From: yhlu <yhlu.kernel@gmail.com>
To: Roland Dreier <rolandd@cisco.com>
Cc: linux-kernel@vger.kernel.org, openib-general@openib.org
Subject: Re: mthca and LinuxBIOS
Date: Fri, 5 Aug 2005 11:07:27 -0700 [thread overview]
Message-ID: <86802c4405080511079d01532@mail.gmail.com> (raw)
In-Reply-To: <86802c440508051103500f6942@mail.gmail.com>
ps.
some kernel pci code patch broke sth yesterday night.
it mask out bit [32-39]
ib_mthca 0000:04:00.0: profile[ 0]--10/20 @ 0x e0000000 (size 0x 4000000)
ib_mthca 0000:04:00.0: profile[ 1]-- 0/16 @ 0x e4000000 (size 0x 1000000)
ib_mthca 0000:04:00.0: profile[ 2]-- 7/18 @ 0x e5000000 (size 0x 800000)
ib_mthca 0000:04:00.0: profile[ 3]-- 9/17 @ 0x e5800000 (size 0x 800000)
ib_mthca 0000:04:00.0: profile[ 4]-- 3/16 @ 0x e6000000 (size 0x 400000)
ib_mthca 0000:04:00.0: profile[ 5]-- 4/16 @ 0x e6400000 (size 0x 200000)
ib_mthca 0000:04:00.0: profile[ 6]--12/15 @ 0x e6600000 (size 0x 100000)
ib_mthca 0000:04:00.0: profile[ 7]-- 8/13 @ 0x e6700000 (size 0x 80000)
ib_mthca 0000:04:00.0: profile[ 8]--11/11 @ 0x e6780000 (size 0x 10000)
ib_mthca 0000:04:00.0: profile[ 9]-- 6/ 5 @ 0x e6790000 (size
0x 800)
YH
On 8/5/05, yhlu <yhlu.kernel@gmail.com> wrote:
> You are right. CONG_SPECIAL_QP
>
> ib_mthca: Mellanox InfiniBand HCA driver v0.06 (June 23, 2005)
> ib_mthca: Initializing Mellanox Technologies MT25208 InfiniHost III Ex
> (Tavor compatibility mode) (0000:04:00.0)
> ib_mthca 0000:04:00.0: FW version 000400060002, max commands 64
> ib_mthca 0000:04:00.0: FW size 6143 KB (start fcefa00000, end fcefffffff)
> ib_mthca 0000:04:00.0: HCA memory size 262143 KB (start fce0000000,
> end fcefffffff)
> ib_mthca 0000:04:00.0: Max QPs: 16777216, reserved QPs: 1024, entry size: 256
> ib_mthca 0000:04:00.0: Max CQs: 16777216, reserved CQs: 128, entry size: 64
> ib_mthca 0000:04:00.0: Max EQs: 64, reserved EQs: 1, entry size: 64
> ib_mthca 0000:04:00.0: reserved MPTs: 16, reserved MTTs: 16
> ib_mthca 0000:04:00.0: Max PDs: 16777216, reserved PDs: 0, reserved UARs: 1
> ib_mthca 0000:04:00.0: Max QP/MCG: 16777216, reserved MGMs: 0
> ib_mthca 0000:04:00.0: Flags: 00370347
> ib_mthca 0000:04:00.0: profile[ 0]--10/20 @ 0x fce0000000 (size 0x 4000000)
> ib_mthca 0000:04:00.0: profile[ 1]-- 0/16 @ 0x fce4000000 (size 0x 1000000)
> ib_mthca 0000:04:00.0: profile[ 2]-- 7/18 @ 0x fce5000000 (size 0x 800000)
> ib_mthca 0000:04:00.0: profile[ 3]-- 9/17 @ 0x fce5800000 (size 0x 800000)
> ib_mthca 0000:04:00.0: profile[ 4]-- 3/16 @ 0x fce6000000 (size 0x 400000)
> ib_mthca 0000:04:00.0: profile[ 5]-- 4/16 @ 0x fce6400000 (size 0x 200000)
> ib_mthca 0000:04:00.0: profile[ 6]--12/15 @ 0x fce6600000 (size 0x 100000)
> ib_mthca 0000:04:00.0: profile[ 7]-- 8/13 @ 0x fce6700000 (size 0x 80000)
> ib_mthca 0000:04:00.0: profile[ 8]--11/11 @ 0x fce6780000 (size 0x 10000)
> ib_mthca 0000:04:00.0: profile[ 9]-- 6/ 5 @ 0x fce6790000 (size 0x 800)
> ib_mthca 0000:04:00.0: HCA memory: allocated 106050 KB/256000 KB
> (149950 KB free)
> ib_mthca 0000:04:00.0: Allocated EQ 1 with 65536 entries
> ib_mthca 0000:04:00.0: Allocated EQ 2 with 128 entries
> ib_mthca 0000:04:00.0: Allocated EQ 3 with 128 entries
> ib_mthca 0000:04:00.0: Setting mask 00000000000f43fe for eqn 2
> ib_mthca 0000:04:00.0: Setting mask 0000000000000400 for eqn 3
> ib_mthca 0000:04:00.0: NOP command IRQ test passed
> ib_mthca 0000:04:00.0: mthca_init_qp_table: mthca_CONF_SPECIAL_QP
> failed for 0/1024 (-16)
> ib_mthca 0000:04:00.0: Failed to initialize queue pair table, aborting.
> ib_mthca 0000:04:00.0: Clearing mask 00000000000f43fe for eqn 2
> ib_mthca 0000:04:00.0: Clearing mask 0000000000000400 for eqn 3
> ib_mthca: probe of 0000:04:00.0 failed with error -16
>
next prev parent reply other threads:[~2005-08-05 18:07 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-28 20:31 [PATCH 0/2] REALLY final InfiniBand updates for 2.6.13 Roland Dreier
2005-07-28 20:31 ` [PATCH 1/2] [IB/cm]: Correct CM port redirect reject codes Roland Dreier
2005-07-28 20:31 ` [PATCH 2/2] [IPoIB] Handle sending of unicast RARP responses Roland Dreier
2005-08-04 0:58 ` [PATCH 1/2] [IB/cm]: Correct CM port redirect reject codes yhlu
2005-08-04 1:39 ` [openib-general] " Grant Grundler
2005-08-04 4:44 ` mthca and LinuxBIOS (was: [PATCH 1/2] [IB/cm]: Correct CM port redirect reject codes) Roland Dreier
2005-08-04 16:33 ` yhlu
2005-08-04 16:36 ` mthca and LinuxBIOS Roland Dreier
2005-08-04 17:23 ` yhlu
2005-08-04 18:01 ` yhlu
2005-08-04 18:35 ` Roland Dreier
2005-08-04 19:30 ` yhlu
2005-08-05 3:47 ` Roland Dreier
2005-08-05 18:03 ` yhlu
2005-08-05 18:07 ` yhlu [this message]
2005-08-05 18:13 ` Roland Dreier
2005-08-05 18:26 ` yhlu
2005-08-05 19:25 ` yhlu
2005-08-05 19:45 ` yhlu
2005-08-05 20:28 ` yhlu
2005-08-05 20:38 ` Linus Torvalds
2005-08-05 22:00 ` Greg KH
2005-08-05 22:25 ` yhlu
2005-08-05 23:03 ` Greg KH
2005-08-06 5:29 ` [openib-general] " Grant Grundler
2005-08-05 23:06 ` Linus Torvalds
2005-08-05 23:59 ` [openib-general] " Grant Grundler
2005-08-06 4:33 ` Grant Grundler
2005-08-06 23:52 ` yhlu
2005-08-07 9:49 ` Ivan Kokshaysky
2005-08-05 18:11 ` Roland Dreier
2005-08-06 0:57 ` yhlu
2005-08-06 1:30 ` Roland Dreier
2005-08-06 2:47 ` yhlu
2005-08-04 6:42 ` [PATCH 1/2] [IB/cm]: Correct CM port redirect reject codes Michael S. Tsirkin
2005-08-04 18:22 ` yhlu
2005-08-08 12:21 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86802c4405080511079d01532@mail.gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=openib-general@openib.org \
--cc=rolandd@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox