* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system @ 2009-08-07 22:51 devzero 2009-08-10 14:42 ` John Stoffel 0 siblings, 1 reply; 12+ messages in thread From: devzero @ 2009-08-07 22:51 UTC (permalink / raw) To: Martin Rogge; +Cc: linux-kernel >Box works works fine and very stable under 2.6.29.5 kernel, although >it is angry of buggy MP table (see app. #2 below). But sometimes, this >kernel correctly reboots the system at all, but this happens very >rarely. In most cases, nobody detects the box was rebooted. And this >is satisfactory for me. so, what is it - stable or not stable ? if sometimes "this kernel correctly reboots the system", do you mean that happens spontaneously, i.e. without being actively triggered ? how can this box work fine then or at least being considered "stable" then ? there is already an issue there, and if it behaves different with 2.6.30, it may be that the newer kernel triggers the existing problem in a different way. >As I said earlier, bisecting may be unpractical, because each iteration may >take days or weeks. afaik, you can also bisect on a different (i.e. faster) box. i think it would be more interesting if there is anything in dmesg on such lockup. if not, maybe you can hook up a serial console or netconsole and trigger sysrq when you have another lockup. regards roland List: linux-kernel Subject: 2.6.30.1-4 kernels freezes dual pentium-3 system From: ОÑОпПв СтаМОÑлав Date: 2009-08-03 8:44:26 Message-ID: 569920565.20090803124426 () mail ! ru [Download message RAW] I have a dual Pentium-3 system. It based on Asus CUR-DLS mainboard with 2 Pentium-3EB 1000MHz (133 MHz FSB) installed. Also, i'm using hardware RAID controller 3ware Escalade 7506-4LP, installed in the PCI-X expansion slot. This RAID is only one disk system in the box (RAID-5 on 4 IDE HDD 120GB from Seagate). Box works works fine and very stable under 2.6.29.5 kernel, although it is angry of buggy MP table (see app. #2 below). But sometimes, this kernel correctly reboots the system at all, but this happens very rarely. In most cases, nobody detects the box was rebooted. And this is satisfactory for me. But under 2.6.30.x kernels box freezes without any alerts. TTL before freezing is about 5-30 mins. I don't know why that shit happens. I'm ready to send any debug informations about this custom trouble, but if the specialists will request it with instructions for me. Appendix #1: lspci ====================================================================== 00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 05) 00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 05) 00:02.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev \ 08) 00:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] 00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50) 00:0f.1 IDE interface: Broadcom OSB4 IDE Controller 01:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet \ (rev 15) 01:03.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev \ 01) 01:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI \ Adapter (rev 01) 01:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 \ Ultra3 SCSI Adapter (rev 01) ________________________________________________________________ Neu: WEB.DE Doppel-FLAT mit Internet-Flatrate + Telefon-Flatrate für nur 19,99 Euro/mtl.!* http://produkte.web.de/go/02/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system 2009-08-07 22:51 2.6.30.1-4 kernels freezes dual pentium-3 system devzero @ 2009-08-10 14:42 ` John Stoffel 2009-08-18 14:40 ` John Stoffel 0 siblings, 1 reply; 12+ messages in thread From: John Stoffel @ 2009-08-10 14:42 UTC (permalink / raw) To: devzero; +Cc: Martin Rogge, linux-kernel >>>>> "devzero" == devzero <devzero@web.de> writes: >> Box works works fine and very stable under 2.6.29.5 kernel, although >> it is angry of buggy MP table (see app. #2 below). But sometimes, this >> kernel correctly reboots the system at all, but this happens very >> rarely. In most cases, nobody detects the box was rebooted. And this >> is satisfactory for me. devzero> so, what is it - stable or not stable ? In my case, it's been stable under 2.6.29 (though with a Raid crash after 30+ days of uptime...). Under anything newer, it hasn't been stable, though I admit I haven't tried 2.6.29.x yet, though maybe 2.6.29.1 was ok. Not sure. devzero> if sometimes "this kernel correctly reboots the system", do devzero> you mean that happens spontaneously, i.e. without being devzero> actively triggered ? Kernel never reboots, the system locks up hard and *nothing* gets it back beyond the reset button. SysRq is total hosed, doesn't do anything. devzero> i think it would be more interesting if there is anything in devzero> dmesg on such lockup. if not, maybe you can hook up a serial devzero> console or netconsole and trigger sysrq when you have another devzero> lockup. There's notthing in dmesg, nothing on the screen (it's a server and not usually connected to a screen) and my other main machine is the NFS client of this box, so it's kinda painful to monitor. I need to try rigging up a completely standalone system to do both netconsole and serial port console to see if I catch anything. John ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system 2009-08-10 14:42 ` John Stoffel @ 2009-08-18 14:40 ` John Stoffel 2009-08-19 14:53 ` Vince Weaver 0 siblings, 1 reply; 12+ messages in thread From: John Stoffel @ 2009-08-18 14:40 UTC (permalink / raw) To: John Stoffel; +Cc: devzero, Martin Rogge, linux-kernel Just a quick followup, I've been doing a git bisect run over the past week or so trying to narrow this down. It's slow, since the system doesn't hang at any one point reliably. So I far, here's my git log: > git bisect log git bisect start # bad: [f4b9a988685da6386d7f9a72df3098bcc3270526] Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6 git bisect bad f4b9a988685da6386d7f9a72df3098bcc3270526 # good: [8e0ee43bc2c3e19db56a4adaa9a9b04ce885cd84] Linux 2.6.29 git bisect good 8e0ee43bc2c3e19db56a4adaa9a9b04ce885cd84 # bad: [095342389e2ed8deed07b3076f990260ce3c7c9f] perf_counter, x86: generic use of cpuc->active git bisect bad 095342389e2ed8deed07b3076f990260ce3c7c9f # bad: [095342389e2ed8deed07b3076f990260ce3c7c9f] perf_counter, x86: generic use of cpuc->active git bisect bad 095342389e2ed8deed07b3076f990260ce3c7c9f # bad: [095342389e2ed8deed07b3076f990260ce3c7c9f] perf_counter, x86: generic use of cpuc->active git bisect bad 095342389e2ed8deed07b3076f990260ce3c7c9f # bad: [095342389e2ed8deed07b3076f990260ce3c7c9f] perf_counter, x86: generic use of cpuc->active git bisect bad 095342389e2ed8deed07b3076f990260ce3c7c9f # bad: [ebc8eca169be0283d5a7ab54c4411dd59cfb0f27] Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Part of what slows me down is having to apply my patch to a scsi driver to ratelimit printks, otherwise I can spend over 30+ minutes waiting just for the console to scoll an endless stream of messages before it will continue to boot. Or even longer. :] More as I get closer. John ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system 2009-08-18 14:40 ` John Stoffel @ 2009-08-19 14:53 ` Vince Weaver 0 siblings, 0 replies; 12+ messages in thread From: Vince Weaver @ 2009-08-19 14:53 UTC (permalink / raw) To: John Stoffel; +Cc: devzero, Martin Rogge, linux-kernel I just wanted to add, I am seeing similar freezes on an ancient dual Pentium Pro system I have. I've been having issues tracking down the problem as well; often it locks up before I can complete building a kernel. Do you have perf enabled? I hope the lockup isn't somehow due to the enable p6 perf counters patches. Vince ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system
@ 2009-08-08 21:25 devzero
0 siblings, 0 replies; 12+ messages in thread
From: devzero @ 2009-08-08 21:25 UTC (permalink / raw)
To: linux-kernel, Martin Rogge
> > Aug 1 19:42:57 frya kernel: [...]
>
> Again, that's someone else's report.
ah - got it now.
take a look at: http://marc.info/?t=124928942600006&r=1&w=2
i mistakenly thought (while wondering about the corrupted mail header) you were starting that post, but you just jumped on that at the second post.
my fault, sorry.
________________________________________________________________
Neu: WEB.DE Doppel-FLAT mit Internet-Flatrate + Telefon-Flatrate
für nur 19,99 Euro/mtl.!* http://produkte.web.de/go/02/
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system @ 2009-08-08 9:49 devzero 2009-08-08 21:03 ` Martin Rogge 0 siblings, 1 reply; 12+ messages in thread From: devzero @ 2009-08-08 9:49 UTC (permalink / raw) To: linux-kernel, Martin Rogge > Roland, you seem to reply to a mix of different mails. i replied to this thread: http://marc.info/?t=124928942600006&r=1&w=2 > I skip the comments > unrelated to my error report. Btw, since then there have been two more reports > on lkml of dual P2 systems locking up with 2.6.30++. could you send pointers? any existing bugzilla bugentry for these or for your`s ? > > afaik, you can also bisect on a different (i.e. faster) box. > > Since we are talking about dual-P3, no you can't. ok, i missed your comment regarding duration of bisect iteration. but despite that, compiling on another/faster box and copy the kernel over is possible, afaik (and won`t help here) > > i think it would be more interesting if there is anything in dmesg on such > > I posted dmesg etc. yesterday yes, but that mostly contain bootup messages and there`s absolutely no trace from the freeze. it`s quite common, that after a lockup/crash some messages are lost, that`s why i asked if there is a chance to have serial console or netconsole attached. > Network, sysrq and numlock are all unresponsive. ok, that`s why we need to have the last informations from before the dying breath... btw, i one of your dmesg i found these: Aug 1 19:42:57 frya kernel: [ 0.000000] Linux version 2.6.30-gentoo-r4 \ Aug 1 19:42:57 frya kernel: [ 4.394755] ------------[ cut here ]------------ Aug 1 19:42:57 frya kernel: [ 4.399247] WARNING: at arch/x86/mm/ioremap.c:603 \ check_early_ioremap_leak+0x53/0x73() Aug 1 19:42:57 frya kernel: [ 4.408763] Hardware name: System Name Aug 1 19:42:57 frya kernel: [ 4.413574] Debug warning: early ioremap leak of 1 \ areas detected. Aug 1 19:42:57 frya kernel: [ 4.418561] Pid: 1, comm: swapper Not tainted \ 2.6.30-gentoo-r4 #1 Aug 1 19:42:57 frya kernel: [ 4.423552] Call Trace: Aug 1 19:42:57 frya kernel: [ 4.428379] [<c07c90b2>] ? \ check_early_ioremap_leak+0x53/0x73 Aug 1 19:42:57 frya kernel: [ 4.433238] [<c07c90b2>] ? \ check_early_ioremap_leak+0x53/0x73 Aug 1 19:42:57 frya kernel: [ 4.437821] [<c01316ac>] \ warn_slowpath_common+0x6c/0xc0 Aug 1 19:42:57 frya kernel: [ 4.442266] [<c07c90b2>] ? \ check_early_ioremap_leak+0x53/0x73 Aug 1 19:42:57 frya kernel: [ 4.446658] [<c07c905f>] ? \ check_early_ioremap_leak+0x0/0x73 Aug 1 19:42:57 frya kernel: [ 4.450880] [<c013174b>] warn_slowpath_fmt+0x2b/0x30 Aug 1 19:42:57 frya kernel: [ 4.455062] [<c07c90b2>] \ check_early_ioremap_leak+0x53/0x73 Aug 1 19:42:57 frya kernel: [ 4.459288] [<c010103f>] do_one_initcall+0x2f/0x160 Aug 1 19:42:57 frya kernel: [ 4.463528] [<c01e3d3a>] ? \ create_proc_entry+0x5a/0xb0 Aug 1 19:42:57 frya kernel: [ 4.467751] [<c015cfe5>] ? \ register_irq_proc+0xa5/0xc0 Aug 1 19:42:57 frya kernel: [ 4.471924] [<c015a1a8>] ? irq_to_desc+0x8/0x40 Aug 1 19:42:57 frya kernel: [ 4.476110] [<c015d075>] ? init_irq_proc+0x75/0x90 Aug 1 19:42:57 frya kernel: [ 4.480343] [<c07b95b5>] kernel_init+0x122/0x179 Aug 1 19:42:57 frya kernel: [ 4.484616] [<c07b9493>] ? kernel_init+0x0/0x179 Aug 1 19:42:57 frya kernel: [ 4.488860] [<c010397f>] \ kernel_thread_helper+0x7/0x10 Aug 1 19:42:57 frya kernel: [ 4.493137] ---[ end trace d2a1e0f2aa8609d9 ]--- Aug 1 19:42:57 frya kernel: [ 4.497524] please boot with early_ioremap_debug and \ report the dmesg. and: Aug 1 19:42:57 frya kernel: [ 0.121015] * The chipset may have PM-Timer Bug. Due \ to workarounds for a bug, Aug 1 19:42:57 frya kernel: [ 0.121020] * this clock source is slow. If you are \ sure your timer does not have Aug 1 19:42:57 frya kernel: [ 0.121024] * this bug, please use "acpi_pm_good" to \ disable the workaround Aug 1 19:42:57 frya kernel: [ 0.121563] * The chipset may have PM-Timer Bug. Due \ to workarounds for a bug, Aug 1 19:42:57 frya kernel: [ 0.121568] * this clock source is slow. If you are \ sure your timer does not have Aug 1 19:42:57 frya kernel: [ 0.121572] * this bug, please use "acpi_pm_good" to \ disable the workaround maybe it`s worth having a look at (on 2.6.29 and 2.6.30 system) /sys/devices/system/clocksource/clocksource0/current_clocksource /sys/devices/system/clocksource/clocksource0/available_clocksource and/or try specific clocksources with "clocksource=...." on boot (to see if it makes a difference). I have seen system freeze when the kernel detected an unstable clocksource and dynamically switched to another (more stable) one. roland ________________________________________________________________ Neu: WEB.DE Doppel-FLAT mit Internet-Flatrate + Telefon-Flatrate für nur 19,99 Euro/mtl.!* http://produkte.web.de/go/02/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system 2009-08-08 9:49 devzero @ 2009-08-08 21:03 ` Martin Rogge 0 siblings, 0 replies; 12+ messages in thread From: Martin Rogge @ 2009-08-08 21:03 UTC (permalink / raw) To: linux-kernel; +Cc: devzero On Saturday 08 August 2009 11:49:50 devzero@web.de wrote: > > Btw, since then there have been two more > > reports on lkml of dual P2 systems locking up with 2.6.30++. > > could you send pointers? Since I am not subscribed to the LKML (I only read it via a NNTP relay) I have some difficulties providing IDs. Anyway, the subject of the reports I have in mind is "PROBLEM: crash / hang with linux-2.6.30.x on PII-350 SMP system". > any existing bugzilla bugentry for these or for your`s ? Earlier today I filed bug 13933 on kernel.bugzilla. Unfortunately I had some problems attaching all the files, so my earlier LKML post is still the best source of information. > > Network, sysrq and numlock are all unresponsive. > > ok, that`s why we need to have the last informations from before the dying > breath... agreed. > > btw, i one of your dmesg i found these: > > Aug 1 19:42:57 frya kernel: [...] Again, that's someone else's report. Regarding clocksource, while I was trying to hunt down this bug I once booted with "clocksource=acpi_pm" but it made no difference. Truth be told, at that time I was still troubleshooting the nvidia.ko driver. Martin ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system @ 2009-08-08 8:19 Martin Rogge 0 siblings, 0 replies; 12+ messages in thread From: Martin Rogge @ 2009-08-08 8:19 UTC (permalink / raw) To: linux-kernel; +Cc: devzero devzero@web.de wrote: > Roland, you seem to reply to a mix of different mails. I skip the comments unrelated to my error report. Btw, since then there have been two more reports on lkml of dual P2 systems locking up with 2.6.30++. > afaik, you can also bisect on a different (i.e. faster) box. Since we are talking about dual-P3, no you can't. > i think it would be more interesting if there is anything in dmesg on such I posted dmesg etc. yesterday > lockup. if not, maybe you can hook up a serial console or netconsole and > trigger sysrq when you have another lockup. Network, sysrq and numlock are all unresponsive. Like it says in the Haiku: A crash reduces Your expensive computer To a simple stone. > > regards > roland Martin ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system
@ 2009-08-03 16:25 Martin Rogge
2009-08-07 20:29 ` Martin Rogge
0 siblings, 1 reply; 12+ messages in thread
From: Martin Rogge @ 2009-08-03 16:25 UTC (permalink / raw)
To: linux-kernel
Osipov Stanislav wrote:
> I have a dual Pentium-3 system. It based on Asus CUR-DLS mainboard
> with 2 Pentium-3EB 1000MHz (133 MHz FSB) installed.
>
> [...]
>
> But under 2.6.30.x kernels box freezes without any alerts. TTL before
> freezing is about 5-30 mins.
>
> [...]
>
> Thanks in advance,
>
> Osipov Stanislav
> Linux System Administrator.
I also observe system lockups after upgrading to 2.6.30.[34]. The mainboard is
an MSI-9105 with dual P-3 1400Mhz. TTL is a number of hours (which is going to
make bisecting hard). Since all lockups have occured with a tainted kernel
(nvidia) I am currently running a test with an untainted kernel. Should a
lockup re-occur I will post details.
Martin
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system 2009-08-03 16:25 Martin Rogge @ 2009-08-07 20:29 ` Martin Rogge 2009-08-10 14:38 ` John Stoffel 0 siblings, 1 reply; 12+ messages in thread From: Martin Rogge @ 2009-08-07 20:29 UTC (permalink / raw) To: linux-kernel [-- Attachment #1: Type: text/plain, Size: 1286 bytes --] On Monday 03 August 2009 18:25:27 Martin Rogge wrote: > Osipov Stanislav wrote: > > I have a dual Pentium-3 system. It based on Asus CUR-DLS mainboard > > with 2 Pentium-3EB 1000MHz (133 MHz FSB) installed. > > > > [...] > > > > But under 2.6.30.x kernels box freezes without any alerts. TTL before > > freezing is about 5-30 mins. > > > > [...] > > > > Thanks in advance, > > > > Osipov Stanislav > > Linux System Administrator. > > I also observe system lockups after upgrading to 2.6.30.[34]. The mainboard > is an MSI-9105 with dual P-3 1400Mhz. TTL is a number of hours (which is > going to make bisecting hard). Since all lockups have occured with a > tainted kernel (nvidia) I am currently running a test with an untainted > kernel. Should a lockup re-occur I will post details. > > Martin OK, I have observed the lockup now on a vanilla 2.6.30.4 kernel, unpatched & untainted. So it is now official: 2.6.30 can lock up on dual-P3s.:-( As I said earlier, bisecting may be unpractical, because each iteration may take days or weeks. I shall attach some information on my system. In the syslog, the freeze occured shortly after timestamp 20:20:43. There is nothing about it in the syslog, only the subsequent reboot. Please let me know how to proceed. Martin [-- Attachment #2: uname-a --] [-- Type: text/plain, Size: 142 bytes --] Linux arnold 2.6.30.4 #5 SMP PREEMPT Wed Aug 5 00:16:38 CEST 2009 i686 Intel(R) Pentium(R) III CPU family 1400MHz GenuineIntel GNU/Linux [-- Attachment #3: dmesg --] [-- Type: text/plain, Size: 22166 bytes --] Linux version 2.6.30.4 (root@arnold) (gcc version 4.3.3 (GCC) ) #5 SMP PREEMPT Wed Aug 5 00:16:38 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x7fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CAFFF write-protect CB000-EFFFF uncachable F0000-F7FFF write-through F8000-F8FFF uncachable F9000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0E0000000 mask FFC000000 write-combining 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000f75e0 00014 (v00 VIA694) ACPI: RSDT 7fff3000 0002C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 7fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 7fff30c0 02B9C (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) ACPI: FACS 7fff0000 00040 ACPI: APIC 7fff5c80 0005C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 1159MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000515350] TEXT DATA BSS ==> [0000100000 - 0000515350] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000516000 - 00005180ae] BRK ==> [0000516000 - 00005180ae] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f5bb0] f5bb0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fff0 On node 0 totalpages: 524175 free_area_init_node: node 0, pgdat c047a7e0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2320 pages used for memmap HighMem zone: 294626 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages at c200a000, static data 27940 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520079 Kernel command line: auto BOOT_IMAGE=Desktop ro root=306 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. NR_IRQS:320 CPU 0 irqstacks, hard=c200a000 soft=c200b000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1469.897 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:0007fff0) Memory: 2074208k/2097088k available (2504k kernel code, 21544k reserved, 1132k data, 284k init, 1187784k highmem) virtual kernel memory layout: fixmap : 0xfff9e000 - 0xfffff000 ( 388 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0492000 - 0xc04d9000 ( 284 kB) .data : 0xc037232f - 0xc048d360 (1132 kB) .text : 0xc0100000 - 0xc037232f (2504 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 2940.28 BogoMIPS (lpj=4899656) Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01 CPU 1 irqstacks, hard=c201a000 soft=c201b000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2940.28 BogoMIPS (lpj=4899655) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (5881.56 BogoMIPS). net_namespace: 504 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] pci 0000:00:01.0: supports D1 pci 0000:00:08.0: reg 10 32bit mmio: [0xef108000-0xef108fff] pci 0000:00:08.0: reg 14 io port: [0xa000-0xa03f] pci 0000:00:08.0: reg 18 32bit mmio: [0xef000000-0xef0fffff] pci 0000:00:08.0: reg 30 32bit mmio: [0x000000-0x0fffff] pci 0000:00:08.0: supports D1 D2 pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:0a.0: reg 10 io port: [0xa400-0xa4ff] pci 0000:00:0a.0: reg 14 32bit mmio: [0xef10b000-0xef10b0ff] pci 0000:00:0a.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: reg 10 32bit mmio: [0xef10d000-0xef10d7ff] pci 0000:00:0b.0: reg 14 32bit mmio: [0xef100000-0xef103fff] pci 0000:00:0b.0: supports D2 pci 0000:00:0b.0: PME# supported from D2 D3hot pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: reg 10 io port: [0xa800-0xa87f] pci 0000:00:0c.0: supports D2 pci 0000:00:0c.1: reg 10 io port: [0xac00-0xac0f] pci 0000:00:0c.1: supports D1 pci 0000:00:0c.1: PME# supported from D1 D3hot pci 0000:00:0c.1: PME# disabled pci 0000:00:0e.0: reg 20 io port: [0xb000-0xb01f] pci 0000:00:0e.0: supports D1 D2 pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:0e.0: PME# disabled pci 0000:00:0e.1: reg 20 io port: [0xb400-0xb41f] pci 0000:00:0e.1: supports D1 D2 pci 0000:00:0e.1: PME# supported from D0 D1 D2 D3hot pci 0000:00:0e.1: PME# disabled pci 0000:00:0e.2: reg 10 32bit mmio: [0xef109000-0xef1090ff] pci 0000:00:0e.2: supports D1 D2 pci 0000:00:0e.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:0e.2: PME# disabled pci 0000:00:0f.0: reg 10 io port: [0xb800-0xb8ff] pci 0000:00:0f.0: reg 14 64bit mmio: [0xef10a000-0xef10a3ff] pci 0000:00:0f.0: reg 1c 64bit mmio: [0xef104000-0xef105fff] pci 0000:00:0f.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:0f.0: supports D1 D2 pci 0000:00:0f.1: reg 10 io port: [0xbc00-0xbcff] pci 0000:00:0f.1: reg 14 64bit mmio: [0xef10c000-0xef10c3ff] pci 0000:00:0f.1: reg 1c 64bit mmio: [0xef106000-0xef107fff] pci 0000:00:0f.1: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:0f.1: supports D1 D2 pci 0000:00:11.1: reg 20 io port: [0xc000-0xc00f] pci 0000:00:11.3: reg 20 io port: [0xc800-0xc81f] pci 0000:00:11.4: reg 20 io port: [0xcc00-0xcc1f] pci 0000:01:00.0: reg 10 32bit mmio: [0xec000000-0xecffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe4000000-0xe7ffffff] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8000000-0xe807ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe4000000-0xebffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: mem resource (0xce800-0xcffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x7fff0000-0x7fffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff has been reserved system 00:00: iomem range 0x100000-0x7ffeffff could not be reserved system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved system 00:02: ioport range 0xb78-0xb7b has been reserved system 00:02: ioport range 0xf78-0xf7b has been reserved system 00:02: ioport range 0xa78-0xa7b has been reserved system 00:02: ioport range 0xe78-0xe7b has been reserved system 00:02: ioport range 0xbbc-0xbbf has been reserved system 00:02: ioport range 0xfbc-0xfbf has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x294-0x297 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff pci 0000:00:01.0: PREFETCH window: 0x000000e4000000-0x000000ebffffff pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] pci_bus 0000:01: resource 2 pref mem [0xe4000000-0xebffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 highmem bounce pool size: 64 pages NTFS driver 2.1.29 [Flags: R/W]. msgmni has been set to 1733 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:00:08.0: Firmware left e100 interrupts enabled; disabling pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0xe4000000, mapped to 0xf8080000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:b7a0 vesafb: pmi: set display start = c00cb7e5, set palette = c00cb86a vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (51 C) Real Time Clock Driver v1.12b Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver via82cxxx 0000:00:11.1: VIA vt8233 (rev 00) IDE UDMA100 via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 VIA_IDE 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 VIA_IDE 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 10 via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc000-0xc007 ide1: BM-DMA at 0xc008-0xc00f Probing IDE interface ide0... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 hda: ST340016A, ATA DISK drive hdb: SAMSUNG HD400LD, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/100 mode selected Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63 hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hdb: max request size: 512KiB hdb: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63 hdb: cache flushes supported hdb: hdb1 ide-cd driver 5.00 ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 sym53c8xx 0000:00:0f.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sym0: <1010-33> rev 0x1 at pci 0000:00:0f.0 irq 19 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 sym53c8xx 0000:00:0f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sym1: <1010-33> rev 0x1 at pci 0000:00:0f.1 irq 19 sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: SCSI BUS has been reset. sym1: SCSI BUS mode change from SE to SE. scsi1 : sym-2.2.3 sym1: SCSI BUS has been reset. Driver 'sd' needs updating - please use bus_type methods e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e100 0000:00:08.0: PME# disabled e100: eth0: e100_probe: addr 0xef108000, irq 16, MAC addr 00:10:dc:5a:ab:49 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:00:0a.0: no PCI Express capability eth1: RTL8110s at 0xf8028000, 00:11:95:5d:05:3a, XID 04000000 IRQ 18 ohci1394 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[ef10d000-ef10d7ff] Max Packet=[2048] IR/IT contexts=[4/8] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:0e.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:0e.2: EHCI Host Controller ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0e.2: irq 16, io mem 0xef109000 ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:0e.0: UHCI Host Controller uhci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:0e.0: irq 18, io base 0x0000b000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:0e.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:0e.1: UHCI Host Controller uhci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:0e.1: irq 19, io base 0x0000b400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:11.3: UHCI Host Controller uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:11.3: irq 11, io base 0x0000c800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:11.4: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:11.4: UHCI Host Controller uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:11.4: irq 11, io base 0x0000cc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.20. FM801 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 usb 1-4: new high speed USB device using ehci_hcd and address 2 ALSA device list: #0: ForteMedia FM801-AU at 0xa800, irq 16 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode usb 1-4: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. ieee1394: Host added: ID:BUS[0-00:1023] GUID[37200856000015c2] kjournald starting. Commit interval 5 seconds EXT3-fs: hda6: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 358015 EXT3-fs: hda6: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 3:6. Freeing unused kernel memory: 284k freed Linux agpgart interface v0.103 agpgart: Detected VIA Pro266T chipset agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 usb-storage: device scan complete sd 2:0:0:0: [sda] Attached SCSI removable disk EXT3 FS on hda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. e100 0000:00:08.0: firmware: using built-in firmware e100/d101m_ucode.bin r8169: eth1: link up e100: eth0 NIC Link is Up 100 Mbps Full Duplex [-- Attachment #4: lsmod --] [-- Type: text/plain, Size: 111 bytes --] Module Size Used by via_agp 7460 1 agpgart 26076 1 via_agp [-- Attachment #5: syslog --] [-- Type: text/plain, Size: 7741 bytes --] Aug 7 20:20:15 arnold kernel: ACPI: RSDP 000f75e0 00014 (v00 VIA694) Aug 7 20:20:15 arnold kernel: ACPI: RSDT 7fff3000 0002C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) Aug 7 20:20:15 arnold kernel: ACPI: FACP 7fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) Aug 7 20:20:15 arnold kernel: ACPI: DSDT 7fff30c0 02B9C (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) Aug 7 20:20:15 arnold kernel: ACPI: FACS 7fff0000 00040 Aug 7 20:20:15 arnold kernel: ACPI: APIC 7fff5c80 0005C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) Aug 7 20:20:15 arnold kernel: Zone PFN ranges: Aug 7 20:20:15 arnold kernel: DMA 0x00000000 -> 0x00001000 Aug 7 20:20:15 arnold kernel: Normal 0x00001000 -> 0x000377fe Aug 7 20:20:15 arnold kernel: HighMem 0x000377fe -> 0x0007fff0 Aug 7 20:20:15 arnold kernel: Movable zone start PFN for each node Aug 7 20:20:15 arnold kernel: early_node_map[2] active PFN ranges Aug 7 20:20:15 arnold kernel: 0: 0x00000000 -> 0x0000009f Aug 7 20:20:15 arnold kernel: 0: 0x00000100 -> 0x0007fff0 Aug 7 20:20:15 arnold kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520079 Aug 7 20:20:15 arnold kernel: PID hash table entries: 4096 (order: 12, 16384 bytes) Aug 7 20:20:15 arnold kernel: Fast TSC calibration using PIT Aug 7 20:20:15 arnold kernel: Detected 1469.897 MHz processor. Aug 7 20:20:15 arnold kernel: Console: colour dummy device 80x25 Aug 7 20:20:15 arnold kernel: Mount-cache hash table entries: 512 Aug 7 20:20:15 arnold kernel: mtrr: your CPUs had inconsistent fixed MTRR settings Aug 7 20:20:15 arnold kernel: mtrr: your CPUs had inconsistent variable MTRR settings Aug 7 20:20:15 arnold kernel: bio: create slab <bio-0> at 0 Aug 7 20:20:15 arnold kernel: pnp 00:00: mem resource (0xce800-0xcffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:20:15 arnold kernel: pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:20:15 arnold kernel: pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:20:15 arnold kernel: pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:20:15 arnold kernel: pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:20:15 arnold kernel: highmem bounce pool size: 64 pages Aug 7 20:20:15 arnold kernel: pci 0000:00:08.0: Firmware left e100 interrupts enabled; disabling Aug 7 20:20:15 arnold kernel: Console: switching to colour frame buffer device 128x48 Aug 7 20:20:15 arnold kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 Aug 7 20:20:15 arnold kernel: sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking Aug 7 20:20:15 arnold kernel: sym0: open drain IRQ line driver, using on-chip SRAM Aug 7 20:20:15 arnold kernel: sym0: using LOAD/STORE-based firmware. Aug 7 20:20:15 arnold kernel: sym0: handling phase mismatch from SCRIPTS. Aug 7 20:20:15 arnold kernel: sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking Aug 7 20:20:15 arnold kernel: sym1: open drain IRQ line driver, using on-chip SRAM Aug 7 20:20:15 arnold kernel: sym1: using LOAD/STORE-based firmware. Aug 7 20:20:15 arnold kernel: sym1: handling phase mismatch from SCRIPTS. Aug 7 20:20:15 arnold kernel: sym1: SCSI BUS mode change from SE to SE. Aug 7 20:20:15 arnold kernel: Driver 'sd' needs updating - please use bus_type methods Aug 7 20:20:15 arnold kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Aug 7 20:20:15 arnold kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Aug 7 20:20:15 arnold kernel: VFS: Mounted root (ext3 filesystem) readonly on device 3:6. Aug 7 20:20:43 arnold kdm_greet[2387]: Cannot open default user face Aug 7 20:24:26 arnold kernel: ACPI: RSDP 000f75e0 00014 (v00 VIA694) Aug 7 20:24:26 arnold kernel: ACPI: RSDT 7fff3000 0002C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) Aug 7 20:24:26 arnold kernel: ACPI: FACP 7fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) Aug 7 20:24:26 arnold kernel: ACPI: DSDT 7fff30c0 02B9C (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) Aug 7 20:24:26 arnold kernel: ACPI: FACS 7fff0000 00040 Aug 7 20:24:26 arnold kernel: ACPI: APIC 7fff5c80 0005C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) Aug 7 20:24:26 arnold kernel: Zone PFN ranges: Aug 7 20:24:26 arnold kernel: DMA 0x00000000 -> 0x00001000 Aug 7 20:24:26 arnold kernel: Normal 0x00001000 -> 0x000377fe Aug 7 20:24:26 arnold kernel: HighMem 0x000377fe -> 0x0007fff0 Aug 7 20:24:26 arnold kernel: Movable zone start PFN for each node Aug 7 20:24:26 arnold kernel: early_node_map[2] active PFN ranges Aug 7 20:24:26 arnold kernel: 0: 0x00000000 -> 0x0000009f Aug 7 20:24:26 arnold kernel: 0: 0x00000100 -> 0x0007fff0 Aug 7 20:24:26 arnold kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520079 Aug 7 20:24:26 arnold kernel: PID hash table entries: 4096 (order: 12, 16384 bytes) Aug 7 20:24:26 arnold kernel: Fast TSC calibration using PIT Aug 7 20:24:26 arnold kernel: Detected 1469.897 MHz processor. Aug 7 20:24:26 arnold kernel: Console: colour dummy device 80x25 Aug 7 20:24:26 arnold kernel: Mount-cache hash table entries: 512 Aug 7 20:24:26 arnold kernel: mtrr: your CPUs had inconsistent fixed MTRR settings Aug 7 20:24:26 arnold kernel: mtrr: your CPUs had inconsistent variable MTRR settings Aug 7 20:24:26 arnold kernel: bio: create slab <bio-0> at 0 Aug 7 20:24:26 arnold kernel: pnp 00:00: mem resource (0xce800-0xcffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:24:26 arnold kernel: pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:24:26 arnold kernel: pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:24:26 arnold kernel: pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:24:26 arnold kernel: pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling Aug 7 20:24:26 arnold kernel: highmem bounce pool size: 64 pages Aug 7 20:24:26 arnold kernel: pci 0000:00:08.0: Firmware left e100 interrupts enabled; disabling Aug 7 20:24:26 arnold kernel: Console: switching to colour frame buffer device 128x48 Aug 7 20:24:26 arnold kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 Aug 7 20:24:26 arnold kernel: sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking Aug 7 20:24:26 arnold kernel: sym0: open drain IRQ line driver, using on-chip SRAM Aug 7 20:24:26 arnold kernel: sym0: using LOAD/STORE-based firmware. Aug 7 20:24:26 arnold kernel: sym0: handling phase mismatch from SCRIPTS. Aug 7 20:24:26 arnold kernel: sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking Aug 7 20:24:26 arnold kernel: sym1: open drain IRQ line driver, using on-chip SRAM Aug 7 20:24:26 arnold kernel: sym1: using LOAD/STORE-based firmware. Aug 7 20:24:26 arnold kernel: sym1: handling phase mismatch from SCRIPTS. Aug 7 20:24:26 arnold kernel: sym1: SCSI BUS mode change from SE to SE. Aug 7 20:24:26 arnold kernel: Driver 'sd' needs updating - please use bus_type methods Aug 7 20:24:26 arnold kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Aug 7 20:24:26 arnold kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Aug 7 20:24:26 arnold kernel: VFS: Mounted root (ext3 filesystem) readonly on device 3:6. Aug 7 20:24:50 arnold kdm_greet[2360]: Cannot open default user face Aug 7 20:25:27 arnold python: hp-systray[2480]: warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting. [-- Attachment #6: lspci-vv --] [-- Type: text/plain, Size: 13363 bytes --] 00:00.0 Host bridge: VIA Technologies, Inc. VT8653 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 8 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: agpgart-via Kernel modules: via-agp 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: e4000000-ebffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:08.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) Subsystem: Intel Corporation 82559 Fast Ethernet LAN on Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at ef108000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at a000 [size=64] Region 2: Memory at ef000000 (32-bit, non-prefetchable) [size=1M] [virtual] Expansion ROM at 88000000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: e100 00:0a.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 10) Subsystem: D-Link System Inc DGE-528T Gigabit Ethernet Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at a400 [size=256] Region 1: Memory at ef10b000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 88100000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: r8169 00:0b.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller (prog-if 10 [OHCI]) Subsystem: Texas Instruments Unknown device 8010 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ef10d000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at ef100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci1394 00:0c.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A [FM801] (rev b1) Subsystem: Fortemedia, Inc FM801 PCI Audio Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 10000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at a800 [size=128] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: FM801 00:0c.1 Gameport controller: Fortemedia, Inc Xwave QS3000A [FM801 game port] (rev b1) (prog-if 10 [Extended]) Subsystem: Fortemedia, Inc FM801 PCI Joystick Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 10000ns max) Region 0: I/O ports at ac00 [size=16] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0e.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 4: I/O ports at b000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:0e.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:0e.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 16 Region 0: Memory at ef109000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI Adapter (rev 01) Subsystem: Tekram Technology Co.,Ltd. Unknown device 1010 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at b800 [size=256] Region 1: Memory at ef10a000 (64-bit, non-prefetchable) [size=1K] Region 3: Memory at ef104000 (64-bit, non-prefetchable) [size=8K] [virtual] Expansion ROM at 88120000 [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sym53c8xx 00:0f.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI Adapter (rev 01) Subsystem: Tekram Technology Co.,Ltd. Unknown device 1010 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (4250ns min, 4500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at bc00 [size=256] Region 1: Memory at ef10c000 (64-bit, non-prefetchable) [size=1K] Region 3: Memory at ef106000 (64-bit, non-prefetchable) [size=8K] [virtual] Expansion ROM at 88130000 [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sym53c8xx 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge Subsystem: VIA Technologies, Inc. Unknown device 0000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 10 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at c000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: VIA_IDE 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) (prog-if 00 [UHCI]) Subsystem: First International Computer, Inc. VA-502 Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at c800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) (prog-if 00 [UHCI]) Subsystem: First International Computer, Inc. VA-502 Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at cc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti 200] (rev a3) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Unknown device 8838 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e4000000 (32-bit, prefetchable) [size=64M] Region 2: Memory at e8000000 (32-bit, prefetchable) [size=512K] [virtual] Expansion ROM at e8080000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Kernel modules: nvidia [-- Attachment #7: .config --] [-- Type: text/plain, Size: 44039 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30.4 # Wed Aug 5 00:01:18 2009 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_X86_32_LAZY_GS=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # # CONFIG_CLASSIC_RCU is not set # CONFIG_TREE_RCU is not set CONFIG_PREEMPT_RCU=y # CONFIG_RCU_TRACE is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_API_DEBUG=y # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_FREEZER=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_MPPARSE=y # CONFIG_X86_BIGSMP is not set # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y # CONFIG_X86_DS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_SCHED_MC is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_X86_CPU_DEBUG is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_HIGHPTE is not set # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 # CONFIG_X86_PAT is not set # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set CONFIG_PCI_GODIRECT=y # CONFIG_PCI_GOOLPC is not set # CONFIG_PCI_GOANY is not set CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_HT_IRQ is not set # CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_OLPC is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set CONFIG_NF_CONNTRACK=y # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set # CONFIG_NF_CT_PROTO_DCCP is not set # CONFIG_NF_CT_PROTO_SCTP is not set # CONFIG_NF_CT_PROTO_UDPLITE is not set # CONFIG_NF_CONNTRACK_AMANDA is not set CONFIG_NF_CONNTRACK_FTP=y # CONFIG_NF_CONNTRACK_H323 is not set # CONFIG_NF_CONNTRACK_IRC is not set # CONFIG_NF_CONNTRACK_NETBIOS_NS is not set # CONFIG_NF_CONNTRACK_PPTP is not set # CONFIG_NF_CONNTRACK_SANE is not set # CONFIG_NF_CONNTRACK_SIP is not set # CONFIG_NF_CONNTRACK_TFTP is not set # CONFIG_NF_CT_NETLINK is not set CONFIG_NETFILTER_XTABLES=y # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set # CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATE is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=y CONFIG_NF_CONNTRACK_IPV4=y # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y # CONFIG_IP_NF_TARGET_ULOG is not set CONFIG_NF_NAT=y CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y # CONFIG_IP_NF_TARGET_NETMAP is not set CONFIG_IP_NF_TARGET_REDIRECT=y # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_FTP=y # CONFIG_NF_NAT_IRC is not set # CONFIG_NF_NAT_TFTP is not set # CONFIG_NF_NAT_AMANDA is not set # CONFIG_NF_NAT_PPTP is not set # CONFIG_NF_NAT_H323 is not set # CONFIG_NF_NAT_SIP is not set # CONFIG_IP_NF_MANGLE is not set # CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y # CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set # CONFIG_IDE_PROC_FS is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_CS5535 is not set # CONFIG_BLK_DEV_CS5536 is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_FCOE_FNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=y CONFIG_IEEE1394_OHCI1394=y # # PCILynx controller requires I2C # # CONFIG_IEEE1394_SBP2 is not set # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_RAWIO is not set # CONFIG_IEEE1394_VIDEO1394 is not set # CONFIG_IEEE1394_DV1394 is not set # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_COMPAT_NET_DEV_OPS is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set # # Multimedia devices # # # Multimedia core support # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=m # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set CONFIG_AGP_VIA=m # CONFIG_AGP_EFFICEON is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=y CONFIG_SND_SEQUENCER=y CONFIG_SND_SEQ_DUMMY=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_HRTIMER is not set CONFIG_SND_RTCTIMER=y CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y CONFIG_SND_AC97_CODEC=y # CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set CONFIG_SND_FM801=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SIS7019 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_USB is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set # CONFIG_X86_PLATFORM_DEVICES is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_DMIID is not set # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set # CONFIG_MISC_FILESYSTEMS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y # CONFIG_FRAME_POINTER is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FTRACE_SYSCALLS=y CONFIG_TRACING_SUPPORT=y # # Tracers # # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_EVENT_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_POWER_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_MMIOTRACE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_STRICT_DEVMEM is not set # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set CONFIG_4KSTACKS=y CONFIG_DOUBLEFAULT=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_OPTIMIZE_INLINING is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_IMA is not set CONFIG_CRYPTO=y # # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CRC32C_INTEL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_586=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set CONFIG_CRYPTO_BLOWFISH=y # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_SALSA20_586=y # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_SERPENT=y # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_586=y # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y # CONFIG_VIRTUALIZATION is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: 2.6.30.1-4 kernels freezes dual pentium-3 system 2009-08-07 20:29 ` Martin Rogge @ 2009-08-10 14:38 ` John Stoffel 0 siblings, 0 replies; 12+ messages in thread From: John Stoffel @ 2009-08-10 14:38 UTC (permalink / raw) To: Martin Rogge; +Cc: linux-kernel >>>>> "Martin" == Martin Rogge <marogge@onlinehome.de> writes: Martin> On Monday 03 August 2009 18:25:27 Martin Rogge wrote: >> Osipov Stanislav wrote: >> > I have a dual Pentium-3 system. It based on Asus CUR-DLS mainboard >> > with 2 Pentium-3EB 1000MHz (133 MHz FSB) installed. >> > >> > [...] >> > >> > But under 2.6.30.x kernels box freezes without any alerts. TTL before >> > freezing is about 5-30 mins. >> > >> > [...] >> > >> > Thanks in advance, >> > >> > Osipov Stanislav >> > Linux System Administrator. >> >> I also observe system lockups after upgrading to 2.6.30.[34]. The mainboard >> is an MSI-9105 with dual P-3 1400Mhz. TTL is a number of hours (which is >> going to make bisecting hard). Since all lockups have occured with a >> tainted kernel (nvidia) I am currently running a test with an untainted >> kernel. Should a lockup re-occur I will post details. >> >> Martin Martin> OK, I have observed the lockup now on a vanilla 2.6.30.4 Martin> kernel, unpatched & untainted. So it is now official: 2.6.30 Martin> can lock up on dual-P3s.:-( I'm not surprised. I've been running 2.6.31-rc5 on my Dual PIII and it's locked up three times now. I expect it to lockup before I get home today too. I guess I really need to start the long term bisection parade and see where the changes between 2.6.29 and 2.6.30 really are which causes this problem. John ^ permalink raw reply [flat|nested] 12+ messages in thread
* 2.6.30.1-4 kernels freezes dual pentium-3 system @ 2009-08-03 8:44 Осипов Станислав 0 siblings, 0 replies; 12+ messages in thread From: Осипов Станислав @ 2009-08-03 8:44 UTC (permalink / raw) To: linux-kernel [-- Attachment #1: Type: text/plain, Size: 68915 bytes --] I have a dual Pentium-3 system. It based on Asus CUR-DLS mainboard with 2 Pentium-3EB 1000MHz (133 MHz FSB) installed. Also, i'm using hardware RAID controller 3ware Escalade 7506-4LP, installed in the PCI-X expansion slot. This RAID is only one disk system in the box (RAID-5 on 4 IDE HDD 120GB from Seagate). Box works works fine and very stable under 2.6.29.5 kernel, although it is angry of buggy MP table (see app. #2 below). But sometimes, this kernel correctly reboots the system at all, but this happens very rarely. In most cases, nobody detects the box was rebooted. And this is satisfactory for me. But under 2.6.30.x kernels box freezes without any alerts. TTL before freezing is about 5-30 mins. I don't know why that shit happens. I'm ready to send any debug informations about this custom trouble, but if the specialists will request it with instructions for me. Appendix #1: lspci ====================================================================== 00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 05) 00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 05) 00:02.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 00:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] 00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50) 00:0f.1 IDE interface: Broadcom OSB4 IDE Controller 01:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) 01:03.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev 01) 01:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI Adapter (rev 01) 01:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI Adapter (rev 01) ====================================================================== Appendix #2: dmesg from 2.6.29.5 kernel ====================================================================== Jul 1 19:40:34 frya kernel: [ 0.000000] Linux version 2.6.29-gentoo-r5 (root@frya) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #1 SMP Sun Jun 7 01:45:26 MSD 2009 Jul 1 19:40:34 frya kernel: [ 0.000000] KERNEL supported cpus: Jul 1 19:40:34 frya kernel: [ 0.000000] Intel GenuineIntel Jul 1 19:40:34 frya kernel: [ 0.000000] AMD AuthenticAMD Jul 1 19:40:34 frya kernel: [ 0.000000] NSC Geode by NSC Jul 1 19:40:34 frya kernel: [ 0.000000] Cyrix CyrixInstead Jul 1 19:40:34 frya kernel: [ 0.000000] Centaur CentaurHauls Jul 1 19:40:34 frya kernel: [ 0.000000] Transmeta GenuineTMx86 Jul 1 19:40:34 frya kernel: [ 0.000000] Transmeta TransmetaCPU Jul 1 19:40:34 frya kernel: [ 0.000000] UMC UMC UMC UMC Jul 1 19:40:34 frya kernel: [ 0.000000] PAT WC disabled due to known CPU erratum. Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffb000 (usable) Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data) Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] DMI 2.3 present. Jul 1 19:40:34 frya kernel: [ 0.000000] last_pfn = 0x1fffb max_arch_pfn = 0x1000000 Jul 1 19:40:34 frya kernel: [ 0.000000] Scanning 2 areas for low memory corruption Jul 1 19:40:34 frya kernel: [ 0.000000] modified physical RAM map: Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 0000000000010000 - 0000000000092400 (usable) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 0000000000100000 - 000000001fffb000 (usable) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 000000001fffb000 - 000000001ffff000 (ACPI data) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 000000001ffff000 - 0000000020000000 (ACPI NVS) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) Jul 1 19:40:34 frya kernel: [ 0.000000] ASUS CUR-DLS detected: force use of acpi=ht Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: RSDP 000F6200, 0014 (r0 ASUS ) Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: RSDT 1FFFB000, 0030 (r1 ASUS CUR-DLS 30303031 MSFT 31313031) Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: FACP 1FFFB100, 0074 (r1 ASUS CUR-DLS 30303031 MSFT 31313031) Jul 1 19:40:34 frya kernel: [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) Jul 1 19:40:34 frya kernel: [ 0.000000] FADT: X_PM1b_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: DSDT 1FFFB180, 32A0 (r1 ASUS CUR-DLS 1000 MSFT 100000B) Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: FACS 1FFFF000, 0040 Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: BOOT 1FFFB040, 0028 (r1 ASUS CUR-DLS 30303031 MSFT 31313031) Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: APIC 1FFFB080, 0068 (r1 ASUS CUR-DLS 30303031 MSFT 31313031) Jul 1 19:40:34 frya kernel: [ 0.000000] 511MB LOWMEM available. Jul 1 19:40:34 frya kernel: [ 0.000000] mapped low ram: 0 - 1fffb000 Jul 1 19:40:34 frya kernel: [ 0.000000] low ram: 00000000 - 1fffb000 Jul 1 19:40:34 frya kernel: [ 0.000000] bootmap 00012000 - 00016000 Jul 1 19:40:34 frya kernel: [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 001fffb000] Jul 1 19:40:34 frya kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Jul 1 19:40:34 frya kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Jul 1 19:40:34 frya kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Jul 1 19:40:34 frya kernel: [ 0.000000] #3 [0000100000 - 0000838334] TEXT DATA BSS ==> [0000100000 - 0000838334] Jul 1 19:40:34 frya kernel: [ 0.000000] #4 [0000839000 - 0000842000] INIT_PG_TABLE ==> [0000839000 - 0000842000] Jul 1 19:40:34 frya kernel: [ 0.000000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] Jul 1 19:40:34 frya kernel: [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] Jul 1 19:40:34 frya kernel: [ 0.000000] #7 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000] Jul 1 19:40:34 frya kernel: [ 0.000000] found SMP MP-table at [c00f5270] 000f5270 Jul 1 19:40:34 frya kernel: [ 0.000000] Zone PFN ranges: Jul 1 19:40:34 frya kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Jul 1 19:40:34 frya kernel: [ 0.000000] Normal 0x00001000 -> 0x0001fffb Jul 1 19:40:34 frya kernel: [ 0.000000] Movable zone start PFN for each node Jul 1 19:40:34 frya kernel: [ 0.000000] early_node_map[4] active PFN ranges Jul 1 19:40:34 frya kernel: [ 0.000000] 0: 0x00000000 -> 0x00000002 Jul 1 19:40:34 frya kernel: [ 0.000000] 0: 0x00000006 -> 0x00000007 Jul 1 19:40:34 frya kernel: [ 0.000000] 0: 0x00000010 -> 0x00000092 Jul 1 19:40:34 frya kernel: [ 0.000000] 0: 0x00000100 -> 0x0001fffb Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled) Jul 1 19:40:34 frya kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Jul 1 19:40:34 frya kernel: [ 0.000000] Using ACPI for processor (LAPIC) configuration information Jul 1 19:40:34 frya kernel: [ 0.000000] Intel MultiProcessor Specification v1.4 Jul 1 19:40:34 frya kernel: [ 0.000000] Virtual Wire compatibility mode. Jul 1 19:40:34 frya kernel: [ 0.000000] MPTABLE: OEM ID: OEM00000 Jul 1 19:40:34 frya kernel: [ 0.000000] MPTABLE: Product ID: PROD00000000 Jul 1 19:40:34 frya kernel: [ 0.000000] MPTABLE: APIC at: 0xFEE00000 Jul 1 19:40:34 frya kernel: [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. Jul 1 19:40:34 frya kernel: [ 0.000000] I/O APIC #3 Version 17 at 0xFEC01000. Jul 1 19:40:34 frya kernel: [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs Jul 1 19:40:34 frya kernel: [ 0.000000] Processors: 2 Jul 1 19:40:34 frya kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Jul 1 19:40:34 frya kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Jul 1 19:40:34 frya kernel: [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 Jul 1 19:40:34 frya kernel: [ 0.000000] PERCPU: Allocating 24576 bytes of per cpu data Jul 1 19:40:34 frya kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 Jul 1 19:40:34 frya kernel: [ 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.29r5-0 ro root=803 Jul 1 19:40:34 frya kernel: [ 0.000000] Enabling fast FPU save and restore... done. Jul 1 19:40:34 frya kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Jul 1 19:40:34 frya kernel: [ 0.000000] Initializing CPU#0 Jul 1 19:40:34 frya kernel: [ 0.000000] Experimental hierarchical RCU implementation. Jul 1 19:40:34 frya kernel: [ 0.000000] RCU-based detection of stalled CPUs is enabled. Jul 1 19:40:34 frya kernel: [ 0.000000] Experimental hierarchical RCU init done. Jul 1 19:40:34 frya kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) Jul 1 19:40:34 frya kernel: [ 0.000000] Fast TSC calibration using PIT Jul 1 19:40:34 frya kernel: [ 0.000000] Detected 999.863 MHz processor. Jul 1 19:40:34 frya kernel: [ 0.004000] Console: colour VGA+ 80x25 Jul 1 19:40:34 frya kernel: [ 0.004000] console [tty0] enabled Jul 1 19:40:34 frya kernel: [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 1 19:40:34 frya kernel: [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 1 19:40:34 frya kernel: [ 0.004000] Memory: 511480k/524268k available (4659k kernel code, 12064k reserved, 1828k data, 420k init, 0k highmem) Jul 1 19:40:34 frya kernel: [ 0.004000] virtual kernel memory layout: Jul 1 19:40:34 frya kernel: [ 0.004000] fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB) Jul 1 19:40:34 frya kernel: [ 0.004000] vmalloc : 0xe07fb000 - 0xfff9d000 ( 503 MB) Jul 1 19:40:34 frya kernel: [ 0.004000] lowmem : 0xc0000000 - 0xdfffb000 ( 511 MB) Jul 1 19:40:34 frya kernel: [ 0.004000] .init : 0xc075d000 - 0xc07c6000 ( 420 kB) Jul 1 19:40:34 frya kernel: [ 0.004000] .data : 0xc058ce68 - 0xc0755fe8 (1828 kB) Jul 1 19:40:34 frya kernel: [ 0.004000] .text : 0xc0100000 - 0xc058ce68 (4659 kB) Jul 1 19:40:34 frya kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 1 19:40:34 frya kernel: [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jul 1 19:40:34 frya kernel: [ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.72 BogoMIPS (lpj=3999452) Jul 1 19:40:34 frya kernel: [ 0.004289] Security Framework initialized Jul 1 19:40:34 frya kernel: [ 0.004444] Mount-cache hash table entries: 512 Jul 1 19:40:34 frya kernel: [ 0.004852] CPU: L1 I cache: 16K, L1 D cache: 16K Jul 1 19:40:34 frya kernel: [ 0.004994] CPU: L2 cache: 256K Jul 1 19:40:34 frya kernel: [ 0.005104] Intel machine check architecture supported. Jul 1 19:40:34 frya kernel: [ 0.005224] Intel machine check reporting enabled on CPU#0. Jul 1 19:40:34 frya kernel: [ 0.005362] Checking 'hlt' instruction... OK. Jul 1 19:40:34 frya kernel: [ 0.020876] Freeing SMP alternatives: 18k freed Jul 1 19:40:34 frya kernel: [ 0.021241] ExtINT not setup in hardware but reported by MP table Jul 1 19:40:34 frya kernel: [ 0.022144] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 Jul 1 19:40:34 frya kernel: [ 0.024001] ...trying to set up timer (IRQ0) through the 8259A ... Jul 1 19:40:34 frya kernel: [ 0.024001] ..... (found apic 0 pin 0) ... Jul 1 19:40:34 frya kernel: [ 0.065981] ....... works. Jul 1 19:40:34 frya kernel: [ 0.066086] CPU0: Intel Pentium III (Coppermine) stepping 06 Jul 1 19:40:34 frya kernel: [ 0.068001] Booting processor 1 APIC 0x0 ip 0x6000 Jul 1 19:40:34 frya kernel: [ 0.004000] Initializing CPU#1 Jul 1 19:40:34 frya kernel: [ 0.004000] Calibrating delay using timer specific routine.. 2000.21 BogoMIPS (lpj=4000422) Jul 1 19:40:34 frya kernel: [ 0.004000] CPU: L1 I cache: 16K, L1 D cache: 16K Jul 1 19:40:34 frya kernel: [ 0.004000] CPU: L2 cache: 256K Jul 1 19:40:34 frya kernel: [ 0.004000] Intel machine check architecture supported. Jul 1 19:40:34 frya kernel: [ 0.004000] Intel machine check reporting enabled on CPU#1. Jul 1 19:40:34 frya kernel: [ 0.152278] CPU1: Intel Pentium III (Coppermine) stepping 06 Jul 1 19:40:34 frya kernel: [ 0.153219] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Jul 1 19:40:34 frya kernel: [ 0.156081] Brought up 2 CPUs Jul 1 19:40:34 frya kernel: [ 0.156196] Total of 2 processors activated (3999.93 BogoMIPS). Jul 1 19:40:34 frya kernel: [ 0.156611] net_namespace: 512 bytes Jul 1 19:40:34 frya kernel: [ 0.156844] NET: Registered protocol family 16 Jul 1 19:40:34 frya kernel: [ 0.161113] PCI: PCI BIOS revision 2.10 entry at 0xf0a80, last bus=1 Jul 1 19:40:34 frya kernel: [ 0.161238] PCI: Using configuration type 1 for base access Jul 1 19:40:34 frya kernel: [ 0.176349] bio: create slab <bio-0> at 0 Jul 1 19:40:34 frya kernel: [ 0.176447] ACPI: Interpreter disabled. Jul 1 19:40:34 frya kernel: [ 0.176447] SCSI subsystem initialized Jul 1 19:40:34 frya kernel: [ 0.180227] usbcore: registered new interface driver usbfs Jul 1 19:40:34 frya kernel: [ 0.180227] usbcore: registered new interface driver hub Jul 1 19:40:34 frya kernel: [ 0.180259] usbcore: registered new device driver usb Jul 1 19:40:34 frya kernel: [ 0.180259] PCI: Probing PCI hardware Jul 1 19:40:34 frya kernel: [ 0.180259] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, Jul 1 19:40:34 frya kernel: [ 0.180259] * this clock source is slow. If you are sure your timer does not have Jul 1 19:40:34 frya kernel: [ 0.180259] * this bug, please use "acpi_pm_good" to disable the workaround Jul 1 19:40:34 frya kernel: [ 0.184101] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, Jul 1 19:40:34 frya kernel: [ 0.184105] * this clock source is slow. If you are sure your timer does not have Jul 1 19:40:34 frya kernel: [ 0.184108] * this bug, please use "acpi_pm_good" to disable the workaround Jul 1 19:40:34 frya kernel: [ 0.184712] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot Jul 1 19:40:34 frya kernel: [ 0.184835] pci 0000:00:02.0: PME# disabled Jul 1 19:40:34 frya kernel: [ 0.185026] pci 0000:00:04.0: PME# supported from D1 D2 D3hot Jul 1 19:40:34 frya kernel: [ 0.185149] pci 0000:00:04.0: PME# disabled Jul 1 19:40:34 frya kernel: [ 0.185811] PCI: Discovered peer bus 01 Jul 1 19:40:34 frya kernel: [ 0.185811] pci 0000:01:02.0: PME# supported from D3hot D3cold Jul 1 19:40:34 frya kernel: [ 0.185811] pci 0000:01:02.0: PME# disabled Jul 1 19:40:34 frya kernel: [ 0.188110] pci 0000:00:0f.0: ServerWorks IRQ router [1166:0200] Jul 1 19:40:34 frya kernel: [ 0.188260] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 20 Jul 1 19:40:34 frya kernel: [ 0.188387] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 17 Jul 1 19:40:34 frya kernel: [ 0.188520] pci 0000:01:02.0: PCI->APIC IRQ transform: INT A -> IRQ 21 Jul 1 19:40:34 frya kernel: [ 0.188646] pci 0000:01:03.0: PCI->APIC IRQ transform: INT A -> IRQ 22 Jul 1 19:40:34 frya kernel: [ 0.188772] pci 0000:01:05.0: PCI->APIC IRQ transform: INT A -> IRQ 24 Jul 1 19:40:34 frya kernel: [ 0.188899] pci 0000:01:05.1: PCI->APIC IRQ transform: INT B -> IRQ 25 Jul 1 19:40:34 frya kernel: [ 0.200170] pnp: PnP ACPI: disabled Jul 1 19:40:34 frya kernel: [ 0.236329] NET: Registered protocol family 2 Jul 1 19:40:34 frya kernel: [ 0.276178] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) Jul 1 19:40:34 frya kernel: [ 0.276933] TCP established hash table entries: 16384 (order: 5, 131072 bytes) Jul 1 19:40:34 frya kernel: [ 0.277396] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) Jul 1 19:40:34 frya kernel: [ 0.277941] TCP: Hash tables configured (established 16384 bind 16384) Jul 1 19:40:34 frya kernel: [ 0.278074] TCP reno registered Jul 1 19:40:34 frya kernel: [ 0.288320] NET: Registered protocol family 1 Jul 1 19:40:34 frya kernel: [ 0.288917] Simple Boot Flag at 0x3a set to 0x80 Jul 1 19:40:34 frya kernel: [ 0.289411] platform rtc_cmos: registered platform RTC device (no PNP device found) Jul 1 19:40:34 frya kernel: [ 0.291001] scx200: NatSemi SCx200 Driver Jul 1 19:40:34 frya kernel: [ 0.291579] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba Jul 1 19:40:34 frya kernel: [ 0.291789] Scanning for low memory corruption every 60 seconds Jul 1 19:40:34 frya kernel: [ 0.293497] HugeTLB registered 2 MB page size, pre-allocated 0 pages Jul 1 19:40:34 frya kernel: [ 0.301346] VFS: Disk quotas dquot_6.5.2 Jul 1 19:40:34 frya kernel: [ 0.301826] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 1 19:40:34 frya kernel: [ 0.304414] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jul 1 19:40:34 frya kernel: [ 0.306379] NTFS driver 2.1.29 [Flags: R/W]. Jul 1 19:40:34 frya kernel: [ 0.307214] fuse init (API version 7.11) Jul 1 19:40:34 frya kernel: [ 0.308004] msgmni has been set to 999 Jul 1 19:40:34 frya kernel: [ 0.308376] alg: No test for cipher_null (cipher_null-generic) Jul 1 19:40:34 frya kernel: [ 0.308682] alg: No test for digest_null (digest_null-generic) Jul 1 19:40:34 frya kernel: [ 0.308884] alg: No test for compress_null (compress_null-generic) Jul 1 19:40:34 frya kernel: [ 0.311862] alg: No test for fcrypt (fcrypt-generic) Jul 1 19:40:34 frya kernel: [ 0.317396] alg: No test for stdrng (krng) Jul 1 19:40:34 frya kernel: [ 0.317613] alg: No test for stdrng (ansi_cprng) Jul 1 19:40:34 frya kernel: [ 0.317781] io scheduler noop registered Jul 1 19:40:34 frya kernel: [ 0.317891] io scheduler anticipatory registered (default) Jul 1 19:40:34 frya kernel: [ 0.318010] io scheduler deadline registered Jul 1 19:40:34 frya kernel: [ 0.318239] io scheduler cfq registered Jul 1 19:40:34 frya kernel: [ 0.321024] pci 0000:00:02.0: Firmware left e100 interrupts enabled; disabling Jul 1 19:40:34 frya kernel: [ 0.450588] Non-volatile memory driver v1.3 Jul 1 19:40:34 frya kernel: [ 0.450815] Linux agpgart interface v0.103 Jul 1 19:40:34 frya kernel: [ 0.451097] agpgart-serverworks 0000:00:00.0: agp_backend_initialize() failed Jul 1 19:40:34 frya kernel: [ 0.451230] agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 Jul 1 19:40:34 frya kernel: [ 0.451498] agpgart-serverworks 0000:00:00.1: agp_backend_initialize() failed Jul 1 19:40:34 frya kernel: [ 0.451628] agpgart-serverworks: probe of 0000:00:00.1 failed with error -22 Jul 1 19:40:34 frya kernel: [ 0.451965] ipmi message handler version 39.2 Jul 1 19:40:34 frya kernel: [ 0.452097] ipmi device interface Jul 1 19:40:34 frya kernel: [ 0.452422] IPMI System Interface driver. Jul 1 19:40:34 frya kernel: [ 0.481714] ipmi_si: Unable to find any System Interface(s) Jul 1 19:40:34 frya kernel: [ 0.481842] IPMI Watchdog: driver initialized Jul 1 19:40:34 frya kernel: [ 0.481956] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. Jul 1 19:40:34 frya kernel: [ 0.482178] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Jul 1 19:40:34 frya kernel: [ 0.482375] Hangcheck: Using get_cycles(). Jul 1 19:40:34 frya kernel: [ 0.483722] uvesafb: probe of uvesafb.0 failed with error -22 Jul 1 19:40:34 frya kernel: [ 0.483915] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Jul 1 19:40:34 frya kernel: [ 0.484301] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jul 1 19:40:34 frya kernel: [ 0.485045] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jul 1 19:40:34 frya kernel: [ 0.490114] brd: module loaded Jul 1 19:40:34 frya kernel: [ 0.492565] loop: module loaded Jul 1 19:40:34 frya kernel: [ 0.492784] 3c59x: Donald Becker and others. Jul 1 19:40:34 frya kernel: [ 0.492909] 0000:00:04.0: 3Com PCI 3c905B Cyclone 100baseTx at e0816000. Jul 1 19:40:34 frya kernel: [ 0.514196] eth0 (3c59x): not using net_device_ops yet Jul 1 19:40:34 frya kernel: [ 0.515139] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI Jul 1 19:40:34 frya kernel: [ 0.515264] e100: Copyright(c) 1999-2006 Intel Corporation Jul 1 19:40:34 frya kernel: [ 0.538257] e100 0000:00:02.0: PME# disabled Jul 1 19:40:34 frya kernel: [ 0.539039] e100: eth1: e100_probe: addr 0xfe000000, irq 20, MAC addr 00:e0:18:29:b7:b5 Jul 1 19:40:34 frya kernel: [ 0.539379] tg3.c:v3.97 (December 10, 2008) Jul 1 19:40:34 frya kernel: [ 0.545556] tg3 0000:01:02.0: PME# disabled Jul 1 19:40:34 frya kernel: [ 1.897196] eth2: Tigon3 [partno(3C996B-T) rev 0105] (PCI:33MHz:64-bit) MAC address 00:0a:5e:1d:43:be Jul 1 19:40:34 frya kernel: [ 1.897406] eth2: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1]) Jul 1 19:40:34 frya kernel: [ 1.897598] eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] Jul 1 19:40:34 frya kernel: [ 1.897721] eth2: dma_rwctrl[76ff000f] dma_mask[64-bit] Jul 1 19:40:34 frya kernel: [ 1.899322] Fixed MDIO Bus: probed Jul 1 19:40:34 frya kernel: [ 1.899449] PPP generic driver version 2.4.2 Jul 1 19:40:34 frya kernel: [ 1.900073] PPP Deflate Compression module registered Jul 1 19:40:34 frya kernel: [ 1.900195] PPP BSD Compression module registered Jul 1 19:40:34 frya kernel: [ 1.902648] tun: Universal TUN/TAP device driver, 1.6 Jul 1 19:40:34 frya kernel: [ 1.902771] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Jul 1 19:40:34 frya kernel: [ 1.904205] 3ware Storage Controller device driver for Linux v1.26.02.002. Jul 1 19:40:34 frya kernel: [ 3.360025] scsi0 : 3ware Storage Controller Jul 1 19:40:34 frya kernel: [ 3.360724] 3w-xxxx: scsi0: Found a 3ware Storage Controller at 0xb400, IRQ: 22. Jul 1 19:40:34 frya kernel: [ 3.361472] scsi 0:0:0:0: Direct-Access 3ware Logical Disk 0 1.2 PQ: 0 ANSI: 0 Jul 1 19:40:34 frya kernel: [ 3.361774] Driver 'sd' needs updating - please use bus_type methods Jul 1 19:40:34 frya kernel: [ 3.362876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 1 19:40:34 frya kernel: [ 3.363308] 116x: driver isp116x-hcd, 03 Nov 2005 Jul 1 19:40:34 frya kernel: [ 3.363538] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Jul 1 19:40:34 frya kernel: [ 3.363807] uhci_hcd: USB Universal Host Controller Interface driver Jul 1 19:40:34 frya kernel: [ 3.364244] sl811: driver sl811-hcd, 19 May 2005 Jul 1 19:40:34 frya kernel: [ 3.364501] r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008 Jul 1 19:40:34 frya kernel: [ 3.365041] usbcore: registered new interface driver usblp Jul 1 19:40:34 frya kernel: [ 3.365405] usbcore: registered new interface driver cdc_wdm Jul 1 19:40:34 frya kernel: [ 3.365538] Initializing USB Mass Storage driver... Jul 1 19:40:34 frya kernel: [ 3.365761] usbcore: registered new interface driver usb-storage Jul 1 19:40:34 frya kernel: [ 3.365887] USB Mass Storage support registered. Jul 1 19:40:34 frya kernel: [ 3.366172] usbcore: registered new interface driver libusual Jul 1 19:40:34 frya kernel: [ 3.366492] sd 0:0:0:0: [sda] 703318656 512-byte hardware sectors: (360 GB/335 GiB) Jul 1 19:40:34 frya kernel: [ 3.366715] PNP: No PS/2 controller found. Probing ports directly. Jul 1 19:40:34 frya kernel: [ 3.366750] sd 0:0:0:0: [sda] Write Protect is off Jul 1 19:40:34 frya kernel: [ 3.367099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, supports DPO and FUA Jul 1 19:40:34 frya kernel: [ 3.369201] sd 0:0:0:0: [sda] 703318656 512-byte hardware sectors: (360 GB/335 GiB) Jul 1 19:40:34 frya kernel: [ 3.369466] sd 0:0:0:0: [sda] Write Protect is off Jul 1 19:40:34 frya kernel: [ 3.369926] sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, supports DPO and FUA Jul 1 19:40:34 frya kernel: [ 3.370129] sda: sda1 sda2 sda3 sda4 < sda5 > Jul 1 19:40:34 frya kernel: [ 3.386765] sd 0:0:0:0: [sda] Attached SCSI disk Jul 1 19:40:34 frya kernel: [ 3.387409] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 1 19:40:34 frya kernel: [ 3.620388] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 1 19:40:34 frya kernel: [ 3.621192] mice: PS/2 mouse device common for all mice Jul 1 19:40:34 frya kernel: [ 3.621836] I2O subsystem v1.325 Jul 1 19:40:34 frya kernel: [ 3.621952] i2o: max drivers = 8 Jul 1 19:40:34 frya kernel: [ 3.622531] I2O Configuration OSM v1.323 Jul 1 19:40:34 frya kernel: [ 3.622743] I2O Bus Adapter OSM v1.317 Jul 1 19:40:34 frya kernel: [ 3.622954] I2O Block Device OSM v1.325 Jul 1 19:40:34 frya kernel: [ 3.623564] I2O SCSI Peripheral OSM v1.316 Jul 1 19:40:34 frya kernel: [ 3.623790] I2O ProcFS OSM v1.316 Jul 1 19:40:34 frya kernel: [ 3.624537] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 Jul 1 19:40:34 frya kernel: [ 3.624715] rtc0: alarms up to one day, 114 bytes nvram Jul 1 19:40:34 frya kernel: [ 3.627326] i2c /dev entries driver Jul 1 19:40:34 frya kernel: [ 3.627834] piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0xe800, revision 0 Jul 1 19:40:34 frya kernel: [ 3.808071] cpuidle: using governor ladder Jul 1 19:40:34 frya kernel: [ 3.808191] cpuidle: using governor menu Jul 1 19:40:34 frya kernel: [ 3.810853] usbcore: registered new interface driver usbhid Jul 1 19:40:34 frya kernel: [ 3.810986] usbhid: v2.6:USB HID core driver Jul 1 19:40:34 frya kernel: [ 3.811100] GACT probability on Jul 1 19:40:34 frya kernel: [ 3.811208] Mirror/redirect action on Jul 1 19:40:34 frya kernel: [ 3.812235] u32 classifier Jul 1 19:40:34 frya kernel: [ 3.812345] Performance counters on Jul 1 19:40:34 frya kernel: [ 3.812454] input device check on Jul 1 19:40:34 frya kernel: [ 3.812561] Actions configured Jul 1 19:40:34 frya kernel: [ 3.812676] Netfilter messages via NETLINK v0.30. Jul 1 19:40:34 frya kernel: [ 3.812856] nf_conntrack version 0.5.0 (8191 buckets, 32764 max) Jul 1 19:40:34 frya kernel: [ 3.813467] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jul 1 19:40:34 frya kernel: [ 3.813668] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or Jul 1 19:40:34 frya kernel: [ 3.813861] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jul 1 19:40:34 frya kernel: [ 3.814214] ctnetlink v0.93: registering with nfnetlink. Jul 1 19:40:34 frya kernel: [ 3.814433] xt_time: kernel timezone is -0000 Jul 1 19:40:34 frya kernel: [ 3.815742] IPv4 over IPv4 tunneling driver Jul 1 19:40:34 frya kernel: [ 3.816908] GRE over IPv4 tunneling driver Jul 1 19:40:34 frya kernel: [ 3.818537] ip_tables: (C) 2000-2006 Netfilter Core Team Jul 1 19:40:34 frya kernel: [ 3.818748] TCP cubic registered Jul 1 19:40:34 frya kernel: [ 3.818859] NET: Registered protocol family 17 Jul 1 19:40:34 frya kernel: [ 3.819013] Using IPI Shortcut mode Jul 1 19:40:34 frya kernel: [ 3.820261] drivers/rtc/hctosys.c: unable to open rtc device (y) Jul 1 19:40:34 frya kernel: [ 3.821636] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Jul 1 19:40:34 frya kernel: [ 3.821756] EDD information not available. Jul 1 19:40:34 frya kernel: [ 3.841260] ReiserFS: sda3: found reiserfs format "3.6" with standard journal Jul 1 19:40:34 frya kernel: [ 3.841407] ReiserFS: sda3: using ordered data mode Jul 1 19:40:34 frya kernel: [ 3.845738] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Jul 1 19:40:34 frya kernel: [ 3.850064] ReiserFS: sda3: checking transaction log (sda3) Jul 1 19:40:34 frya kernel: [ 4.101549] ReiserFS: sda3: Using r5 hash to sort names Jul 1 19:40:34 frya kernel: [ 4.101742] VFS: Mounted root (reiserfs filesystem) readonly on device 8:3. Jul 1 19:40:34 frya kernel: [ 4.102732] Freeing unused kernel memory: 420k freed Jul 1 19:40:34 frya kernel: [ 8.585398] udev: starting version 141 Jul 1 19:40:34 frya kernel: [ 11.871013] ReiserFS: sda5: found reiserfs format "3.6" with standard journal Jul 1 19:40:34 frya kernel: [ 11.871048] ReiserFS: sda5: using ordered data mode Jul 1 19:40:34 frya kernel: [ 11.871773] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Jul 1 19:40:34 frya kernel: [ 11.875749] ReiserFS: sda5: checking transaction log (sda5) Jul 1 19:40:34 frya kernel: [ 11.968095] ReiserFS: sda5: Using r5 hash to sort names Jul 1 19:40:34 frya kernel: [ 12.226030] Adding 136512k swap on /dev/sda1. Priority:-1 extents:1 across:136512k Jul 1 19:40:35 frya kernel: [ 16.313699] eth0: setting full-duplex. Jul 1 19:40:35 frya kernel: [ 16.314479] tg3 0000:01:02.0: PME# disabled Jul 1 19:40:38 frya kernel: [ 18.414870] tg3: eth2: Link is up at 100 Mbps, full duplex. Jul 1 19:40:38 frya kernel: [ 18.414880] tg3: eth2: Flow control is on for TX and on for RX. ====================================================================== Appendix #3: tw_cli status ====================================================================== Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-5 OK - - 64K 335.368 W - Port Status Unit Size Blocks Serial --------------------------------------------------------------- p0 OK u0 111.79 GB 234441648 3JT3MC21 p1 OK u0 111.79 GB 234441648 3JT1R02J p2 OK u0 111.79 GB 234441648 3JT02ZWS p3 OK u0 111.79 GB 234441648 5LS1A47C ====================================================================== Appendix #4: dmesg of 2.6.30.4 kernel ====================================================================== Aug 1 19:42:57 frya kernel: [ 0.000000] Linux version 2.6.30-gentoo-r4 (root@frya) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #1 SMP Sat Aug 1 16:55:18 MSD 2009 Aug 1 19:42:57 frya kernel: [ 0.000000] KERNEL supported cpus: Aug 1 19:42:57 frya kernel: [ 0.000000] Intel GenuineIntel Aug 1 19:42:57 frya kernel: [ 0.000000] AMD AuthenticAMD Aug 1 19:42:57 frya kernel: [ 0.000000] NSC Geode by NSC Aug 1 19:42:57 frya kernel: [ 0.000000] Cyrix CyrixInstead Aug 1 19:42:57 frya kernel: [ 0.000000] Centaur CentaurHauls Aug 1 19:42:57 frya kernel: [ 0.000000] Transmeta GenuineTMx86 Aug 1 19:42:57 frya kernel: [ 0.000000] Transmeta TransmetaCPU Aug 1 19:42:57 frya kernel: [ 0.000000] UMC UMC UMC UMC Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-provided physical RAM map: Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffb000 (usable) Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data) Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] DMI 2.3 present. Aug 1 19:42:57 frya kernel: [ 0.000000] last_pfn = 0x1fffb max_arch_pfn = 0x100000 Aug 1 19:42:57 frya kernel: [ 0.000000] Scanning 1 areas for low memory corruption Aug 1 19:42:57 frya kernel: [ 0.000000] modified physical RAM map: Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 0000000000100000 - 000000001fffb000 (usable) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 000000001fffb000 - 000000001ffff000 (ACPI data) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 000000001ffff000 - 0000000020000000 (ACPI NVS) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) Aug 1 19:42:57 frya kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000001fffb000 Aug 1 19:42:57 frya kernel: [ 0.000000] ASUS CUR-DLS detected: force use of acpi=ht Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: RSDP 000f6200 00014 (v00 ASUS ) Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: RSDT 1fffb000 00030 (v01 ASUS CUR-DLS 30303031 MSFT 31313031) Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: FACP 1fffb100 00074 (v01 ASUS CUR-DLS 30303031 MSFT 31313031) Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: DSDT 1fffb180 032A0 (v01 ASUS CUR-DLS 00001000 MSFT 0100000B) Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: FACS 1ffff000 00040 Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: BOOT 1fffb040 00028 (v01 ASUS CUR-DLS 30303031 MSFT 31313031) Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: APIC 1fffb080 00068 (v01 ASUS CUR-DLS 30303031 MSFT 31313031) Aug 1 19:42:57 frya kernel: [ 0.000000] 511MB LOWMEM available. Aug 1 19:42:57 frya kernel: [ 0.000000] mapped low ram: 0 - 1fffb000 Aug 1 19:42:57 frya kernel: [ 0.000000] low ram: 0 - 1fffb000 Aug 1 19:42:57 frya kernel: [ 0.000000] node 0 low ram: 00000000 - 1fffb000 Aug 1 19:42:57 frya kernel: [ 0.000000] node 0 bootmap 00008000 - 0000c000 Aug 1 19:42:57 frya kernel: [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 001fffb000] Aug 1 19:42:57 frya kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Aug 1 19:42:57 frya kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Aug 1 19:42:57 frya kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Aug 1 19:42:57 frya kernel: [ 0.000000] #3 [0000100000 - 00008c1fc4] TEXT DATA BSS ==> [0000100000 - 00008c1fc4] Aug 1 19:42:57 frya kernel: [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] Aug 1 19:42:57 frya kernel: [ 0.000000] #5 [00008c2000 - 00008c5150] BRK ==> [00008c2000 - 00008c5150] Aug 1 19:42:57 frya kernel: [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] Aug 1 19:42:57 frya kernel: [ 0.000000] #7 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] Aug 1 19:42:57 frya kernel: [ 0.000000] found SMP MP-table at [c00f5270] f5270 Aug 1 19:42:57 frya kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Aug 1 19:42:57 frya kernel: [ 0.000000] Normal 0x00001000 -> 0x0001fffb Aug 1 19:42:57 frya kernel: [ 0.000000] Movable zone start PFN for each node Aug 1 19:42:57 frya kernel: [ 0.000000] early_node_map[3] active PFN ranges Aug 1 19:42:57 frya kernel: [ 0.000000] 0: 0x00000000 -> 0x00000002 Aug 1 19:42:57 frya kernel: [ 0.000000] 0: 0x00000006 -> 0x0000009f Aug 1 19:42:57 frya kernel: [ 0.000000] 0: 0x00000100 -> 0x0001fffb Aug 1 19:42:57 frya kernel: [ 0.000000] Using APIC driver default Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled) Aug 1 19:42:57 frya kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Aug 1 19:42:57 frya kernel: [ 0.000000] Using ACPI for processor (LAPIC) configuration information Aug 1 19:42:57 frya kernel: [ 0.000000] Intel MultiProcessor Specification v1.4 Aug 1 19:42:57 frya kernel: [ 0.000000] Virtual Wire compatibility mode. Aug 1 19:42:57 frya kernel: [ 0.000000] MPTABLE: OEM ID: OEM00000 Aug 1 19:42:57 frya kernel: [ 0.000000] MPTABLE: Product ID: PROD00000000 Aug 1 19:42:57 frya kernel: [ 0.000000] MPTABLE: APIC at: 0xFEE00000 Aug 1 19:42:57 frya kernel: [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. Aug 1 19:42:57 frya kernel: [ 0.000000] I/O APIC #3 Version 17 at 0xFEC01000. Aug 1 19:42:57 frya kernel: [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs Aug 1 19:42:57 frya kernel: [ 0.000000] Processors: 2 Aug 1 19:42:57 frya kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Aug 1 19:42:57 frya kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Aug 1 19:42:57 frya kernel: [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 Aug 1 19:42:57 frya kernel: [ 0.000000] PERCPU: Embedded 9 pages at c1402000, static data 23196 bytes Aug 1 19:42:57 frya kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129942 Aug 1 19:42:57 frya kernel: [ 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.30r4-0 ro root=803 Aug 1 19:42:57 frya kernel: [ 0.000000] Enabling fast FPU save and restore... done. Aug 1 19:42:57 frya kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Aug 1 19:42:57 frya kernel: [ 0.000000] Initializing CPU#0 Aug 1 19:42:57 frya kernel: [ 0.000000] RCU-based detection of stalled CPUs is enabled. Aug 1 19:42:57 frya kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:512 Aug 1 19:42:57 frya kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) Aug 1 19:42:57 frya kernel: [ 0.000000] Fast TSC calibration using PIT Aug 1 19:42:57 frya kernel: [ 0.000000] Detected 999.863 MHz processor. Aug 1 19:42:57 frya kernel: [ 0.000999] Console: colour VGA+ 80x25 Aug 1 19:42:57 frya kernel: [ 0.000999] console [tty0] enabled Aug 1 19:42:57 frya kernel: [ 0.000999] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Aug 1 19:42:57 frya kernel: [ 0.000999] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Aug 1 19:42:57 frya kernel: [ 0.000999] Memory: 510916k/524268k available (4925k kernel code, 12808k reserved, 1927k data, 468k init, 0k highmem) Aug 1 19:42:57 frya kernel: [ 0.000999] virtual kernel memory layout: Aug 1 19:42:57 frya kernel: [ 0.000999] fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) Aug 1 19:42:57 frya kernel: [ 0.000999] vmalloc : 0xe07fb000 - 0xfff9b000 ( 503 MB) Aug 1 19:42:57 frya kernel: [ 0.000999] lowmem : 0xc0000000 - 0xdfffb000 ( 511 MB) Aug 1 19:42:57 frya kernel: [ 0.000999] .init : 0xc07b9000 - 0xc082e000 ( 468 kB) Aug 1 19:42:57 frya kernel: [ 0.000999] .data : 0xc05cf7fa - 0xc07b1700 (1927 kB) Aug 1 19:42:57 frya kernel: [ 0.000999] .text : 0xc0100000 - 0xc05cf7fa (4925 kB) Aug 1 19:42:57 frya kernel: [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. Aug 1 19:42:57 frya kernel: [ 0.000999] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Aug 1 19:42:57 frya kernel: [ 0.001015] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.72 BogoMIPS (lpj=999863) Aug 1 19:42:57 frya kernel: [ 0.001292] Security Framework initialized Aug 1 19:42:57 frya kernel: [ 0.001433] Mount-cache hash table entries: 512 Aug 1 19:42:57 frya kernel: [ 0.001872] CPU: L1 I cache: 16K, L1 D cache: 16K Aug 1 19:42:57 frya kernel: [ 0.002008] CPU: L2 cache: 256K Aug 1 19:42:57 frya kernel: [ 0.002120] Intel machine check architecture supported. Aug 1 19:42:57 frya kernel: [ 0.002238] Intel machine check reporting enabled on CPU#0. Aug 1 19:42:57 frya kernel: [ 0.002375] Checking 'hlt' instruction... OK. Aug 1 19:42:57 frya kernel: [ 0.006929] Freeing SMP alternatives: 18k freed Aug 1 19:42:57 frya kernel: [ 0.007276] ExtINT not setup in hardware but reported by MP table Aug 1 19:42:57 frya kernel: [ 0.007998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 Aug 1 19:42:57 frya kernel: [ 0.007998] ...trying to set up timer (IRQ0) through the 8259A ... Aug 1 19:42:57 frya kernel: [ 0.007998] ..... (found apic 0 pin 0) ... Aug 1 19:42:57 frya kernel: [ 0.018703] ....... works. Aug 1 19:42:57 frya kernel: [ 0.018809] CPU0: Intel Pentium III (Coppermine) stepping 06 Aug 1 19:42:57 frya kernel: [ 0.019996] Booting processor 1 APIC 0x0 ip 0x6000 Aug 1 19:42:57 frya kernel: [ 0.000999] Initializing CPU#1 Aug 1 19:42:57 frya kernel: [ 0.000999] Calibrating delay using timer specific routine.. 1999.73 BogoMIPS (lpj=999865) Aug 1 19:42:57 frya kernel: [ 0.000999] CPU: L1 I cache: 16K, L1 D cache: 16K Aug 1 19:42:57 frya kernel: [ 0.000999] CPU: L2 cache: 256K Aug 1 19:42:57 frya kernel: [ 0.000999] Intel machine check architecture supported. Aug 1 19:42:57 frya kernel: [ 0.000999] Intel machine check reporting enabled on CPU#1. Aug 1 19:42:57 frya kernel: [ 0.090284] CPU1: Intel Pentium III (Coppermine) stepping 06 Aug 1 19:42:57 frya kernel: [ 0.091172] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Aug 1 19:42:57 frya kernel: [ 0.092045] Brought up 2 CPUs Aug 1 19:42:57 frya kernel: [ 0.092158] Total of 2 processors activated (3999.45 BogoMIPS). Aug 1 19:42:57 frya kernel: [ 0.093186] net_namespace: 772 bytes Aug 1 19:42:57 frya kernel: [ 0.095057] NET: Registered protocol family 16 Aug 1 19:42:57 frya kernel: [ 0.096075] EISA bus registered Aug 1 19:42:57 frya kernel: [ 0.098549] PCI: PCI BIOS revision 2.10 entry at 0xf0a80, last bus=1 Aug 1 19:42:57 frya kernel: [ 0.098675] PCI: Using configuration type 1 for base access Aug 1 19:42:57 frya kernel: [ 0.116107] bio: create slab <bio-0> at 0 Aug 1 19:42:57 frya kernel: [ 0.117158] ACPI: Interpreter disabled. Aug 1 19:42:57 frya kernel: [ 0.118043] SCSI subsystem initialized Aug 1 19:42:57 frya kernel: [ 0.119048] usbcore: registered new interface driver usbfs Aug 1 19:42:57 frya kernel: [ 0.119208] usbcore: registered new interface driver hub Aug 1 19:42:57 frya kernel: [ 0.119247] usbcore: registered new device driver usb Aug 1 19:42:57 frya kernel: [ 0.120113] PCI: Probing PCI hardware Aug 1 19:42:57 frya kernel: [ 0.121015] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, Aug 1 19:42:57 frya kernel: [ 0.121020] * this clock source is slow. If you are sure your timer does not have Aug 1 19:42:57 frya kernel: [ 0.121024] * this bug, please use "acpi_pm_good" to disable the workaround Aug 1 19:42:57 frya kernel: [ 0.121563] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, Aug 1 19:42:57 frya kernel: [ 0.121568] * this clock source is slow. If you are sure your timer does not have Aug 1 19:42:57 frya kernel: [ 0.121572] * this bug, please use "acpi_pm_good" to disable the workaround Aug 1 19:42:57 frya kernel: [ 0.122165] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot Aug 1 19:42:57 frya kernel: [ 0.122290] pci 0000:00:02.0: PME# disabled Aug 1 19:42:57 frya kernel: [ 0.123082] pci 0000:00:04.0: PME# supported from D1 D2 D3hot Aug 1 19:42:57 frya kernel: [ 0.123205] pci 0000:00:04.0: PME# disabled Aug 1 19:42:57 frya kernel: [ 0.125105] PCI: Discovered peer bus 01 Aug 1 19:42:57 frya kernel: [ 0.125231] pci 0000:01:02.0: PME# supported from D3hot D3cold Aug 1 19:42:57 frya kernel: [ 0.125231] pci 0000:01:02.0: PME# disabled Aug 1 19:42:57 frya kernel: [ 0.127021] pci 0000:00:0f.0: ServerWorks IRQ router [1166:0200] Aug 1 19:42:57 frya kernel: [ 0.127174] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 20 Aug 1 19:42:57 frya kernel: [ 0.127301] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 17 Aug 1 19:42:57 frya kernel: [ 0.127436] pci 0000:01:02.0: PCI->APIC IRQ transform: INT A -> IRQ 21 Aug 1 19:42:57 frya kernel: [ 0.127563] pci 0000:01:03.0: PCI->APIC IRQ transform: INT A -> IRQ 22 Aug 1 19:42:57 frya kernel: [ 0.127689] pci 0000:01:05.0: PCI->APIC IRQ transform: INT A -> IRQ 24 Aug 1 19:42:57 frya kernel: [ 0.127816] pci 0000:01:05.1: PCI->APIC IRQ transform: INT B -> IRQ 25 Aug 1 19:42:57 frya kernel: [ 0.133586] pnp: PnP ACPI: disabled Aug 1 19:42:57 frya kernel: [ 0.168688] NET: Registered protocol family 2 Aug 1 19:42:57 frya kernel: [ 0.179171] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) Aug 1 19:42:57 frya kernel: [ 0.180115] TCP established hash table entries: 16384 (order: 5, 131072 bytes) Aug 1 19:42:57 frya kernel: [ 0.180590] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) Aug 1 19:42:57 frya kernel: [ 0.181150] TCP: Hash tables configured (established 16384 bind 16384) Aug 1 19:42:57 frya kernel: [ 0.181288] TCP reno registered Aug 1 19:42:57 frya kernel: [ 0.184310] NET: Registered protocol family 1 Aug 1 19:42:57 frya kernel: [ 0.184892] Simple Boot Flag at 0x3a set to 0x1 Aug 1 19:42:57 frya kernel: [ 0.185379] platform rtc_cmos: registered platform RTC device (no PNP device found) Aug 1 19:42:57 frya kernel: [ 0.187359] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba Aug 1 19:42:57 frya kernel: [ 0.187567] Scanning for low memory corruption every 60 seconds Aug 1 19:42:57 frya kernel: [ 0.189184] HugeTLB registered 4 MB page size, pre-allocated 0 pages Aug 1 19:42:57 frya kernel: [ 0.199152] VFS: Disk quotas dquot_6.5.2 Aug 1 19:42:57 frya kernel: [ 0.199571] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Aug 1 19:42:57 frya kernel: [ 0.202444] squashfs: version 4.0 (2009/01/31) Phillip Lougher Aug 1 19:42:57 frya kernel: [ 0.204076] NTFS driver 2.1.29 [Flags: R/W]. Aug 1 19:42:57 frya kernel: [ 0.204620] ROMFS MTD (C) 2007 Red Hat, Inc. Aug 1 19:42:57 frya kernel: [ 0.205139] fuse init (API version 7.11) Aug 1 19:42:57 frya kernel: [ 0.206068] msgmni has been set to 998 Aug 1 19:42:57 frya kernel: [ 0.206552] alg: No test for cipher_null (cipher_null-generic) Aug 1 19:42:57 frya kernel: [ 0.206776] alg: No test for ecb(cipher_null) (ecb-cipher_null) Aug 1 19:42:57 frya kernel: [ 0.207034] alg: No test for digest_null (digest_null-generic) Aug 1 19:42:57 frya kernel: [ 0.207244] alg: No test for compress_null (compress_null-generic) Aug 1 19:42:57 frya kernel: [ 0.210079] alg: No test for fcrypt (fcrypt-generic) Aug 1 19:42:57 frya kernel: [ 0.217331] alg: No test for stdrng (krng) Aug 1 19:42:57 frya kernel: [ 0.217581] alg: No test for stdrng (ansi_cprng) Aug 1 19:42:57 frya kernel: [ 0.217804] io scheduler noop registered Aug 1 19:42:57 frya kernel: [ 0.217919] io scheduler deadline registered (default) Aug 1 19:42:57 frya kernel: [ 0.218124] pci 0000:00:02.0: Firmware left e100 interrupts enabled; disabling Aug 1 19:42:57 frya kernel: [ 0.342517] Non-volatile memory driver v1.3 Aug 1 19:42:57 frya kernel: [ 0.342852] Linux agpgart interface v0.103 Aug 1 19:42:57 frya kernel: [ 0.343173] agpgart-serverworks 0000:00:00.0: agp_backend_initialize() failed Aug 1 19:42:57 frya kernel: [ 0.343310] agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 Aug 1 19:42:57 frya kernel: [ 0.343586] agpgart-serverworks 0000:00:00.1: agp_backend_initialize() failed Aug 1 19:42:57 frya kernel: [ 0.343718] agpgart-serverworks: probe of 0000:00:00.1 failed with error -22 Aug 1 19:42:57 frya kernel: [ 0.344055] ipmi message handler version 39.2 Aug 1 19:42:57 frya kernel: [ 0.344181] ipmi device interface Aug 1 19:42:57 frya kernel: [ 0.344515] IPMI System Interface driver. Aug 1 19:42:57 frya kernel: [ 0.356249] ipmi_si: Unable to find any System Interface(s) Aug 1 19:42:57 frya kernel: [ 0.356376] IPMI Watchdog: driver initialized Aug 1 19:42:57 frya kernel: [ 0.356488] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. Aug 1 19:42:57 frya kernel: [ 0.356713] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Aug 1 19:42:57 frya kernel: [ 0.356908] Hangcheck: Using get_cycles(). Aug 1 19:42:57 frya kernel: [ 0.357210] atyfb: using auxiliary register aperture Aug 1 19:42:57 frya kernel: [ 0.357754] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27] Aug 1 19:42:57 frya kernel: [ 0.357879] atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000. Aug 1 19:42:57 frya kernel: [ 0.358012] atyfb: BIOS frequency table: Aug 1 19:42:57 frya kernel: [ 0.358127] atyfb: PCLK_min_freq 984, PCLK_max_freq 23500, ref_freq 1432, ref_divider 31 Aug 1 19:42:57 frya kernel: [ 0.358322] atyfb: MCLK_pwd 4200, MCLK_max_freq 8000, XCLK_max_freq 6000, SCLK_freq 5000 Aug 1 19:42:57 frya kernel: [ 0.358542] atyfb: 4M SDRAM (2:1) (32-bit), 14.31818 MHz XTAL, 235 MHz PLL, 80 Mhz MCLK, 60 MHz XCLK Aug 1 19:42:57 frya kernel: [ 0.363765] mtrr: Serverworks LE rev < 6 detected. Write-combining disabled. Aug 1 19:42:57 frya kernel: [ 0.363893] mtrr: your processor doesn't support write-combining Aug 1 19:42:57 frya kernel: [ 0.364371] fbcon: ATY Mach64 (fb0) is primary device Aug 1 19:42:57 frya kernel: [ 0.419686] Console: switching to colour frame buffer device 80x30 Aug 1 19:42:57 frya kernel: [ 0.431314] atyfb: fb0: ATY Mach64 frame buffer device on PCI Aug 1 19:42:57 frya kernel: [ 0.436662] uvesafb: probe of uvesafb.0 failed with error -22 Aug 1 19:42:57 frya kernel: [ 0.439248] isapnp: Scanning for PnP cards... Aug 1 19:42:57 frya kernel: [ 0.797886] isapnp: No Plug & Play device found Aug 1 19:42:57 frya kernel: [ 0.800445] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Aug 1 19:42:57 frya kernel: [ 0.803566] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Aug 1 19:42:57 frya kernel: [ 0.807245] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Aug 1 19:42:57 frya kernel: [ 0.816232] brd: module loaded Aug 1 19:42:57 frya kernel: [ 0.822206] loop: module loaded Aug 1 19:42:57 frya kernel: [ 0.825914] 3ware Storage Controller device driver for Linux v1.26.02.002. Aug 1 19:42:57 frya kernel: [ 2.258030] scsi0 : 3ware Storage Controller Aug 1 19:42:57 frya kernel: [ 2.262541] 3w-xxxx: scsi0: Found a 3ware Storage Controller at 0xb400, IRQ: 22. Aug 1 19:42:57 frya kernel: [ 2.271840] scsi 0:0:0:0: Direct-Access 3ware Logical Disk 0 1.2 PQ: 0 ANSI: 0 Aug 1 19:42:57 frya kernel: [ 2.282249] Driver 'sd' needs updating - please use bus_type methods Aug 1 19:42:57 frya kernel: [ 2.287989] Driver 'sr' needs updating - please use bus_type methods Aug 1 19:42:57 frya kernel: [ 2.294446] sd 0:0:0:0: Attached scsi generic sg0 type 0 Aug 1 19:42:57 frya kernel: [ 2.300290] 3c59x: Donald Becker and others. Aug 1 19:42:57 frya kernel: [ 2.305920] 0000:00:04.0: 3Com PCI 3c905B Cyclone 100baseTx at e08fc000. Aug 1 19:42:57 frya kernel: [ 2.333223] sd 0:0:0:0: [sda] 703318656 512-byte hardware sectors: (360 GB/335 GiB) Aug 1 19:42:57 frya kernel: [ 2.344861] sd 0:0:0:0: [sda] Write Protect is off Aug 1 19:42:57 frya kernel: [ 2.350947] sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, supports DPO and FUA Aug 1 19:42:57 frya kernel: [ 2.362912] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI Aug 1 19:42:57 frya kernel: [ 2.368800] e100: Copyright(c) 1999-2006 Intel Corporation Aug 1 19:42:57 frya kernel: [ 2.397736] e100 0000:00:02.0: PME# disabled Aug 1 19:42:57 frya kernel: [ 2.404387] e100: eth1: e100_probe: addr 0xfe000000, irq 20, MAC addr 00:e0:18:29:b7:b5 Aug 1 19:42:57 frya kernel: [ 2.416482] tg3.c:v3.98 (February 25, 2009) Aug 1 19:42:57 frya kernel: [ 2.422685] sda:<6>tg3 0000:01:02.0: PME# disabled Aug 1 19:42:57 frya kernel: [ 2.430410] sda1 sda2 sda3 sda4 < sda5 > Aug 1 19:42:57 frya kernel: [ 2.449072] sd 0:0:0:0: [sda] Attached SCSI disk Aug 1 19:42:57 frya kernel: [ 3.456413] eth2: Tigon3 [partno(3C996B-T) rev 0105] (PCI:33MHz:64-bit) MAC address 00:0a:5e:1d:43:be Aug 1 19:42:57 frya kernel: [ 3.468527] eth2: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1]) Aug 1 19:42:57 frya kernel: [ 3.480590] eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] Aug 1 19:42:57 frya kernel: [ 3.486639] eth2: dma_rwctrl[76ff000f] dma_mask[64-bit] Aug 1 19:42:57 frya kernel: [ 3.493890] PPP generic driver version 2.4.2 Aug 1 19:42:57 frya kernel: [ 3.500502] PPP Deflate Compression module registered Aug 1 19:42:57 frya kernel: [ 3.506526] PPP BSD Compression module registered Aug 1 19:42:57 frya kernel: [ 3.515214] tun: Universal TUN/TAP device driver, 1.6 Aug 1 19:42:57 frya kernel: [ 3.521124] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Aug 1 19:42:57 frya kernel: [ 3.527782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 1 19:42:57 frya kernel: [ 3.533864] 116x: driver isp116x-hcd, 03 Nov 2005 Aug 1 19:42:57 frya kernel: [ 3.539741] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Aug 1 19:42:57 frya kernel: [ 3.545719] uhci_hcd: USB Universal Host Controller Interface driver Aug 1 19:42:57 frya kernel: [ 3.551687] sl811: driver sl811-hcd, 19 May 2005 Aug 1 19:42:57 frya kernel: [ 3.557453] r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008 Aug 1 19:42:57 frya kernel: [ 3.563489] usbcore: registered new interface driver cdc_acm Aug 1 19:42:57 frya kernel: [ 3.569211] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters Aug 1 19:42:57 frya kernel: [ 3.580821] usbcore: registered new interface driver usblp Aug 1 19:42:57 frya kernel: [ 3.586707] usbcore: registered new interface driver cdc_wdm Aug 1 19:42:57 frya kernel: [ 3.592365] Initializing USB Mass Storage driver... Aug 1 19:42:57 frya kernel: [ 3.598147] usbcore: registered new interface driver usb-storage Aug 1 19:42:57 frya kernel: [ 3.603931] USB Mass Storage support registered. Aug 1 19:42:57 frya kernel: [ 3.609708] usbcore: registered new interface driver libusual Aug 1 19:42:57 frya kernel: [ 3.615442] usbcore: registered new interface driver ums-alauda Aug 1 19:42:57 frya kernel: [ 3.620963] usbcore: registered new interface driver ums-cypress Aug 1 19:42:57 frya kernel: [ 3.626215] usbcore: registered new interface driver ums-datafab Aug 1 19:42:57 frya kernel: [ 3.631246] usbcore: registered new interface driver ums-freecom Aug 1 19:42:57 frya kernel: [ 3.636133] usbcore: registered new interface driver ums-isd200 Aug 1 19:42:57 frya kernel: [ 3.640885] usbcore: registered new interface driver ums-jumpshot Aug 1 19:42:57 frya kernel: [ 3.645535] usbcore: registered new interface driver ums-karma Aug 1 19:42:57 frya kernel: [ 3.650070] usbcore: registered new interface driver ums-onetouch Aug 1 19:42:57 frya kernel: [ 3.654487] usbcore: registered new interface driver ums-sddr09 Aug 1 19:42:57 frya kernel: [ 3.658749] usbcore: registered new interface driver ums-sddr55 Aug 1 19:42:57 frya kernel: [ 3.662807] usbcore: registered new interface driver ums-usbat Aug 1 19:42:57 frya kernel: [ 3.667016] PNP: No PS/2 controller found. Probing ports directly. Aug 1 19:42:57 frya kernel: [ 3.922383] serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 1 19:42:57 frya kernel: [ 3.926764] mice: PS/2 mouse device common for all mice Aug 1 19:42:57 frya kernel: [ 3.931126] I2O subsystem v1.325 Aug 1 19:42:57 frya kernel: [ 3.934771] i2o: max drivers = 8 Aug 1 19:42:57 frya kernel: [ 3.938790] I2O Configuration OSM v1.323 Aug 1 19:42:57 frya kernel: [ 3.942339] I2O Bus Adapter OSM v1.317 Aug 1 19:42:57 frya kernel: [ 3.945646] I2O Block Device OSM v1.325 Aug 1 19:42:57 frya kernel: [ 3.949246] I2O SCSI Peripheral OSM v1.316 Aug 1 19:42:57 frya kernel: [ 3.952514] I2O ProcFS OSM v1.316 Aug 1 19:42:57 frya kernel: [ 3.956216] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 Aug 1 19:42:57 frya kernel: [ 3.959462] rtc0: alarms up to one day, 114 bytes nvram Aug 1 19:42:57 frya kernel: [ 3.965202] i2c /dev entries driver Aug 1 19:42:57 frya kernel: [ 3.968833] piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0xe800, revision 0 Aug 1 19:42:57 frya kernel: [ 4.115067] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 Aug 1 19:42:57 frya kernel: [ 4.119227] iTCO_wdt: No card detected Aug 1 19:42:57 frya kernel: [ 4.123078] iTCO_vendor_support: vendor-support=0 Aug 1 19:42:57 frya kernel: [ 4.127055] SMsC 37B787 watchdog component driver 1.1 initialising... Aug 1 19:42:57 frya kernel: [ 4.132669] smsc37b787_wdt: Timeout set to 60 second(s). Aug 1 19:42:57 frya kernel: [ 4.137036] smsc37b787_wdt: Watchdog initialized and sleeping (nowayout=0)... Aug 1 19:42:57 frya kernel: [ 4.141798] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising. Aug 1 19:42:57 frya kernel: [ 4.151584] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec Aug 1 19:42:57 frya kernel: [ 4.173014] w83697hf/hg WDT: WDT driver for W83697HF/HG initializing Aug 1 19:42:57 frya kernel: [ 4.178682] w83697hf/hg WDT: watchdog not found at address 0x2e Aug 1 19:42:57 frya kernel: [ 4.190055] WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising. Aug 1 19:42:57 frya kernel: [ 4.214445] W83977F WDT: W83977F WDT driver, v1.00 Aug 1 19:42:57 frya kernel: [ 4.227045] EISA: Probing bus 0 at eisa.0 Aug 1 19:42:57 frya kernel: [ 4.233171] EISA: Detected 0 cards. Aug 1 19:42:57 frya kernel: [ 4.239051] cpuidle: using governor ladder Aug 1 19:42:57 frya kernel: [ 4.244772] cpuidle: using governor menu Aug 1 19:42:57 frya kernel: [ 4.253046] usbcore: registered new interface driver usbhid Aug 1 19:42:57 frya kernel: [ 4.258719] usbhid: v2.6:USB HID core driver Aug 1 19:42:57 frya kernel: [ 4.264653] GACT probability on Aug 1 19:42:57 frya kernel: [ 4.270141] Mirror/redirect action on Aug 1 19:42:57 frya kernel: [ 4.276643] u32 classifier Aug 1 19:42:57 frya kernel: [ 4.281928] Performance counters on Aug 1 19:42:57 frya kernel: [ 4.287117] input device check on Aug 1 19:42:57 frya kernel: [ 4.292090] Actions configured Aug 1 19:42:57 frya kernel: [ 4.296864] Netfilter messages via NETLINK v0.30. Aug 1 19:42:57 frya kernel: [ 4.301587] nf_conntrack version 0.5.0 (8191 buckets, 32764 max) Aug 1 19:42:57 frya kernel: [ 4.306653] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Aug 1 19:42:57 frya kernel: [ 4.315689] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or Aug 1 19:42:57 frya kernel: [ 4.325185] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Aug 1 19:42:57 frya kernel: [ 4.330372] ctnetlink v0.93: registering with nfnetlink. Aug 1 19:42:57 frya kernel: [ 4.335289] xt_time: kernel timezone is -0000 Aug 1 19:42:57 frya kernel: [ 4.341427] IPv4 over IPv4 tunneling driver Aug 1 19:42:57 frya kernel: [ 4.347336] GRE over IPv4 tunneling driver Aug 1 19:42:57 frya kernel: [ 4.353685] ip_tables: (C) 2000-2006 Netfilter Core Team Aug 1 19:42:57 frya kernel: [ 4.358486] TCP bic registered Aug 1 19:42:57 frya kernel: [ 4.363083] TCP cubic registered Aug 1 19:42:57 frya kernel: [ 4.367670] TCP westwood registered Aug 1 19:42:57 frya kernel: [ 4.372219] TCP htcp registered Aug 1 19:42:57 frya kernel: [ 4.376799] Initializing XFRM netlink socket Aug 1 19:42:57 frya kernel: [ 4.381372] NET: Registered protocol family 17 Aug 1 19:42:57 frya kernel: [ 4.385916] NET: Registered protocol family 15 Aug 1 19:42:57 frya kernel: [ 4.390344] Using IPI Shortcut mode Aug 1 19:42:57 frya kernel: [ 4.394755] ------------[ cut here ]------------ Aug 1 19:42:57 frya kernel: [ 4.399247] WARNING: at arch/x86/mm/ioremap.c:603 check_early_ioremap_leak+0x53/0x73() Aug 1 19:42:57 frya kernel: [ 4.408763] Hardware name: System Name Aug 1 19:42:57 frya kernel: [ 4.413574] Debug warning: early ioremap leak of 1 areas detected. Aug 1 19:42:57 frya kernel: [ 4.418561] Pid: 1, comm: swapper Not tainted 2.6.30-gentoo-r4 #1 Aug 1 19:42:57 frya kernel: [ 4.423552] Call Trace: Aug 1 19:42:57 frya kernel: [ 4.428379] [<c07c90b2>] ? check_early_ioremap_leak+0x53/0x73 Aug 1 19:42:57 frya kernel: [ 4.433238] [<c07c90b2>] ? check_early_ioremap_leak+0x53/0x73 Aug 1 19:42:57 frya kernel: [ 4.437821] [<c01316ac>] warn_slowpath_common+0x6c/0xc0 Aug 1 19:42:57 frya kernel: [ 4.442266] [<c07c90b2>] ? check_early_ioremap_leak+0x53/0x73 Aug 1 19:42:57 frya kernel: [ 4.446658] [<c07c905f>] ? check_early_ioremap_leak+0x0/0x73 Aug 1 19:42:57 frya kernel: [ 4.450880] [<c013174b>] warn_slowpath_fmt+0x2b/0x30 Aug 1 19:42:57 frya kernel: [ 4.455062] [<c07c90b2>] check_early_ioremap_leak+0x53/0x73 Aug 1 19:42:57 frya kernel: [ 4.459288] [<c010103f>] do_one_initcall+0x2f/0x160 Aug 1 19:42:57 frya kernel: [ 4.463528] [<c01e3d3a>] ? create_proc_entry+0x5a/0xb0 Aug 1 19:42:57 frya kernel: [ 4.467751] [<c015cfe5>] ? register_irq_proc+0xa5/0xc0 Aug 1 19:42:57 frya kernel: [ 4.471924] [<c015a1a8>] ? irq_to_desc+0x8/0x40 Aug 1 19:42:57 frya kernel: [ 4.476110] [<c015d075>] ? init_irq_proc+0x75/0x90 Aug 1 19:42:57 frya kernel: [ 4.480343] [<c07b95b5>] kernel_init+0x122/0x179 Aug 1 19:42:57 frya kernel: [ 4.484616] [<c07b9493>] ? kernel_init+0x0/0x179 Aug 1 19:42:57 frya kernel: [ 4.488860] [<c010397f>] kernel_thread_helper+0x7/0x10 Aug 1 19:42:57 frya kernel: [ 4.493137] ---[ end trace d2a1e0f2aa8609d9 ]--- Aug 1 19:42:57 frya kernel: [ 4.497524] please boot with early_ioremap_debug and report the dmesg. Aug 1 19:42:57 frya kernel: [ 4.503249] drivers/rtc/hctosys.c: unable to open rtc device (y) Aug 1 19:42:57 frya kernel: [ 4.526377] REISERFS (device sda3): found reiserfs format "3.6" with standard journal Aug 1 19:42:57 frya kernel: [ 4.535695] REISERFS (device sda3): using ordered data mode Aug 1 19:42:57 frya kernel: [ 4.546720] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Aug 1 19:42:57 frya kernel: [ 4.565193] REISERFS (device sda3): checking transaction log (sda3) Aug 1 19:42:57 frya kernel: [ 61.950144] REISERFS (device sda3): replayed 195 transactions in 57 seconds Aug 1 19:42:57 frya kernel: [ 61.955726] REISERFS (device sda3): Using r5 hash to sort names Aug 1 19:42:57 frya kernel: [ 61.976102] VFS: Mounted root (reiserfs filesystem) readonly on device 8:3. Aug 1 19:42:57 frya kernel: [ 61.981412] Freeing unused kernel memory: 468k freed Aug 1 19:42:57 frya kernel: [ 73.101356] udev: starting version 141 Aug 1 19:42:57 frya kernel: [ 78.332128] REISERFS (device sda3): Removing [3 24171599 0x0 SD]..done Aug 1 19:42:57 frya kernel: [ 78.332336] REISERFS (device sda3): Removing [3 24171529 0x0 SD]..done Aug 1 19:42:57 frya kernel: [ 78.332417] REISERFS (device sda3): Removing [3 24171512 0x0 SD]..done Aug 1 19:42:57 frya kernel: [ 78.332492] REISERFS (device sda3): Removing [3 24153663 0x0 SD]..done Aug 1 19:42:57 frya kernel: [ 78.332567] REISERFS (device sda3): Removing [3 24073847 0x0 SD]..done Aug 1 19:42:57 frya kernel: [ 78.332634] REISERFS (device sda3): There were 5 uncompleted unlinks/truncates. Completed Aug 1 19:42:57 frya kernel: [ 78.519769] REISERFS (device sda5): found reiserfs format "3.6" with standard journal Aug 1 19:42:57 frya kernel: [ 78.519808] REISERFS (device sda5): using ordered data mode Aug 1 19:42:57 frya kernel: [ 78.536287] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Aug 1 19:42:57 frya kernel: [ 78.540304] REISERFS (device sda5): checking transaction log (sda5) Aug 1 19:42:57 frya kernel: [ 78.631246] REISERFS (device sda5): Using r5 hash to sort names Aug 1 19:42:57 frya kernel: [ 81.336374] Adding 136512k swap on /dev/sda1. Priority:-1 extents:1 across:136512k Aug 1 19:42:57 frya kernel: [ 84.013334] eth0: setting full-duplex. Aug 1 19:42:58 frya kernel: [ 84.443612] tg3 0000:01:02.0: PME# disabled Aug 1 19:43:00 frya kernel: [ 86.313272] tg3: eth2: Link is up at 100 Mbps, full duplex. Aug 1 19:43:00 frya kernel: [ 86.313282] tg3: eth2: Flow control is on for TX and on for RX. Aug 1 19:57:47 frya syslogd 1.5.0: restart. Aug 1 19:57:48 frya kernel: klogd 1.5.0, log source = /proc/kmsg started. Aug 1 19:57:48 frya kernel: Inspecting /usr/src/linux/System.map Aug 1 19:57:48 frya kernel: Cannot find map file. Aug 1 19:57:48 frya kernel: Loaded 32195 symbols from 1 module. Aug 1 19:57:48 frya kernel: [ 0.000000] Linux version 2.6.30-gentoo-r4 (root@frya) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #1 SMP Sat Aug 1 16:55:18 MSD 2009 You can see here system have no warnings before it freezes and manually resetted. Appendix #5 and #6 (.config file for every kernel, 2.6.29.5 and 2.6.30.4)- see attachments. Thanks in advance, Osipov Stanislav Linux System Administrator. [-- Attachment #2: .config-2.6.29.5 --] [-- Type: application/octet-stream, Size: 43778 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.29-gentoo-r5 # Sun Jun 7 01:11:15 2009 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # # CONFIG_EXPERIMENTAL is not set CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # # CONFIG_CLASSIC_RCU is not set CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_INTEGRITY=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_FREEZER is not set # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SPARSE_IRQ=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_VSMP is not set # CONFIG_X86_RDC321X is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST=y # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR_32=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y # CONFIG_X86_DS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=2 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_X86_PAE=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW_64K=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_PHYSICAL_START=0x100000 CONFIG_PHYSICAL_ALIGN=0x100000 # CONFIG_HOTPLUG_CPU is not set # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set # # Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_HIBERNATION is not set CONFIG_ACPI=y # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_PROCFS_POWER is not set CONFIG_ACPI_SYSFS_POWER=y # CONFIG_ACPI_PROC_EVENT is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set # CONFIG_ACPI_BUTTON is not set CONFIG_ACPI_VIDEO=y # CONFIG_ACPI_FAN is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_PCI_SLOT=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set # CONFIG_PCI_GOOLPC is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_HT_IRQ is not set CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set CONFIG_SCx200=y CONFIG_SCx200HR_TIMER=y # CONFIG_OLPC is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_NET=y # # Networking options # CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_VERBOSE is not set # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_GRE=y CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=y CONFIG_NF_CONNTRACK_FTP=y CONFIG_NF_CONNTRACK_H323=y CONFIG_NF_CONNTRACK_IRC=y CONFIG_NF_CONNTRACK_NETBIOS_NS=y CONFIG_NF_CONNTRACK_PPTP=y CONFIG_NF_CONNTRACK_SIP=y CONFIG_NF_CONNTRACK_TFTP=y CONFIG_NF_CT_NETLINK=y CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y CONFIG_NETFILTER_XT_TARGET_CONNMARK=y CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y CONFIG_NETFILTER_XT_TARGET_DSCP=y CONFIG_NETFILTER_XT_TARGET_MARK=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y CONFIG_NETFILTER_XT_TARGET_RATEEST=y CONFIG_NETFILTER_XT_TARGET_SECMARK=y CONFIG_NETFILTER_XT_TARGET_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_COMMENT=y CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y CONFIG_NETFILTER_XT_MATCH_CONNMARK=y CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_DCCP=y CONFIG_NETFILTER_XT_MATCH_DSCP=y CONFIG_NETFILTER_XT_MATCH_ESP=y CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y CONFIG_NETFILTER_XT_MATCH_HELPER=y CONFIG_NETFILTER_XT_MATCH_IPRANGE=y CONFIG_NETFILTER_XT_MATCH_LENGTH=y CONFIG_NETFILTER_XT_MATCH_LIMIT=y CONFIG_NETFILTER_XT_MATCH_MAC=y CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y CONFIG_NETFILTER_XT_MATCH_OWNER=y CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y CONFIG_NETFILTER_XT_MATCH_QUOTA=y CONFIG_NETFILTER_XT_MATCH_RATEEST=y CONFIG_NETFILTER_XT_MATCH_REALM=y CONFIG_NETFILTER_XT_MATCH_RECENT=y # CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_STATE=y CONFIG_NETFILTER_XT_MATCH_STATISTIC=y CONFIG_NETFILTER_XT_MATCH_STRING=y CONFIG_NETFILTER_XT_MATCH_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_TIME=y CONFIG_NETFILTER_XT_MATCH_U32=y # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=y CONFIG_NF_CONNTRACK_IPV4=y # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_ADDRTYPE=y CONFIG_IP_NF_MATCH_AH=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_NF_NAT=y CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_NETMAP=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_NF_NAT_SNMP_BASIC=y CONFIG_NF_NAT_PROTO_GRE=y CONFIG_NF_NAT_PROTO_UDPLITE=y CONFIG_NF_NAT_FTP=y CONFIG_NF_NAT_IRC=y CONFIG_NF_NAT_TFTP=y CONFIG_NF_NAT_AMANDA=y CONFIG_NF_NAT_PPTP=y CONFIG_NF_NAT_H323=y CONFIG_NF_NAT_SIP=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_TTL=y # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_SECURITY is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y # CONFIG_NET_SCH_NETEM is not set CONFIG_NET_SCH_DRR=y CONFIG_NET_SCH_INGRESS=y # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y CONFIG_NET_CLS_FLOW=y CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=y CONFIG_NET_EMATCH_NBYTE=y CONFIG_NET_EMATCH_U32=y CONFIG_NET_EMATCH_META=y CONFIG_NET_EMATCH_TEXT=y CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=y CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=y CONFIG_NET_ACT_IPT=y CONFIG_NET_ACT_NAT=y CONFIG_NET_ACT_PEDIT=y # CONFIG_NET_ACT_SIMP is not set CONFIG_NET_ACT_SKBEDIT=y CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_PHONET is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set CONFIG_BLK_DEV_3W_XXXX_RAID=y # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_SRP=y # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set CONFIG_I2O=y CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_CONFIG=y # CONFIG_I2O_CONFIG_OLD_IOCTL is not set CONFIG_I2O_BUS=y CONFIG_I2O_BLOCK=y CONFIG_I2O_SCSI=y CONFIG_I2O_PROC=y # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_IFB=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set CONFIG_LXT_PHY=y # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y # CONFIG_TYPHOON is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y # CONFIG_SLIP is not set CONFIG_SLHC=y # CONFIG_NET_FC is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_WISTRON_BTNS is not set # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_POWERMATE is not set CONFIG_INPUT_UINPUT=y # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_IPMI_HANDLER=y # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_GEODE is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_SCx200_GPIO is not set # CONFIG_PC8736x_GPIO is not set CONFIG_NSC_GPIO=y # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set CONFIG_I2C_ISCH=y CONFIG_I2C_PIIX4=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_SIMTEC is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers # # CONFIG_I2C_VOODOO3 is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_SCx200_ACB is not set # # Miscellaneous I2C Chip support # # CONFIG_PCF8575 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IBMAEM is not set # CONFIG_SENSORS_IBMPEX is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT8231 is not set CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set CONFIG_ALIM1535_WDT=y # CONFIG_ALIM7101_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set CONFIG_I6300ESB_WDT=y # CONFIG_ITCO_WDT is not set CONFIG_IT8712F_WDT=y # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set CONFIG_SCx200_WDT=y # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_SBC7240_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC_SCH311X_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83697HF_WDT is not set # CONFIG_W83697UG_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # # Multimedia devices # # # Multimedia core support # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set CONFIG_AGP_SWORKS=y # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_UVESA=y # CONFIG_FB_VESA is not set # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y # CONFIG_BACKLIGHT_PROGEAR is not set # CONFIG_BACKLIGHT_MBP_NVIDIA is not set # CONFIG_BACKLIGHT_SAHARA is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FB_CON_DECOR=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_FONT_6x11=y CONFIG_FONT_7x14=y # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y CONFIG_HID_PID=y # CONFIG_USB_HIDDEV is not set # # Special HID drivers # CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y # CONFIG_GREENASIA_FF is not set CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WUSB_CBAF=y # CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OXU210HP_HCD=y CONFIG_USB_ISP116X_HCD=y CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y CONFIG_USB_R8A66597_HCD=y # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y CONFIG_USB_WDM=y # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # # see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_STORAGE_CYPRESS_ATACB=y CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="y" CONFIG_RTC_DEBUG=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS1672=y CONFIG_RTC_DRV_MAX6900=y CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_ISL1208=y CONFIG_RTC_DRV_X1205=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_PCF8583=y CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_FM3130=y CONFIG_RTC_DRV_RX8581=y # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1286=y CONFIG_RTC_DRV_DS1511=y CONFIG_RTC_DRV_DS1553=y CONFIG_RTC_DRV_DS1742=y CONFIG_RTC_DRV_STK17TA8=y CONFIG_RTC_DRV_M48T86=y CONFIG_RTC_DRV_M48T35=y CONFIG_RTC_DRV_M48T59=y CONFIG_RTC_DRV_BQ4802=y CONFIG_RTC_DRV_V3020=y # # on-CPU RTC drivers # CONFIG_DMADEVICES=y # # DMA Devices # CONFIG_INTEL_IOATDMA=y CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y # CONFIG_DMATEST is not set CONFIG_DCA=y # CONFIG_UIO is not set # CONFIG_STAGING is not set # CONFIG_X86_PLATFORM_DEVICES is not set # # Firmware Drivers # CONFIG_EDD=y CONFIG_EDD_OFF=y CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4DEV_COMPAT=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=866 CONFIG_FAT_DEFAULT_IOCHARSET="cp1251" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set CONFIG_CRAMFS=y CONFIG_SQUASHFS=y # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set CONFIG_SMB_FS=y CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp1251" CONFIG_CIFS=y CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y # CONFIG_CIFS_UPCALL is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp1251" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set CONFIG_NLS_CODEPAGE_866=y # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set CONFIG_NLS_CODEPAGE_1251=y # CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set CONFIG_NLS_ISO8859_5=y # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set CONFIG_NLS_KOI8_R=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y CONFIG_RCU_CPU_STALL_DETECTOR=y CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers # # CONFIG_SYSPROF_TRACER is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_OPTIMIZE_INLINING=y # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y # # Hash modes # CONFIG_CRYPTO_HMAC=y # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_RMD128=y CONFIG_CRYPTO_RMD160=y CONFIG_CRYPTO_RMD256=y CONFIG_CRYPTO_RMD320=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_586=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_SEED=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_586=y # # Compression # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=y # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y # CONFIG_VIRTUALIZATION is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y [-- Attachment #3: .config-2.6.30.4 --] [-- Type: application/octet-stream, Size: 46821 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30-gentoo-r4 # Sat Aug 1 16:08:37 2009 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_X86_32_LAZY_GS=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # # CONFIG_EXPERIMENTAL is not set CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set # CONFIG_PREEMPT_RCU is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_API_DEBUG=y # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y CONFIG_BLK_DEV_INTEGRITY=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_FREEZER is not set # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SPARSE_IRQ=y CONFIG_X86_MPPARSE=y # CONFIG_X86_BIGSMP is not set # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST=y # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y # CONFIG_X86_DS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_SCHED_MC is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_X86_CPU_DEBUG is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_X86_PAE is not set # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW_64K=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 # CONFIG_X86_PAT is not set # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_PHYSICAL_START=0x100000 CONFIG_PHYSICAL_ALIGN=0x100000 # CONFIG_HOTPLUG_CPU is not set # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set # # Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_HIBERNATION is not set CONFIG_ACPI=y # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_PROCFS_POWER is not set CONFIG_ACPI_SYSFS_POWER=y # CONFIG_ACPI_PROC_EVENT is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_FAN is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set # CONFIG_PCI_GOOLPC is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_HT_IRQ is not set CONFIG_PCI_IOV=y CONFIG_ISA_DMA_API=y CONFIG_ISA=y CONFIG_EISA=y CONFIG_EISA_VLB_PRIMING=y CONFIG_EISA_PCI_EISA=y CONFIG_EISA_VIRTUAL_ROOT=y CONFIG_EISA_NAMES=y # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_OLPC is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_SYN_COOKIES is not set CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=y CONFIG_TCP_CONG_HTCP=y # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_GRE=y CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=y CONFIG_NF_CONNTRACK_FTP=y CONFIG_NF_CONNTRACK_H323=y CONFIG_NF_CONNTRACK_IRC=y CONFIG_NF_CONNTRACK_NETBIOS_NS=y CONFIG_NF_CONNTRACK_PPTP=y CONFIG_NF_CONNTRACK_SIP=y CONFIG_NF_CONNTRACK_TFTP=y CONFIG_NF_CT_NETLINK=y CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y CONFIG_NETFILTER_XT_TARGET_CONNMARK=y CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y CONFIG_NETFILTER_XT_TARGET_DSCP=y CONFIG_NETFILTER_XT_TARGET_HL=y CONFIG_NETFILTER_XT_TARGET_MARK=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y CONFIG_NETFILTER_XT_TARGET_RATEEST=y CONFIG_NETFILTER_XT_TARGET_SECMARK=y CONFIG_NETFILTER_XT_TARGET_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_CLUSTER=y CONFIG_NETFILTER_XT_MATCH_COMMENT=y CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y CONFIG_NETFILTER_XT_MATCH_CONNMARK=y CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_DCCP=y CONFIG_NETFILTER_XT_MATCH_DSCP=y CONFIG_NETFILTER_XT_MATCH_ESP=y CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y CONFIG_NETFILTER_XT_MATCH_HELPER=y CONFIG_NETFILTER_XT_MATCH_HL=y CONFIG_NETFILTER_XT_MATCH_IPRANGE=y CONFIG_NETFILTER_XT_MATCH_LENGTH=y CONFIG_NETFILTER_XT_MATCH_LIMIT=y CONFIG_NETFILTER_XT_MATCH_MAC=y CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y CONFIG_NETFILTER_XT_MATCH_OWNER=y CONFIG_NETFILTER_XT_MATCH_POLICY=y CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y CONFIG_NETFILTER_XT_MATCH_QUOTA=y CONFIG_NETFILTER_XT_MATCH_RATEEST=y CONFIG_NETFILTER_XT_MATCH_REALM=y CONFIG_NETFILTER_XT_MATCH_RECENT=y # CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_STATE=y CONFIG_NETFILTER_XT_MATCH_STATISTIC=y CONFIG_NETFILTER_XT_MATCH_STRING=y CONFIG_NETFILTER_XT_MATCH_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_TIME=y CONFIG_NETFILTER_XT_MATCH_U32=y # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=y CONFIG_NF_CONNTRACK_IPV4=y # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_ADDRTYPE=y CONFIG_IP_NF_MATCH_AH=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_NF_NAT=y CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_NETMAP=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_NF_NAT_SNMP_BASIC=y CONFIG_NF_NAT_PROTO_GRE=y CONFIG_NF_NAT_PROTO_UDPLITE=y CONFIG_NF_NAT_FTP=y CONFIG_NF_NAT_IRC=y CONFIG_NF_NAT_TFTP=y CONFIG_NF_NAT_AMANDA=y CONFIG_NF_NAT_PPTP=y CONFIG_NF_NAT_H323=y CONFIG_NF_NAT_SIP=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_TTL=y # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_SECURITY is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_PHONET is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y # CONFIG_NET_SCH_NETEM is not set CONFIG_NET_SCH_DRR=y CONFIG_NET_SCH_INGRESS=y # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y CONFIG_NET_CLS_FLOW=y CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=y CONFIG_NET_EMATCH_NBYTE=y CONFIG_NET_EMATCH_U32=y CONFIG_NET_EMATCH_META=y CONFIG_NET_EMATCH_TEXT=y CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=y CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=y CONFIG_NET_ACT_IPT=y CONFIG_NET_ACT_NAT=y CONFIG_NET_ACT_PEDIT=y # CONFIG_NET_ACT_SIMP is not set CONFIG_NET_ACT_SKBEDIT=y CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_ISAPNP=y CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set CONFIG_BLK_DEV_3W_XXXX_RAID=y # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_FCOE_FNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set CONFIG_I2O=y CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_CONFIG=y # CONFIG_I2O_CONFIG_OLD_IOCTL is not set CONFIG_I2O_BUS=y CONFIG_I2O_BLOCK=y CONFIG_I2O_SCSI=y CONFIG_I2O_PROC=y # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_IFB=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set CONFIG_LXT_PHY=y # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set CONFIG_VORTEX=y # CONFIG_TYPHOON is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y # CONFIG_SLIP is not set CONFIG_SLHC=y # CONFIG_NET_FC is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_WISTRON_BTNS is not set # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_POWERMATE is not set CONFIG_INPUT_UINPUT=y # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=y CONFIG_HW_RANDOM_INTEL=y # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_GEODE is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOPCA=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=y CONFIG_I2C_ISCH=y CONFIG_I2C_PIIX4=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_SIMTEC is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers # # CONFIG_I2C_VOODOO3 is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_ISA is not set CONFIG_I2C_PCA_PLATFORM=y # CONFIG_SCx200_ACB is not set # # Miscellaneous I2C Chip support # # CONFIG_PCF8575 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set CONFIG_SENSORS_G760A=y # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IBMAEM is not set # CONFIG_SENSORS_IBMPEX is not set CONFIG_SENSORS_IT87=y CONFIG_SENSORS_LM63=y CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM77=y CONFIG_SENSORS_LM78=y CONFIG_SENSORS_LM83=y CONFIG_SENSORS_LM87=y CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set CONFIG_SENSORS_PCF8591=y # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT8231 is not set CONFIG_SENSORS_W83781D=y CONFIG_SENSORS_W83627HF=y CONFIG_SENSORS_W83627EHF=y # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set CONFIG_ALIM1535_WDT=y # CONFIG_ALIM7101_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set CONFIG_ITCO_WDT=y CONFIG_ITCO_VENDOR_SUPPORT=y CONFIG_IT8712F_WDT=y # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_SBC7240_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC_SCH311X_WDT is not set CONFIG_SMSC37B787_WDT=y CONFIG_W83627HF_WDT=y CONFIG_W83697HF_WDT=y CONFIG_W83697UG_WDT=y CONFIG_W83877F_WDT=y CONFIG_W83977F_WDT=y # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # ISA-based Watchdog Cards # # CONFIG_PCWATCHDOG is not set # CONFIG_MIXCOMWD is not set # CONFIG_WDT is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # # Multimedia devices # # # Multimedia core support # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set CONFIG_AGP_SWORKS=y # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_UVESA=y CONFIG_FB_VESA=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set CONFIG_FB_ATY_GX=y # CONFIG_FB_ATY_BACKLIGHT is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FB_CON_DECOR=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_HID_PID=y # CONFIG_USB_HIDDEV is not set # # Special HID drivers # CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y # CONFIG_GREENASIA_FF is not set CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WUSB_CBAF=y # CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OXU210HP_HCD=y CONFIG_USB_ISP116X_HCD=y CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y CONFIG_USB_R8A66597_HCD=y # # USB Device Class drivers # CONFIG_USB_ACM=y CONFIG_USB_PRINTER=y CONFIG_USB_WDM=y # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_STORAGE_CYPRESS_ATACB=y CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="y" CONFIG_RTC_DEBUG=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS1672=y CONFIG_RTC_DRV_MAX6900=y CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_ISL1208=y CONFIG_RTC_DRV_X1205=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_PCF8583=y CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_FM3130=y CONFIG_RTC_DRV_RX8581=y # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1286=y CONFIG_RTC_DRV_DS1511=y CONFIG_RTC_DRV_DS1553=y CONFIG_RTC_DRV_DS1742=y CONFIG_RTC_DRV_STK17TA8=y CONFIG_RTC_DRV_M48T86=y CONFIG_RTC_DRV_M48T35=y CONFIG_RTC_DRV_M48T59=y CONFIG_RTC_DRV_BQ4802=y CONFIG_RTC_DRV_V3020=y # # on-CPU RTC drivers # CONFIG_DMADEVICES=y # # DMA Devices # CONFIG_INTEL_IOATDMA=y CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set CONFIG_DCA=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_DELL_WMI is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set CONFIG_ACPI_WMI=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4DEV_COMPAT=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y CONFIG_GENERIC_ACL=y # # Caches # # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=866 CONFIG_FAT_DEFAULT_IOCHARSET="cp1251" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set CONFIG_CRAMFS=y CONFIG_SQUASHFS=y # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y CONFIG_ROMFS_BACKED_BY_BLOCK=y # CONFIG_ROMFS_BACKED_BY_MTD is not set # CONFIG_ROMFS_BACKED_BY_BOTH is not set CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set CONFIG_CIFS=y CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y CONFIG_CIFS_DEBUG2=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp1251" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set CONFIG_NLS_CODEPAGE_866=y # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set CONFIG_NLS_CODEPAGE_1251=y # CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set CONFIG_NLS_ISO8859_5=y # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set CONFIG_NLS_KOI8_R=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y CONFIG_RCU_CPU_STALL_DETECTOR=y CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FTRACE_SYSCALLS=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y # # Tracers # CONFIG_FUNCTION_TRACER=y # CONFIG_FUNCTION_GRAPH_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set CONFIG_CONTEXT_SWITCH_TRACER=y # CONFIG_EVENT_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_POWER_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_FTRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_STRICT_DEVMEM=y # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_OPTIMIZE_INLINING=y # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_IMA is not set CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y # # Hash modes # CONFIG_CRYPTO_HMAC=y # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_RMD128=y CONFIG_CRYPTO_RMD160=y CONFIG_CRYPTO_RMD256=y CONFIG_CRYPTO_RMD320=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_586=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_SEED=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_586=y # # Compression # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=y # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=y # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y # CONFIG_VIRTUALIZATION is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2009-08-19 15:20 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-08-07 22:51 2.6.30.1-4 kernels freezes dual pentium-3 system devzero 2009-08-10 14:42 ` John Stoffel 2009-08-18 14:40 ` John Stoffel 2009-08-19 14:53 ` Vince Weaver -- strict thread matches above, loose matches on Subject: below -- 2009-08-08 21:25 devzero 2009-08-08 9:49 devzero 2009-08-08 21:03 ` Martin Rogge 2009-08-08 8:19 Martin Rogge 2009-08-03 16:25 Martin Rogge 2009-08-07 20:29 ` Martin Rogge 2009-08-10 14:38 ` John Stoffel 2009-08-03 8:44 Осипов Станислав
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox