linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Raghavendra Rao Ananta <rananta@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>,
	Alexandru Elisei <alexandru.elisei@arm.com>,
	James Morse <james.morse@arm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Shaoqin Huang <shahuang@redhat.com>,
	Jing Zhang <jingzhangos@google.com>,
	Reiji Watanabe <reijiw@google.com>,
	Colton Lewis <coltonlewis@google.com>,
	linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev,
	linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: Re: [PATCH v8 07/13] KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
Date: Mon, 23 Oct 2023 14:00:18 +0100	[thread overview]
Message-ID: <86wmvd4hp9.wl-maz@kernel.org> (raw)
In-Reply-To: <20231020214053.2144305-8-rananta@google.com>

On Fri, 20 Oct 2023 22:40:47 +0100,
Raghavendra Rao Ananta <rananta@google.com> wrote:
> 
> From: Reiji Watanabe <reijiw@google.com>
> 
> KVM does not yet support userspace modifying PMCR_EL0.N (With
> the previous patch, KVM ignores what is written by userspace).
> Add support userspace limiting PMCR_EL0.N.
> 
> Disallow userspace to set PMCR_EL0.N to a value that is greater
> than the host value as KVM doesn't support more event counters
> than what the host HW implements. Also, make this register
> immutable after the VM has started running. To maintain the
> existing expectations, instead of returning an error, KVM
> returns a success for these two cases.
> 
> Finally, ignore writes to read-only bits that are cleared on
> vCPU reset, and RES{0,1} bits (including writable bits that
> KVM doesn't support yet), as those bits shouldn't be modified
> (at least with the current KVM).
> 
> Signed-off-by: Reiji Watanabe <reijiw@google.com>
> Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
> ---
>  arch/arm64/kvm/sys_regs.c | 57 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 55 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 2e5d497596ef8..a2c5f210b3d6b 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -1176,6 +1176,59 @@ static int get_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
>  	return 0;
>  }
>  
> +static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
> +		    u64 val)
> +{
> +	struct kvm *kvm = vcpu->kvm;
> +	u64 new_n, mutable_mask;

Really, this lacks consistency. Either you make N a u8 everywhere, or
a u64 everywhere. I don't mind either, but the type confusion is not
great.

> +
> +	mutex_lock(&kvm->arch.config_lock);
> +
> +	/*
> +	 * Make PMCR immutable once the VM has started running, but
> +	 * do not return an error to meet the existing expectations.
> +	 */
> +	if (kvm_vm_has_ran_once(vcpu->kvm)) {
> +		mutex_unlock(&kvm->arch.config_lock);
> +		return 0;
> +	}
> +
> +	new_n = (val >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
> +	if (new_n != kvm->arch.pmcr_n) {

Why do we need to check this?

> +		u8 pmcr_n_limit = kvm_arm_pmu_get_max_counters(kvm);

Can you see why I'm annoyed?

> +
> +		/*
> +		 * The vCPU can't have more counters than the PMU hardware
> +		 * implements. Ignore this error to maintain compatibility
> +		 * with the existing KVM behavior.
> +		 */
> +		if (new_n <= pmcr_n_limit)

Isn't this the only thing that actually matters?

> +			kvm->arch.pmcr_n = new_n;
> +	}
> +	mutex_unlock(&kvm->arch.config_lock);
> +
> +	/*
> +	 * Ignore writes to RES0 bits, read only bits that are cleared on
> +	 * vCPU reset, and writable bits that KVM doesn't support yet.
> +	 * (i.e. only PMCR.N and bits [7:0] are mutable from userspace)
> +	 * The LP bit is RES0 when FEAT_PMUv3p5 is not supported on the vCPU.
> +	 * But, we leave the bit as it is here, as the vCPU's PMUver might
> +	 * be changed later (NOTE: the bit will be cleared on first vCPU run
> +	 * if necessary).
> +	 */
> +	mutable_mask = (ARMV8_PMU_PMCR_MASK |
> +			(ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT));

Why is N part of the 'mutable' mask? The only bits that should make it
into the register are ARMV8_PMU_PMCR_MASK.

> +	val &= mutable_mask;
> +	val |= (__vcpu_sys_reg(vcpu, r->reg) & ~mutable_mask);
> +
> +	/* The LC bit is RES1 when AArch32 is not supported */
> +	if (!kvm_supports_32bit_el0())
> +		val |= ARMV8_PMU_PMCR_LC;
> +
> +	__vcpu_sys_reg(vcpu, r->reg) = val;
> +	return 0;

I think this should be rewritten as:

	val &= ARMV8_PMU_PMCR_MASK;
	/* The LC bit is RES1 when AArch32 is not supported */
	if (!kvm_supports_32bit_el0())
		val |= ARMV8_PMU_PMCR_LC;

	__vcpu_sys_reg(vcpu, r->reg) = val;
	return 0;

And that's it. Drop this 'mutable_mask' nonsense, as we should be
getting the correct value (merge of the per-vcpu register and VM-wide
N) since patch 4.

	M.

-- 
Without deviation from the norm, progress is not possible.

  reply	other threads:[~2023-10-23 13:00 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-20 21:40 [PATCH v8 00/13] KVM: arm64: PMU: Allow userspace to limit the number of PMCs on vCPU Raghavendra Rao Ananta
2023-10-20 21:40 ` [PATCH v8 01/13] KVM: arm64: PMU: Introduce helpers to set the guest's PMU Raghavendra Rao Ananta
2023-10-23 15:24   ` Sebastian Ott
2023-10-20 21:40 ` [PATCH v8 02/13] KVM: arm64: PMU: Set the default PMU for the guest before vCPU reset Raghavendra Rao Ananta
2023-10-23 10:40   ` Marc Zyngier
2023-10-23 18:24     ` Oliver Upton
2023-10-23 15:25   ` Sebastian Ott
2023-10-20 21:40 ` [PATCH v8 03/13] KVM: arm64: PMU: Add a helper to read a vCPU's PMCR_EL0 Raghavendra Rao Ananta
2023-10-23 16:18   ` Sebastian Ott
2023-10-20 21:40 ` [PATCH v8 04/13] KVM: arm64: PMU: Set PMCR_EL0.N for vCPU based on the associated PMU Raghavendra Rao Ananta
2023-10-23 11:50   ` Marc Zyngier
2023-10-23 16:20   ` Sebastian Ott
2023-10-24  9:22   ` Oliver Upton
2023-10-20 21:40 ` [PATCH v8 05/13] KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} Raghavendra Rao Ananta
2023-10-23 12:31   ` Marc Zyngier
2023-10-23 17:28     ` Raghavendra Rao Ananta
2023-10-24  8:59   ` Oliver Upton
2023-10-20 21:40 ` [PATCH v8 06/13] KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run Raghavendra Rao Ananta
2023-10-23 12:42   ` Marc Zyngier
2023-10-23 17:42     ` Raghavendra Rao Ananta
2023-10-23 18:07       ` Marc Zyngier
2023-10-20 21:40 ` [PATCH v8 07/13] KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest Raghavendra Rao Ananta
2023-10-23 13:00   ` Marc Zyngier [this message]
2023-10-23 17:53     ` Raghavendra Rao Ananta
2023-10-24 18:37   ` Oliver Upton
2023-10-20 21:40 ` [PATCH v8 08/13] tools: Import arm_pmuv3.h Raghavendra Rao Ananta
2023-10-20 21:40 ` [PATCH v8 09/13] KVM: selftests: aarch64: Introduce vpmu_counter_access test Raghavendra Rao Ananta
2023-10-20 21:40 ` [PATCH v8 10/13] KVM: selftests: aarch64: vPMU register test for implemented counters Raghavendra Rao Ananta
2023-10-20 21:40 ` [PATCH v8 11/13] KVM: selftests: aarch64: vPMU register test for unimplemented counters Raghavendra Rao Ananta
2023-10-24 18:29   ` Oliver Upton
2023-10-20 21:40 ` [PATCH v8 12/13] KVM: selftests: aarch64: vPMU test for validating user accesses Raghavendra Rao Ananta
2023-10-20 21:40 ` [PATCH v8 13/13] KVM: selftests: aarch64: vPMU test for immutability Raghavendra Rao Ananta
2023-10-24 10:36   ` Oliver Upton
2023-10-23 13:09 ` [PATCH v8 00/13] KVM: arm64: PMU: Allow userspace to limit the number of PMCs on vCPU Marc Zyngier
2023-10-23 17:58   ` Raghavendra Rao Ananta
2023-10-23 18:19     ` Marc Zyngier
2023-10-23 18:35 ` Marc Zyngier
2023-10-24 19:21   ` Oliver Upton
2023-10-25  0:01 ` Oliver Upton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86wmvd4hp9.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=alexandru.elisei@arm.com \
    --cc=coltonlewis@google.com \
    --cc=james.morse@arm.com \
    --cc=jingzhangos@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=pbonzini@redhat.com \
    --cc=rananta@google.com \
    --cc=reijiw@google.com \
    --cc=shahuang@redhat.com \
    --cc=suzuki.poulose@arm.com \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).