From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Marcin Wojtas <mw@semihalf.com>
Cc: "David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Jisheng Zhang <jszhang@marvell.com>,
Arnd Bergmann <arnd@arndb.de>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
"linux-arm-kernel\@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Nadav Haklai <nadavh@marvell.com>,
Dmitri Epshtein <dima@marvell.com>,
Yelena Krivosheev <yelena@marvell.com>
Subject: Re: [PATCH v5 net-next 0/7] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver
Date: Thu, 01 Dec 2016 17:09:15 +0100 [thread overview]
Message-ID: <871sxrk4wk.fsf@free-electrons.com> (raw)
In-Reply-To: <CAPv3WKdWyS0wCVsRKR86qpMx4r8NN9=RmjM9oHFy2mmvaR5PAA@mail.gmail.com> (Marcin Wojtas's message of "Thu, 1 Dec 2016 17:07:01 +0100")
Hi Marcin,
On jeu., déc. 01 2016, Marcin Wojtas <mw@semihalf.com> wrote:
> Hi Gregory,
>
> Checked on a388-gp with and without HWBM, also both ports work on
> a3700 (second one after changing to sgmii).
>
> Tested-by: Marcin Wojtas <mw@semihalf.com>
Thanks, I am going to send a new version with tour tested-by and the dts
fix for the second port.
Gregory
>
> Best regards,
> Marcin
>
> 2016-11-30 22:42 GMT+01:00 Gregory CLEMENT <gregory.clement@free-electrons.com>:
>> Hi,
>>
>> The Armada 37xx is a new ARMv8 SoC from Marvell using same network
>> controller as the older Armada 370/38x/XP SoCs. This series adapts the
>> driver in order to be able to use it on this new SoC. The main changes
>> are:
>>
>> - 64-bits support: the first patches allow using the driver on a 64-bit
>> architecture.
>>
>> - MBUS support: the mbus configuration is different on Armada 37xx
>> from the older SoCs.
>>
>> - per cpu interrupt: Armada 37xx do not support per cpu interrupt for
>> the NETA IP, the non-per-CPU behavior was added back.
>>
>> The first patch is an optimization in the rx path in swbm mode.
>> The second patch remove unnecessary allocation for HWBM.
>> The first item is solved by patches 4 and 5.
>> The 2 last items are solved by patch 6.
>> In patch 7 the dt support is added.
>>
>> Beside Armada 37xx, this series have been again tested on Armada XP
>> and Armada 38x (with Hardware Buffer Management and with Software
>> Buffer Management).
>>
>> This is the 5th version of the series:
>> - 1st version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/469588.html
>>
>> - 2nd version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/470476.html
>>
>> - 3rd version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/470901.html
>>
>> - 4th version:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/471039.html
>>
>> Changelog:
>> v4 -> v5:
>> - remove unnecessary cast in patch 3
>>
>> v3 -> v4:
>> - Adding new patch: "net: mvneta: do not allocate buffer in rxq init
>> with HWBM"
>>
>> - Simplify the HWBM case in patch 3 as suggested by Marcin
>>
>> v2 -> v3:
>> - Adding patch 1 "Optimize rx path for small frame"
>>
>> - Fix the kbuild error by moving the "phys_addr += pp->rx_offset_correction;"
>> line from patch 2 to patch 3 where rx_offset_correction is introduced.
>>
>> - Move the memory allocation of the buf_virt_addr of the rxq to be
>> called by the probe function in order to avoid a memory leak.
>>
>> Thanks,
>>
>> Gregory
>>
>> Gregory CLEMENT (5):
>> net: mvneta: Optimize rx path for small frame
>> net: mvneta: Do not allocate buffer in rxq init with HWBM
>> net: mvneta: Use cacheable memory to store the rx buffer virtual address
>> net: mvneta: Only disable mvneta_bm for 64-bits
>> ARM64: dts: marvell: Add network support for Armada 3700
>>
>> Marcin Wojtas (2):
>> net: mvneta: Convert to be 64 bits compatible
>> net: mvneta: Add network support for Armada 3700 SoC
>>
>> Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 +-
>> arch/arm64/boot/dts/marvell/armada-3720-db.dts | 23 +++++-
>> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 23 +++++-
>> drivers/net/ethernet/marvell/Kconfig | 10 +-
>> drivers/net/ethernet/marvell/mvneta.c | 344 +++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
>> 5 files changed, 305 insertions(+), 102 deletions(-)
>>
>> base-commit: 436accebb53021ef7c63535f60bda410aa87c136
>> --
>> git-series 0.8.10
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
prev parent reply other threads:[~2016-12-01 16:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-30 21:42 [PATCH v5 net-next 0/7] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 1/7] net: mvneta: Optimize rx path for small frame Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 2/7] net: mvneta: Do not allocate buffer in rxq init with HWBM Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 3/7] net: mvneta: Use cacheable memory to store the rx buffer virtual address Gregory CLEMENT
2016-12-01 11:38 ` Jisheng Zhang
2016-11-30 21:42 ` [PATCH v5 net-next 4/7] net: mvneta: Convert to be 64 bits compatible Gregory CLEMENT
2016-12-01 11:26 ` Jisheng Zhang
2016-12-01 11:41 ` Jisheng Zhang
2016-12-01 11:48 ` Marcin Wojtas
2016-12-01 12:02 ` Jisheng Zhang
2016-12-01 12:16 ` Jisheng Zhang
2016-12-01 12:33 ` Marcin Wojtas
2016-11-30 21:42 ` [PATCH v5 net-next 5/7] net: mvneta: Only disable mvneta_bm for 64-bits Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 6/7] net: mvneta: Add network support for Armada 3700 SoC Gregory CLEMENT
2016-11-30 21:42 ` [PATCH v5 net-next 7/7] ARM64: dts: marvell: Add network support for Armada 3700 Gregory CLEMENT
2016-12-01 16:05 ` Marcin Wojtas
2016-12-01 16:07 ` [PATCH v5 net-next 0/7] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver Marcin Wojtas
2016-12-01 16:09 ` Gregory CLEMENT [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871sxrk4wk.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=dima@marvell.com \
--cc=jason@lakedaemon.net \
--cc=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=yelena@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox