RE: [REGRESSION] Distorted sound on Acer Aspire A115-31 laptop

Kailang
2024-12-16T02:07:35Z

[-- Attachment #1: Type: text/plain, Size: 2327 bytes --]

Hi Kapun,

Please run attach script as below.

./alsa-info.sh --no-upload

Then send back the result.

> -----Original Message-----
> From: Evgeny Kapun <abacabadabacaba@gmail.com>
> Sent: Sunday, December 15, 2024 9:07 PM
> To: Linux Sound Mailing List <linux-sound@vger.kernel.org>
> Cc: Kailang <kailang@realtek.com>; Takashi Iwai <tiwai@suse.de>; Linux
> Kernel Mailing List <linux-kernel@vger.kernel.org>; Linux Regressions Mailing
> List <regressions@lists.linux.dev>; Linux Stable Mailing List
> <stable@vger.kernel.org>
> Subject: [REGRESSION] Distorted sound on Acer Aspire A115-31 laptop
>
>
> External mail.
>
>
>
> I am using an Acer Aspire A115-31 laptop. When running newer kernel
> versions, sound played through headphones is distorted, but when running
> older versions, it is not.
>
> Kernel version: Linux version 6.12.5 (user@hostname) (gcc (Debian
> 14.2.0-8) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.50.20241210) #1 SMP
> PREEMPT_DYNAMIC Sun Dec 15 05:09:16 IST 2024 Operating System: Debian
> GNU/Linux trixie/sid
>
> No special actions are needed to reproduce the issue. The sound is distorted all
> the time, and it doesn't depend on anything besides using an affected kernel
> version.
>
> It seems to be caused by commit
> 34ab5bbc6e82214d7f7393eba26d164b303ebb4e
> (ALSA: hda/realtek - Add Headset Mic supported Acer NB platform).
> Indeed, if I remove the entry that this commit adds, the issue disappears.
>
> lspci output for the device in question:
>
> 00:0e.0 Multimedia audio controller [0401]: Intel Corporation Celeron/Pentium
> Silver Processor High Definition Audio [8086:3198] (rev 06)
> Subsystem: Acer Incorporated [ALI] Device [1025:1360]
> Flags: bus master, fast devsel, latency 0, IRQ 130
> Memory at a1214000 (64-bit, non-prefetchable) [size=16K]
> Memory at a1000000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: [50] Power Management version 3
> Capabilities: [80] Vendor Specific Information: Len=14 <?>
> Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [70] Express Root Complex Integrated Endpoint, IntMsgNum
> 0
> Kernel driver in use: snd_hda_intel
> Kernel modules: snd_hda_intel, snd_soc_avs, snd_sof_pci_intel_apl

[-- Attachment #2: alsa-info.sh --]
[-- Type: application/octet-stream, Size: 27734 bytes --]

#!/bin/bash
echo 1 > /sys/module/snd_hda_codec/parameters/dump_coef
SCRIPT_VERSION=0.4.63
CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog"

#################################################################################
#Copyright (C) 2007 Free Software Foundation.

#This program is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2 of the License, or
#(at your option) any later version.

#This program is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.

#You should have received a copy of the GNU General Public License
#along with this program; if not, write to the Free Software
#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

##################################################################################

#The script was written for 2 main reasons:
# 1. Remove the need for the devs/helpers to ask several questions before we can easily help the user.
# 2. Allow newer/inexperienced ALSA users to give us all the info we need to help them.

#Set the locale (this may or may not be a good idea.. let me know)
export LC_ALL=C

#Change the PATH variable, so we can run lspci (needed for some distros)
PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin
BGTITLE="ALSA-Info v $SCRIPT_VERSION"
PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc"
#Define some simple functions

pbcheck(){
[[ $UPLOAD = "no" ]] && return

if [[ -z $PASTEBIN ]]; then
[[ $(ping -c1 www.alsa-project.org) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
else
[[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
fi
}

update() {
SHFILE=`mktemp -t alsa-info.XXXXXXXXXX` || exit 1
wget -O $SHFILE "http://www.alsa-project.org/alsa-info.sh" >/dev/null 2>&1
REMOTE_VERSION=`grep SCRIPT_VERSION $SHFILE |head -n1 |sed 's/.*=//'`
if [ "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
if [[ -n $DIALOG ]]
then
OVERWRITE=
if [ -w $0 ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
DIALOG_EXIT_CODE=$?
if [[ $DIALOG_EXIT_CODE = 0 ]]; then
OVERWRITE=yes
fi
fi
if [ -z "$OVERWRITE" ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0
DIALOG_EXIT_CODE=$?
fi
if [[ $DIALOG_EXIT_CODE = 0 ]]
then
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ "$OVERWRITE" = "yes" ]; then
cp $SHFILE $0
echo "ALSA-Info script has been updated to v $REMOTE_VERSION"
echo "Please re-run the script"
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded as $SHFILE."
echo "Please re-run the script from new location."
fi
exit
else
rm $SHFILE 2>/dev/null
fi
else
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ -w $0 ]; then
echo "The original file $0 will be overwritten!"
echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp
cp $SHFILE $0
echo "ALSA-Info script has been updated. Please re-run it."
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded $SHFILE."
echo "Please, re-run it from new location."
fi
exit
fi
else
rm $SHFILE 2>/dev/null
fi
}

cleanup() {
if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then
rm -rf "$TEMPDIR" 2>/dev/null
fi
test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
}

withaplay() {
echo "!!Aplay/Arecord output" >> $FILE
echo "!!--------------------" >> $FILE
echo "" >> $FILE
echo "APLAY" >> $FILE
echo "" >> $FILE
aplay -l >> $FILE 2>&1
echo "" >> $FILE
echo "ARECORD" >> $FILE
echo "" >> $FILE
arecord -l >> $FILE 2>&1
echo "" >> $FILE
}

withlsmod() {
echo "!!All Loaded Modules" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
lsmod |awk {'print $1'} >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}

withamixer() {
echo "!!Amixer output" >> $FILE
echo "!!-------------" >> $FILE
echo "" >> $FILE
for i in `grep "]: " /proc/asound/cards | awk -F ' ' '{ print $1} '` ; do
CARD_NAME=`grep "^ *$i " $TEMPDIR/alsacards.tmp|awk {'print $2'}`
echo "!!-------Mixer controls for card $i $CARD_NAME]" >> $FILE
echo "" >>$FILE
amixer -c$i info>> $FILE 2>&1
amixer -c$i>> $FILE 2>&1
echo "" >> $FILE
done
echo "" >> $FILE
}

withalsactl() {
echo "!!Alsactl output" >> $FILE
echo "!!--------------" >> $FILE
echo "" >> $FILE
exe=""
if [ -x /usr/sbin/alsactl ]; then
exe="/usr/sbin/alsactl"
fi
if [ -x /usr/local/sbin/alsactl ]; then
exe="/usr/local/sbin/alsactl"
fi
if [ -z "$exe" ]; then
exe=`whereis alsactl | cut -d ' ' -f 2`
fi
$exe -f $TEMPDIR/alsactl.tmp store
echo "--startcollapse--" >> $FILE
cat $TEMPDIR/alsactl.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}

withdevices() {
echo "!!ALSA Device nodes" >> $FILE
echo "!!-----------------" >> $FILE
echo "" >> $FILE
ls -la /dev/snd/* >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}

withconfigs() {
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e $HOME/.asoundrc.asoundconf ]]
then
echo "!!ALSA configuration files" >> $FILE
echo "!!------------------------" >> $FILE
echo "" >> $FILE

#Check for ~/.asoundrc
if [[ -e $HOME/.asoundrc ]]
then
echo "!!User specific config file (~/.asoundrc)" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for .asoundrc.asoundconf (seems to be Ubuntu specific)
if [[ -e $HOME/.asoundrc.asoundconf ]]
then
echo "!!asoundconf-generated config file" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc.asoundconf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
echo "!!System wide config file (/etc/asound.conf)" >> $FILE
echo "" >> $FILE
cat /etc/asound.conf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
fi
}

withsysfs() {
local i f
local printed=""
for i in /sys/class/sound/*; do
case "$i" in
*/hwC?D?)
if [ -f $i/init_pin_configs ]; then
if [ -z "$printed" ]; then
echo "!!Sysfs Files" >> $FILE
echo "!!-----------" >> $FILE
echo "" >> $FILE
fi
for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs hints; do
echo "$i/$f:" >> $FILE
cat $i/$f >> $FILE
echo >> $FILE
done
printed=yes
fi
;;
esac
done
if [ -n "$printed" ]; then
echo "" >> $FILE
fi
}

withdmesg() {
echo "!!ALSA/HDA dmesg" >> $FILE
echo "!!--------------" >> $FILE
echo "" >> $FILE
dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}

withall() {
withdevices
withconfigs
withaplay
withamixer
withalsactl
withlsmod
withsysfs
withdmesg
}

get_alsa_library_version() {
ALSA_LIB_VERSION=`grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null|awk {'print $3'}|sed 's/"//g'`

if [ -z "$ALSA_LIB_VERSION" ]; then
if [ -f /etc/lsb-release ]; then
. /etc/lsb-release
case "$DISTRIB_ID" in
Ubuntu)
if which dpkg > /dev/null ; then
ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -`
fi

if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
ALSA_LIB_VERSION=""
fi
return
;;
*)
return
;;
esac
elif [ -f /etc/debian_version ]; then
if which dpkg > /dev/null ; then
ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -`
fi

if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
ALSA_LIB_VERSION=""
fi
return
fi
fi
}

#Run checks to make sure the programs we need are installed.
LSPCI=$(which lspci 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
TPUT=$(which tput 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
DIALOG=$(which dialog 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null);

#Check to see if sysfs is enabled in the kernel. We'll need this later on
SYSFS=$(mount |grep sysfs|awk {'print $3'});

#Check modprobe config files for sound related options
SNDOPTIONS=$(modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p')

KEEP_OUTPUT=
NFILE=""

PASTEBIN=""
WWWSERVICE="www.alsa-project.org"
WELCOME="yes"
PROCEED="yes"
UPLOAD="ask"
REPEAT=""
while [ -z "$REPEAT" ]; do
REPEAT="no"
case "$1" in
--update|--help|--about)
WELCOME="no"
PROCEED="no"
;;
--upload)
UPLOAD="yes"
WELCOME="no"
;;
--no-upload)
UPLOAD="no"
WELCOME="no"
;;
--pastebin)
PASTEBIN="yes"
WWWSERVICE="pastebin"
;;
--no-dialog)
DIALOG=""
REPEAT=""
shift
;;
--stdout)
DIALOG=""
UPLOAD="no"
WELCOME="no"
TOSTDOUT="yes"
;;
esac
done

#Script header output.
if [ "$WELCOME" = "yes" ]; then
greeting_message="\

This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.

dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)

See '$0 --help' for command line options.
"
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" \
--title "ALSA-Info script v $SCRIPT_VERSION" \
--msgbox "$greeting_message" 20 80
else
echo "ALSA Information Script v $SCRIPT_VERSION"
echo "--------------------------------"
echo "$greeting_message"
fi # dialog
fi # WELCOME

#Set the output file
TEMPDIR=`mktemp -t -d alsa-info.XXXXXXXXXX` || exit 1
FILE="$TEMPDIR/alsa-info.txt"
if [ -z "$NFILE" ]; then
NFILE=`mktemp -t alsa-info.txt.XXXXXXXXXX` || exit 1
fi

trap cleanup 0

if [ "$PROCEED" = "yes" ]; then

if [ -z "$LSPCI" ]; then
if [ -d /sys/bus/pci ]; then
echo "This script requires lspci. Please install it, and re-run this script."
exit 0
fi
fi

#Fetch the info and store in temp files/variables
DISTRO=`grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus" /etc/{issue,*release,*version}`
KERNEL_VERSION=`uname -r`
KERNEL_PROCESSOR=`uname -p`
KERNEL_MACHINE=`uname -m`
KERNEL_OS=`uname -o`
[[ `uname -v | grep SMP` ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No"
ALSA_DRIVER_VERSION=`cat /proc/asound/version |head -n1|awk {'print $7'} |sed 's/\.$//'`
get_alsa_library_version
ALSA_UTILS_VERSION=`amixer -v |awk {'print $3'}`
LAST_CARD=$((`grep "]: " /proc/asound/cards | wc -l` - 1 ))

ESDINST=$(which esd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
PAINST=$(which pulseaudio 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ARTSINST=$(which artsd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
JACKINST=$(which jackd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ROARINST=$(which roard 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
DMIDECODE=$(which dmidecode 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)

#Check for DMI data
if [ -d /sys/class/dmi/id ]; then
# No root privileges are required when using sysfs method
DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)
DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null)
DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null)
DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null)
elif [ -x $DMIDECODE ]; then
DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null)
DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null)
DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null)
DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null)
fi

cat /proc/asound/modules 2>/dev/null|awk {'print $2'}>$TEMPDIR/alsamodules.tmp
cat /proc/asound/cards >$TEMPDIR/alsacards.tmp
if [[ ! -z "$LSPCI" ]]; then
lspci |grep -i "multi\|audio">$TEMPDIR/lspci.tmp
fi

#Check for HDA-Intel cards codec#*
cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null

#Check for AC97 cards codec
cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2> /dev/null
cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs > $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null

#Check for USB mixer setup
cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null

#Fetch the info, and put it in $FILE in a nice readable format.
if [[ -z $PASTEBIN ]]; then
echo "upload=true&script=true&cardinfo=" > $FILE
else
echo "name=$USER&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=" > $FILE
fi
echo "!!################################" >> $FILE
echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
echo "!!################################" >> $FILE
echo "" >> $FILE
echo "!!Script ran on: `LANG=C TZ=UTC date`" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Linux Distribution" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo $DISTRO >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!DMI Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
echo "Manufacturer: $DMI_SYSTEM_MANUFACTURER" >> $FILE
echo "Product Name: $DMI_SYSTEM_PRODUCT_NAME" >> $FILE
echo "Product Version: $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE
echo "Firmware Version: $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Kernel Information" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo "Kernel release: $KERNEL_VERSION" >> $FILE
echo "Operating System: $KERNEL_OS" >> $FILE
echo "Architecture: $KERNEL_MACHINE" >> $FILE
echo "Processor: $KERNEL_PROCESSOR" >> $FILE
echo "SMP Enabled: $KERNEL_SMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ALSA Version" >> $FILE
echo "!!------------" >> $FILE
echo "" >> $FILE
echo "Driver version: $ALSA_DRIVER_VERSION" >> $FILE
echo "Library version: $ALSA_LIB_VERSION" >> $FILE
echo "Utilities version: $ALSA_UTILS_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Loaded ALSA modules" >> $FILE
echo "!!-------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsamodules.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Sound Servers on this system" >> $FILE
echo "!!----------------------------" >> $FILE
echo "" >> $FILE
if [[ -n $PAINST ]];then
[[ `pgrep '^(.*/)?pulseaudio$'` ]] && PARUNNING="Yes" || PARUNNING="No"
echo "Pulseaudio:" >> $FILE
echo " Installed - Yes ($PAINST)" >> $FILE
echo " Running - $PARUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ESDINST ]];then
[[ `pgrep '^(.*/)?esd$'` ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
echo "ESound Daemon:" >> $FILE
echo " Installed - Yes ($ESDINST)" >> $FILE
echo " Running - $ESDRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ARTSINST ]];then
[[ `pgrep '^(.*/)?artsd$'` ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
echo "aRts:" >> $FILE
echo " Installed - Yes ($ARTSINST)" >> $FILE
echo " Running - $ARTSRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $JACKINST ]];then
[[ `pgrep '^(.*/)?jackd$'` ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
echo "Jack:" >> $FILE
echo " Installed - Yes ($JACKINST)" >> $FILE
echo " Running - $JACKRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ROARINST ]];then
[[ `pgrep '^(.*/)?roard$'` ]] && ROARRUNNING="Yes" || ROARRUNNING="No"
echo "RoarAudio:" >> $FILE
echo " Installed - Yes ($ROARINST)" >> $FILE
echo " Running - $ROARRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" && -z "$ROARINST" ]];then
echo "No sound servers found." >> $FILE
echo "" >> $FILE
fi
echo "" >> $FILE
echo "!!Soundcards recognised by ALSA" >> $FILE
echo "!!-----------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsacards.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE

if [[ ! -z "$LSPCI" ]]; then
echo "!!PCI Soundcards installed in the system" >> $FILE
echo "!!--------------------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/lspci.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Advanced information - PCI Vendor/Device/Subsystem ID's" >> $FILE
echo "!!-------------------------------------------------------" >> $FILE
echo "" >> $FILE
lspci -vvn |grep -A1 040[1-3] >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

if [ "$SNDOPTIONS" ]
then
echo "!!Modprobe options (Sound related)" >> $FILE
echo "!!--------------------------------" >> $FILE
echo "" >> $FILE
modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

if [ -d "$SYSFS" ]
then
echo "!!Loaded sound module options" >> $FILE
echo "!!---------------------------" >> $FILE
echo "" >> $FILE
for mod in `cat /proc/asound/modules|awk {'print $2'}`;do
echo "!!Module: $mod" >> $FILE
for params in `echo $SYSFS/module/$mod/parameters/*`; do
echo -ne "\t";
echo "$params : `cat $params`" | sed 's:.*/::';
done >> $FILE
echo "" >> $FILE
done
echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then
echo "!!HDA-Intel Codec information" >> $FILE
echo "!!---------------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then
echo "!!AC97 Codec information" >> $FILE
echo "!!----------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-ac97.tmp >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then
echo "!!USB Mixer information" >> $FILE
echo "!!---------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

#If no command line options are specified, then run as though --with-all was specified
if [ -z "$1" ]; then
update
withall
pbcheck
fi

fi # proceed

#loop through command line arguments, until none are left.
if [ -n "$1" ]; then
until [ -z "$1" ]
do
case "$1" in
--pastebin)
update
withall
pbcheck
;;
--update)
update
exit
;;
--upload)
UPLOAD="yes"
withall
;;
--no-upload)
UPLOAD="no"
withall
;;
--output)
shift
NFILE="$1"
KEEP_OUTPUT="yes"
;;
--debug)
echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
KEEP_FILES="yes"
echo ""
withall
;;
--with-all)
withall
;;
--with-aplay)
withaplay
;;
--with-amixer)
withamixer
;;
--with-alsactl)
withalsactl
;;
--with-devices)
withdevices
;;
--with-dmesg)
withdmesg
;;
--with-configs)
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]]
then
echo "!!ALSA configuration files" >> $FILE
echo "!!------------------------" >> $FILE
echo "" >> $FILE

#Check for ~/.asoundrc
if [[ -e $HOME/.asoundrc ]]
then
echo "!!User specific config file ($HOME/.asoundrc)" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
echo "!!System wide config file (/etc/asound.conf)" >> $FILE
echo "" >> $FILE
cat /etc/asound.conf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
fi
;;
--stdout)
UPLOAD="no"
withall
cat $FILE
rm $FILE
;;
--about)
echo "Written/Tested by the following users of #alsa on irc.freenode.net:"
echo ""
echo " wishie - Script author and developer / Testing"
echo " crimsun - Various script ideas / Testing"
echo " gnubien - Various script ideas / Testing"
echo " GrueMaster - HDA Intel specific items / Testing"
echo " olegfink - Script update function"
echo " TheMuso - display to stdout functionality"
exit 0
;;
*)
echo "alsa-info.sh version $SCRIPT_VERSION"
echo ""
echo "Available options:"
echo " --with-aplay (includes the output of aplay -l)"
echo " --with-amixer (includes the output of amixer)"
echo " --with-alsactl (includes the output of alsactl)"
echo " --with-configs (includes the output of ~/.asoundrc and"
echo " /etc/asound.conf if they exist)"
echo " --with-devices (shows the device nodes in /dev/snd/)"
echo " --with-dmesg (shows the ALSA/HDA kernel messages)"
echo ""
echo " --output FILE (specify the file to output for no-upload mode)"
echo " --update (check server for script updates)"
echo " --upload (upload contents to remote server)"
echo " --no-upload (do not upload contents to remote server)"
echo " --pastebin (use http://pastebin.ca) as remote server"
echo " instead www.alsa-project.org"
echo " --stdout (print alsa information to standard output"
echo " instead of a file)"
echo " --about (show some information about the script)"
echo " --debug (will run the script as normal, but will not"
echo " delete $FILE)"
exit 0
;;
esac
shift 1
done
fi

if [ "$PROCEED" = "no" ]; then
exit 1
fi

if [ "$UPLOAD" = "ask" ]; then
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE != 0 ]; then
UPLOAD="no"
else
UPLOAD="yes"
fi
else
echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
read -e CONFIRM
if [ "$CONFIRM" != "y" ]; then
UPLOAD="no"
else
UPLOAD="yes"
fi
fi

fi

if [ "$UPLOAD" = "no" ]; then

if [ -z "$TOSTDOUT" ]; then
mv -f $FILE $NFILE || exit 1
KEEP_OUTPUT="yes"
fi

if [[ -n $DIALOG ]]
then
if [[ -n $PBERROR ]]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
else
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
fi
else
echo

if [[ -n $PBERROR ]]; then
echo "An error occurred while contacting the $WWWSERVICE."
echo "Your information was NOT automatically uploaded."
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
else
if [ -z "$TOSTDOUT" ]; then
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
fi
fi
fi

exit

fi # UPLOAD

#Test that wget is installed, and supports --post-file. Upload $FILE if it does, and prompt user to upload file if it doesnt.
if
WGET=$(which wget 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null); [[ -n "${WGET}" ]] && [[ -x "${WGET}" ]] && [[ `wget --help |grep post-file` ]]
then

if [[ -n $DIALOG ]]
then

if [[ -z $PASTEBIN ]]; then
wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://www.alsa-project.org/cardinfo-db/" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
{ for i in 10 20 30 40 50 60 70 80 90; do
echo $i
sleep 0.2
done
echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.alsa-project.org ..." 6 70 0
else
wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY&encrypt=t&encryptpw=blahblah" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
{ for i in 10 20 30 40 50 60 70 80 90; do
echo $i
sleep 0.2
done
echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.pastebin.ca ..." 6 70 0
fi

dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE = 0 ]; then
grep -v "alsa-info.txt" $FILE >$TEMPDIR/uploaded.txt
dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/uploaded.txt 0 0
fi

clear

# no dialog
else

if [[ -z $PASTEBIN ]]; then
echo -n "Uploading information to www.alsa-project.org ... "
wget -O - --tries=5 --timeout=60 --post-file=$FILE http://www.alsa-project.org/cardinfo-db/ &>$TEMPDIR/wget.tmp &
else
echo -n "Uploading information to www.pastebin.ca ... "
wget -O - --tries=5 --timeout=60 --post-file=$FILE http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY &>$TEMPDIR/wget.tmp &
fi

#Progess spinner for wget transfer.
i=1
sp="/-\|"
echo -n ' '
while pgrep wget &>/dev/null
do
echo -en "\b${sp:i++%${#sp}:1}"
done

echo -e "\b Done!"
echo ""

fi #dialog

#See if tput is available, and use it if it is.
if [ -n "$TPUT" ]; then
if [[ -z $PASTEBIN ]]; then
FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2 ; tput sgr0`
else
FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p';tput sgr0`
fi
else
if [[ -z $PASTEBIN ]]; then
FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2`
else
FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p'`
fi
fi

# Output the URL of the uploaded file.
echo "Your ALSA information is located at $FINAL_URL"
echo "Please inform the person helping you."
echo ""

# We couldnt find a suitable wget, so tell the user to upload manually.
else
mv -f $FILE $NFILE || exit 1
KEEP_OUTPUT="yes"
if [[ -z $DIALOG ]]
then
if [[ -z $PASTEBIN ]]; then
echo ""
echo "Could not automatically upload output to http://www.alsa-project.org"
echo "Possible reasons are:"
echo " 1. Couldnt find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to http://www.alsa-project.org/cardinfo-db/ and submit your post."
echo ""
else
echo ""
echo "Could not automatically upload output to http://www.pastebin.ca"
echo "Possible reasons are:"
echo " 1. Couldnt find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post."
echo ""
fi
else
if [[ -z $PASTEBIN ]]; then
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.alsa-project.org.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.alsa-project,org/cardinfo-db/ and submit your post." 25 100
else
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.pastebin.ca.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post." 25 100
fi
fi
fi