From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>,
Frederic Weisbecker <frederic@kernel.org>,
John Stultz <jstultz@google.com>,
Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Eric Biederman <ebiederm@xmission.com>,
Oleg Nesterov <oleg@redhat.com>
Subject: [patch v6.1 17/20] signal: Queue ignored posixtimers on ignore list
Date: Sat, 02 Nov 2024 22:05:08 +0100 [thread overview]
Message-ID: <8734k9qrcr.ffs@tglx> (raw)
In-Reply-To: <20241031154425.624061922@linutronix.de>
Queue posixtimers which have their signal ignored on the ignored list:
1) When the timer fires and the signal has SIG_IGN set
2) When SIG_IGN is installed via sigaction() and a timer signal
is already queued
This completes the SIG_IGN handling and such timers are not longer self
rearmed which avoids pointless wakeups.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
V6.1: Handle oneshot timer expiry or transitioning from periodic to
oneshot after a rearming correctly. - Frederic
---
kernel/signal.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 65 insertions(+), 5 deletions(-)
---
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -731,6 +731,16 @@ void signal_wake_up_state(struct task_st
kick_process(t);
}
+static inline void posixtimer_sig_ignore(struct task_struct *tsk, struct sigqueue *q);
+
+static void sigqueue_free_ignored(struct task_struct *tsk, struct sigqueue *q)
+{
+ if (likely(!(q->flags & SIGQUEUE_PREALLOC) || q->info.si_code != SI_TIMER))
+ __sigqueue_free(q);
+ else
+ posixtimer_sig_ignore(tsk, q);
+}
+
/* Remove signals in mask from the pending set and queue. */
static void flush_sigqueue_mask(struct task_struct *p, sigset_t *mask, struct sigpending *s)
{
@@ -747,7 +757,7 @@ static void flush_sigqueue_mask(struct t
list_for_each_entry_safe(q, n, &s->list, list) {
if (sigismember(mask, q->info.si_signo)) {
list_del_init(&q->list);
- __sigqueue_free(q);
+ sigqueue_free_ignored(p, q);
}
}
}
@@ -1964,7 +1974,7 @@ int posixtimer_send_sigqueue(struct k_it
int sig = q->info.si_signo;
struct task_struct *t;
unsigned long flags;
- int ret, result;
+ int result;
guard(rcu)();
@@ -1981,13 +1991,48 @@ int posixtimer_send_sigqueue(struct k_it
*/
tmr->it_sigqueue_seq = tmr->it_signal_seq;
- ret = 1; /* the signal is ignored */
if (!prepare_signal(sig, t, false)) {
result = TRACE_SIGNAL_IGNORED;
+
+ /* Paranoia check. Try to survive. */
+ if (WARN_ON_ONCE(!list_empty(&q->list)))
+ goto out;
+
+ /* Periodic timers with SIG_IGN are queued on the ignored list */
+ if (tmr->it_status == POSIX_TIMER_REQUEUE_PENDING) {
+ /*
+ * Already queued means the timer was rearmed after
+ * the previous expiry got it on the ignore list.
+ * Nothing to do for that case.
+ */
+ if (hlist_unhashed(&tmr->ignored_list)) {
+ /*
+ * Take a signal reference and queue it on
+ * the ignored list.
+ */
+ posixtimer_sigqueue_getref(q);
+ posixtimer_sig_ignore(t, tmr);
+ }
+ } else if (!hlist_unhashed(&tmr->ignored_list)) {
+ /*
+ * Covers the case where a timer was periodic and
+ * then signal was ignored. Then it was rearmed as
+ * oneshot timer. The previous signal is invalid
+ * now, and the oneshot signal has to be dropped.
+ * Remove it from the ignored list and drop the
+ * reference count as the signal is not longer
+ * queued.
+ */
+ hlist_del_init(&tmr->ignored_list);
+ posixtimer_putref(tmr);
+ }
goto out;
}
- ret = 0;
+ /* This should never happen and leaks a reference count */
+ if (WARN_ON_ONCE(!hlist_unhashed(&tmr->ignored_list)))
+ hlist_del_init(&tmr->ignored_list);
+
if (unlikely(!list_empty(&q->list))) {
/* This holds a reference count already */
result = TRACE_SIGNAL_ALREADY_PENDING;
@@ -2000,7 +2045,21 @@ int posixtimer_send_sigqueue(struct k_it
out:
trace_signal_generate(sig, &q->info, t, tmr->it_pid_type != PIDTYPE_PID, result);
unlock_task_sighand(t, &flags);
- return ret;
+ return 0;
+}
+
+static inline void posixtimer_sig_ignore(struct task_struct *tsk, struct sigqueue *q)
+{
+ struct k_itimer *tmr = container_of(q, struct k_itimer, sigq);
+
+ /*
+ * Only enqueue periodic timer signals to the ignored list. For
+ * oneshot timers, drop the reference count.
+ */
+ if (tmr->it_status == POSIX_TIMER_REQUEUE_PENDING)
+ hlist_add_head(&tmr->ignored_list, &tsk->signal->ignored_posix_timers);
+ else
+ posixtimer_putref(tmr);
}
static void posixtimer_sig_unignore(struct task_struct *tsk, int sig)
@@ -2048,6 +2107,7 @@ static void posixtimer_sig_unignore(stru
}
}
#else /* CONFIG_POSIX_TIMERS */
+static inline void posixtimer_sig_ignore(struct task_struct *tsk, struct sigqueue *q) { }
static inline void posixtimer_sig_unignore(struct task_struct *tsk, int sig) { }
#endif /* !CONFIG_POSIX_TIMERS */
next prev parent reply other threads:[~2024-11-02 21:05 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-31 15:46 [patch v6 00/20] posix-timers: Cure the SIG_IGN mess Thomas Gleixner
2024-10-31 15:46 ` [patch v6 01/20] posix-timers: Make signal delivery consistent Thomas Gleixner
2024-11-01 12:26 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 02/20] posix-timers: Make signal overrun accounting sensible Thomas Gleixner
2024-11-01 12:51 ` Frederic Weisbecker
2024-11-01 20:36 ` Thomas Gleixner
2024-11-02 19:41 ` Thomas Gleixner
2024-11-02 22:57 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 03/20] posix-cpu-timers: Cleanup the firing logic Thomas Gleixner
2024-11-01 13:14 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 04/20] posix-cpu-timers: Use dedicated flag for CPU timer nanosleep Thomas Gleixner
2024-10-31 15:46 ` [patch v6 05/20] posix-timers: Add a refcount to struct k_itimer Thomas Gleixner
2024-10-31 15:46 ` [patch v6 06/20] signal: Split up __sigqueue_alloc() Thomas Gleixner
2024-10-31 15:46 ` [patch v6 07/20] signal: Provide posixtimer_sigqueue_init() Thomas Gleixner
2024-10-31 15:46 ` [patch v6 08/20] posix-timers: Store PID type in the timer Thomas Gleixner
2024-10-31 15:46 ` [patch v6 09/20] signal: Refactor send_sigqueue() Thomas Gleixner
2024-10-31 15:46 ` [patch v6 10/20] signal: Replace resched_timer logic Thomas Gleixner
2024-11-01 13:25 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 11/20] posix-timers: Embed sigqueue in struct k_itimer Thomas Gleixner
2024-10-31 15:46 ` [patch v6 12/20] signal: Cleanup unused posix-timer leftovers Thomas Gleixner
2024-10-31 15:46 ` [patch v6 13/20] posix-timers: Move sequence logic into struct k_itimer Thomas Gleixner
2024-10-31 15:46 ` [patch v6 14/20] signal: Provide ignored_posix_timers list Thomas Gleixner
2024-10-31 15:46 ` [patch v6 15/20] posix-timers: Handle ignored list on delete and exit Thomas Gleixner
2024-11-01 13:47 ` Frederic Weisbecker
2024-11-01 20:38 ` Thomas Gleixner
2024-10-31 15:46 ` [patch v6 16/20] signal: Handle ignored signals in do_sigaction(action != SIG_IGN) Thomas Gleixner
2024-11-01 14:04 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 17/20] signal: Queue ignored posixtimers on ignore list Thomas Gleixner
2024-11-01 14:21 ` Frederic Weisbecker
2024-11-01 20:47 ` Thomas Gleixner
2024-11-02 14:49 ` Thomas Gleixner
2024-11-02 20:57 ` Thomas Gleixner
2024-11-02 23:46 ` Frederic Weisbecker
2024-11-03 9:44 ` Thomas Gleixner
2024-11-03 19:55 ` Frederic Weisbecker
2024-11-02 21:05 ` Thomas Gleixner [this message]
2024-11-04 11:42 ` [patch v6.1 " Frederic Weisbecker
2024-11-04 15:21 ` Thomas Gleixner
2024-11-04 21:31 ` Thomas Gleixner
2024-11-04 23:02 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 18/20] posix-timers: Cleanup SIG_IGN workaround leftovers Thomas Gleixner
2024-10-31 15:46 ` [patch v6 19/20] alarmtimers: Remove the throttle mechanism from alarm_forward_now() Thomas Gleixner
2024-10-31 15:46 ` [patch v6 20/20] alarmtimers: Remove return value from alarm functions Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8734k9qrcr.ffs@tglx \
--to=tglx@linutronix.de \
--cc=anna-maria@linutronix.de \
--cc=ebiederm@xmission.com \
--cc=frederic@kernel.org \
--cc=jstultz@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=oleg@redhat.com \
--cc=peterz@infradead.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox