 36.587] (==) Depth 24 pixmap format is 32 bpp
[ 36.588] (==) intel(0): VideoRam: 262144 KB
[ 36.588] (II) intel(0): [DRI2] Setup complete
[ 36.588] (II) intel(0): [DRI2] DRI driver: i965
[ 36.588] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 36.604] (II) UXA(0): Driver registered support for the following operations:
[ 36.604] (II) solid
[ 36.604] (II) copy
[ 36.604] (II) composite (RENDER acceleration)
[ 36.604] (II) put_image
[ 36.604] (II) get_image
[ 36.604] (==) intel(0): Backing store disabled
[ 36.604] (==) intel(0): Silken mouse enabled
[ 36.605] (II) intel(0): Initializing HW Cursor
[ 36.802] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 36.802] (==) intel(0): DPMS enabled
[ 36.802] (==) intel(0): Intel XvMC decoder enabled
[ 36.802] (II) intel(0): Set up textured video
[ 36.802] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 36.802] (II) intel(0): direct rendering: DRI2 Enabled
[ 36.803] (--) RandR disabled
[ 36.803] (II) Initializing built-in extension Generic Event Extension
[ 36.803] (II) Initializing built-in extension SHAPE
[ 36.803] (II) Initializing built-in extension MIT-SHM
[ 36.803] (II) Initializing built-in extension XInputExtension
[ 36.803] (II) Initializing built-in extension XTEST
[ 36.803] (II) Initializing built-in extension BIG-REQUESTS
[ 36.803] (II) Initializing built-in extension SYNC
[ 36.803] (II) Initializing built-in extension XKEYBOARD
[ 36.803] (II) Initializing built-in extension XC-MISC
[ 36.803] (II) Initializing built-in extension SECURITY
[ 36.803] (II) Initializing built-in extension XINERAMA
[ 36.803] (II) Initializing built-in extension XFIXES
[ 36.803] (II) Initializing built-in extension RENDER
[ 36.803] (II) Initializing built-in extension RANDR
[ 36.803] (II) Initializing built-in extension COMPOSITE
[ 36.803] (II) Initializing built-in extension DAMAGE
[ 36.884] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 36.884] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 36.884] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 36.884] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 36.884] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 36.885] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 36.885] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 36.885] (II) intel(0): Setting screen physical size to 338 x 211
[ 37.154] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 37.154] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 37.154] (II) LoadModule: "evdev"
[ 37.154] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 37.155] (II) Module evdev: vendor="X.Org Foundation"
[ 37.155] compiled for 1.9.0, module version = 2.5.0
[ 37.155] Module class: X.Org XInput Driver
[ 37.155] ABI class: X.Org XInput driver, version 11.0
[ 37.156] (**) Power Button: always reports core events
[ 37.156] (**) Power Button: Device: "/dev/input/event2"
[ 37.165] (--) Power Button: Found keys
[ 37.165] (II) Power Button: Configuring as keyboard
[ 37.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 37.165] (**) Option "xkb_rules" "evdev"
[ 37.165] (**) Option "xkb_model" "evdev"
[ 37.165] (**) Option "xkb_layout" "us"
[ 37.205] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 37.205] (II) No input driver/identifier specified (ignoring)
[ 37.205] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 37.205] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 37.205] (**) Sleep Button: always reports core events
[ 37.205] (**) Sleep Button: Device: "/dev/input/event1"
[ 37.210] (--) Sleep Button: Found keys
[ 37.210] (II) Sleep Button: Configuring as keyboard
[ 37.210] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 37.210] (**) Option "xkb_rules" "evdev"
[ 37.210] (**) Option "xkb_model" "evdev"
[ 37.210] (**) Option "xkb_layout" "us"
[ 37.215] (II) config/udev: Adding input device Integrated Camera (/dev/input/event9)
[ 37.215] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 37.215] (**) Integrated Camera: always reports core events
[ 37.215] (**) Integrated Camera: Device: "/dev/input/event9"
[ 37.220] (--) Integrated Camera: Found keys
[ 37.220] (II) Integrated Camera: Configuring as keyboard
[ 37.220] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 37.220] (**) Option "xkb_rules" "evdev"
[ 37.220] (**) Option "xkb_model" "evdev"
[ 37.220] (**) Option "xkb_layout" "us"
[ 37.220] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 37.220] (II) No input driver/identifier specified (ignoring)
[ 37.227] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 37.227] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 37.227] (**) AT Translated Set 2 keyboard: always reports core events
[ 37.227] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 37.233] (--) AT Translated Set 2 keyboard: Found keys
[ 37.233] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 37.233] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 37.233] (**) Option "xkb_rules" "evdev"
[ 37.233] (**) Option "xkb_model" "evdev"
[ 37.233] (**) Option "xkb_layout" "us"
[ 37.233] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 37.233] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 37.234] (II) LoadModule: "synaptics"
[ 37.234] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 37.236] (II) Module synaptics: vendor="X.Org Foundation"
[ 37.236] compiled for 1.9.2, module version = 1.3.0
[ 37.236] Module class: X.Org XInput Driver
[ 37.236] ABI class: X.Org XInput driver, version 11.0
[ 37.236] (II) Synaptics touchpad driver version 1.3.0
[ 37.236] (**) Option "Device" "/dev/input/event4"
[ 37.267] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 37.267] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4810
[ 37.267] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 37.267] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 37.267] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 37.267] (**) Option "TapButton1" "1"
[ 37.267] (**) Option "TapButton2" "2"
[ 37.267] (**) Option "TapButton3" "3"
[ 37.288] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 37.288] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 37.297] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 37.297] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 37.297] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 37.312] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 37.312] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 37.312] (II) No input driver/identifier specified (ignoring)
[ 37.312] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
[ 37.312] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 37.312] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 37.312] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event5"
[ 37.320] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 37.320] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 37.320] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 37.320] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 37.320] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 37.320] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 37.320] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 37.320] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 37.320] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 37.320] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 37.320] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 37.320] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 37.320] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 37.321] (II) No input driver/identifier specified (ignoring)
[ 37.321] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 37.321] (II) No input driver/identifier specified (ignoring)
[ 37.321] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
[ 37.321] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 37.321] (**) ThinkPad Extra Buttons: always reports core events
[ 37.321] (**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
[ 37.325] (--) ThinkPad Extra Buttons: Found keys
[ 37.325] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 37.325] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 37.325] (**) Option "xkb_rules" "evdev"
[ 37.325] (**) Option "xkb_model" "evdev"
[ 37.325] (**) Option "xkb_layout" "us"
[ 59.626] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 59.626] (II) intel(0): Printing DDC gathered Modelines:
[ 59.626] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (49.4 kHz)
[ 59.626] (II) intel(0): Modeline "1280x800"x0.0 57.59 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (41.0 kHz)
[ 59.752] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled
[ 10643.755] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 10649.023] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 10649.190] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 10649.190] (II) intel(0): Printing DDC gathered Modelines:
[ 10649.190] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (49.4 kHz)
[ 10649.190] (II) intel(0): Modeline "1280x800"x0.0 57.59 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (41.0 kHz)
[ 10649.378] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 10649.378] (EE) Unable to open evdev device "/dev/input/event5".
[ 10649.378] [dix] couldn't enable device 11
[ 10649.404] (II) config/udev: removing device TPPS/2 IBM TrackPoint
[ 10649.404] (II) TPPS/2 IBM TrackPoint: Close
[ 10649.404] (II) UnloadModule: "evdev"
[ 10649.406] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[ 10649.435] (II) UnloadModule: "synaptics"
[ 10649.443] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 10649.443] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 10649.443] (II) Synaptics touchpad driver version 1.3.0
[ 10649.443] (**) Option "Device" "/dev/input/event4"
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4810
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 10649.485] (**) Option "TapButton1" "1"
[ 10649.485] (**) Option "TapButton2" "2"
[ 10649.485] (**) Option "TapButton3" "3"
[ 10649.522] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 10649.522] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10649.535] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10649.561] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 10649.561] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 10649.562] (II) No input driver/identifier specified (ignoring)
[ 10654.331] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 10654.331] (II) No input driver/identifier specified (ignoring)
[ 10654.331] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
[ 10654.331] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 10654.331] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 10654.331] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event5"
[ 10654.336] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 10654.336] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 10654.336] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 10654.336] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 10654.336] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 10654.336] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10654.336] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 10654.336] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 10654.336] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 10654.336] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 10654.336] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 10654.336] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30)
2011-01-30 12:08 ` Nico Schottelius
@ 2011-01-30 12:25 ` Chris Wilson
0 siblings, 0 replies; 6+ messages in thread
From: Chris Wilson @ 2011-01-30 12:25 UTC (permalink / raw)
To: Nico Schottelius; +Cc: Nico Schottelius, LKML
On Sun, 30 Jan 2011 13:08:53 +0100, Nico Schottelius <nico-kernel-20110117@schottelius.org> wrote:
> [10627.321357] i915 0000:00:02.0: power state changed by ACPI to D0
> [10627.321363] i915 0000:00:02.0: power state changed by ACPI to D0
> [10627.321369] i915 0000:00:02.0: setting latency timer to 64
> [10627.322724] sd 0:0:0:0: [sda] Starting disk
> [10627.345649] intel ips 0000:00:1f.6: MCP limit exceeded: Avg temp 20425, limit 9000
> [10627.516702] [drm:ironlake_fdi_link_train] *ERROR* FDI train 1 fail!
> [10627.516862] [drm:ironlake_fdi_link_train] *ERROR* FDI train 2 fail!
> [10627.535575] usb 1-1.3: reset full speed USB device using ehci_hcd and address 3
> [10627.570055] [drm:ironlake_fdi_link_train] *ERROR* FDI train 1 fail!
> [10627.570215] [drm:ironlake_fdi_link_train] *ERROR* FDI train 2 fail!
So upon resume we fail to setup the connection between the CPU and PCH,
which would cause a broken display.
Now we haven't directly modified the FDI training in the .38 cycle, but we
have tweaked and enabled various power saving features for Ironlake that
have proven to be unstable in the past. (Hence why we had to disable them
but the obvious problems had been fixed...)
This should hopefully find the culprit:
$ git bisect start drivers/gpu/drm/i915/intel_display.c
$ git bisect good v2.6.37
$ git bisect bad
Thanks,
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: New display errors in 2.6.38-rc2-00175-g6fb1b30
2011-01-28 20:29 New display errors in 2.6.38-rc2-00175-g6fb1b30 Nico Schottelius
2011-01-30 10:32 ` More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30) Nico Schottelius
@ 2011-02-02 20:28 ` Maciej Rutecki
1 sibling, 0 replies; 6+ messages in thread
From: Maciej Rutecki @ 2011-02-02 20:28 UTC (permalink / raw)
To: Nico Schottelius; +Cc: LKML
On piątek, 28 stycznia 2011 o 21:29:05 Nico Schottelius wrote:
> Hey hackers!
>
> With 2.6.38-rc2-00175-g6fb1b30 I get a new version of broken
> display I've never seen before: The display looks like a misconfigured
> tv after 2-3 suspends. Switching to a different tty was possible (though
> still same broken display, but allowed a reboot) one time, the other time
> the system completly froze.
>
> 2.6.37, 2.6.37-05761-gf878133 and 2.6.37-07956-g8c34482 do not have this
> bug.
>
> Cheers,
>
> Nico
I created a Bugzilla entry at
https://bugzilla.kernel.org/show_bug.cgi?id=28102
for your bug report, please add your address to the CC list in there, thanks!
--
Maciej Rutecki
http://www.maciek.unixy.pl
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-02-02 20:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-28 20:29 New display errors in 2.6.38-rc2-00175-g6fb1b30 Nico Schottelius
2011-01-30 10:32 ` More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30) Nico Schottelius
2011-01-30 11:32 ` Chris Wilson
2011-01-30 12:08 ` Nico Schottelius
2011-01-30 12:25 ` Chris Wilson
2011-02-02 20:28 ` New display errors in 2.6.38-rc2-00175-g6fb1b30 Maciej Rutecki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox